Intel 3168NGW 듀얼 밴드 무선 AC 3168 WiFi 카드 사용 설명서

1. 서론

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Intel 3168NGW Dual Band Wireless-AC 3168 WiFi Card. Please read this manual thoroughly before installation and use to ensure proper functionality and to prevent damage.

The Intel 3168NGW is a compact M.2 2230 form factor card designed to provide high-speed 802.11ac Wi-Fi and Bluetooth 4.2 connectivity to compatible systems.

2. 안전 정보

• 내부 부품을 설치하거나 제거하기 전에 항상 컴퓨터의 전원을 차단하십시오.
• Handle the card by its edges to avoid touching the gold connectors or sensitive components. Electrostatic discharge (ESD) can damage the card.
• Ensure proper grounding when working inside your computer.
• 카드를 습기와 극한 온도에 노출시키지 마십시오.
• This product is intended for installation by qualified personnel.

3. 패키지 내용

패키지에 모든 품목이 들어 있는지 확인하세요.

• Intel 3168NGW Dual Band Wireless-AC 3168 WiFi Card
• (Antennas and mounting screw may be included depending on retailer/kit)

4. 설정 및 설치

This section outlines the general steps for installing the Intel 3168NGW WiFi Card. Specific steps may vary depending on your computer's make and model.

4.1. 설치 전 체크리스트

• Compatible M.2 2230 slot (Key E) on your motherboard or laptop.
• 작은 십자 드라이버.
• 정전기 방지 손목 스트랩(권장).
• Internet access (for driver download).

4.2. 설치 단계

1. 전원 끄기 및 연결 해제: Shut down your computer completely and disconnect the power cord and any other peripherals.
2. 컴퓨터 케이스 열기: Open your computer's case or access panel to expose the motherboard. Refer to your computer's manual for specific instructions.
3. M.2 슬롯 찾기: Identify an available M.2 2230 slot (often labeled "Key E" or "WiFi").
4. WiFi 카드를 삽입하세요: Carefully align the Intel 3168NGW card with the M.2 slot. Insert the card at a slight angle (approximately 30 degrees) and gently push it into the slot until it is fully seated.
5. 카드를 안전하게 보호하세요: Once seated, push the card down towards the motherboard. Secure it with the small screw provided with your computer or the card (if included).
6. Attach Antennas (if applicable): If your system uses external antennas, carefully connect the antenna cables to the corresponding connectors on the WiFi card (Main and Aux). Ensure a secure connection.
7. 컴퓨터 케이스 닫기: Replace the computer's access panel or close the case.
8. 전원 다시 연결: Reconnect the power cord and other peripherals.
9. 전원 켜기: 컴퓨터를 켜세요.

Image 1: Intel 3168NGW Dual Band Wireless-AC 3168 WiFi Card. This image displays the Intel 3168NGW WiFi card, an M.2 2230 form factor component. The card features a green PCB with a white label detailing the model number (3168NGW), part numbers (G86C0007K310, 852511-001), and regulatory information. Two small gold antenna connectors are visible at one end, labeled "MAIN" and "AUX". The M.2 connector pins are visible at the opposite end.

5. 사용 설명서

5.1. 드라이버 설치

After physical installation, you will need to install the appropriate drivers for the WiFi and Bluetooth functionalities.

1. 초기 부팅: Upon booting your computer, the operating system may automatically detect the new hardware and attempt to install generic drivers.
2. 최신 드라이버 다운로드: For optimal performance and stability, it is highly recommended to download the latest drivers directly from the official Intel support web대지. 검색 "Intel Wireless-AC 3168 drivers" and "Intel Bluetooth 4.2 drivers".
3. 드라이버 설치: Run the downloaded driver installation packages and follow the on-screen prompts. You may need to restart your computer after installation.
4. 설치 확인: Open Device Manager (Windows) or System Information (macOS/Linux) to confirm that the Intel Wireless-AC 3168 and Bluetooth 4.2 devices are recognized and functioning correctly.

5.2. Wi-Fi 네트워크에 연결하기

1. 운영체제 설정에서 Wi-Fi가 활성화되어 있는지 확인하십시오.
2. 시스템 트레이(Windows) 또는 메뉴 막대(macOS)에 있는 Wi-Fi 아이콘을 클릭하세요.
3. 사용 가능한 네트워크 목록에서 원하는 Wi-Fi 네트워크를 선택하세요.
4. (필요한 경우) 네트워크 암호를 입력하고 "연결"을 클릭하십시오.

5.3. 블루투스 기기 페어링

1. 운영 체제 설정에서 Bluetooth가 활성화되어 있는지 확인하세요.
2. Bluetooth 기기를 페어링 모드로 전환하세요(기기 설명서를 참조하세요).
3. Go to your computer's Bluetooth settings and search for new devices.
4. 목록에서 기기를 선택하고 화면에 나타나는 메시지에 따라 페어링 과정을 완료하세요.

6. 유지관리

• 드라이버 업데이트 : Regularly check the Intel support web최적의 성능과 보안을 보장하기 위해 드라이버를 업데이트할 수 있는 사이트입니다.
• 물리적 검사: Periodically inspect the card and antenna connections for any signs of damage or loose connections.
• 청소: If necessary, gently clean any dust accumulation on the card using compressed air. Ensure the computer is powered off and disconnected before cleaning.

7. 문제 해결

7.1. Wi-Fi or Bluetooth Not Detected

• 물리적 연결을 확인하세요. Ensure the card is properly seated in the M.2 slot and secured.
• 안테나 연결: Verify that antenna cables are securely attached to the card.
• 장치 관리자: Check Device Manager (Windows) for any yellow exclamation marks or unknown devices. Reinstall drivers if necessary.
• BIOS/UEFI 설정: Some motherboards may have an option to enable/disable M.2 slots or wireless functionality in the BIOS/UEFI settings. Ensure it is enabled.

7.2. Poor Wi-Fi Performance or Disconnections

• 드라이버 업데이트: Ensure you have the latest drivers installed from Intel.
• 라우터 근접성: 와이파이 공유기 또는 액세스 포인트에 더 가까이 이동하세요.
• 간섭: Other electronic devices (cordless phones, microwaves) can cause interference. Try changing your router's Wi-Fi channel.
• 안테나 배치: If using external antennas, ensure they are positioned for optimal signal reception.

7.3. 블루투스 페어링 문제

• 장치 호환성: Ensure the Bluetooth device you are trying to pair is compatible with Bluetooth 4.2.
• 페어링 모드 : Confirm the Bluetooth device is in pairing mode.
• 블루투스 서비스 재시작: Try disabling and re-enabling Bluetooth in your computer's settings.
• 기존 페어링 제거: If you've previously paired the device, remove it from your computer's Bluetooth list and try pairing again.

8. 사양

9. 보증 및 지원

보증 정보 및 기술 지원에 대해서는 인텔 공식 웹사이트를 참조하십시오. website or contact your point of purchase. Intel provides comprehensive support resources, including driver downloads, troubleshooting guides, and customer service contacts.

인텔 지원 Web대지: www.intel.com/support