1. 제품 오버view
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- Mechanical Brake: Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- 대용량 모터: Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- 인체공학적 디자인: Compact and ergonomic form for comfortable handling.
- Tool-Free Guard Adjustment: The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. 안전 지침
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
일반 안전
- 안전 안경, 청력 보호 장비, 장갑, 방진 마스크 등 적절한 개인 보호 장비(PPE)를 항상 착용하세요.
- 공작물이 단단히 고정되었는지 확인하십시오.amp수술 전에 편집됨.
- Keep hands clear of rotating parts and the cutting/grinding area.
- 가연성 액체, 가스 또는 먼지가 있는 곳과 같이 폭발성 환경에서 공구를 작동하지 마십시오.
- 전동공구를 작동하는 동안 어린이와 주변 사람을 멀리하십시오.
전기 안전
- 전원 공급 장치 볼륨을 확인하십시오.tage는 공구 명판에 표시된 등급과 일치합니다.
- 코드를 남용하지 마십시오. 코드를 사용하여 전동 공구를 운반, 당기거나 플러그를 뽑지 마십시오. 코드를 열, 오일, 날카로운 모서리 또는 움직이는 부품에서 멀리하십시오.
- 광고에서 전동공구를 작동하는 경우amp 위치가 불가피한 경우 잔류 전류 장치(RCD)로 보호된 전원을 사용하십시오.
Specific Angle Grinder Safety
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. 구성품 및 특징
주요 구성 요소:
- 본문: Houses the motor, electronics, and gearbox.
- 보호 가드: Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- 스핀들 잠금 버튼: 디스크 교체가 간편합니다.
- 슬라이드 스위치: 연속 작동을 위해 잠금 기능이 있습니다.
- 속도 선택 다이얼: For variable speed control (see Figure 2).
- 통풍구: For motor cooling and dust expulsion.
4. 설정
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
Mounting the Protective Guard
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- 스핀들 잠금 버튼을 길게 누릅니다.
- Place the inner clamp스핀들에 플랜지를 끼웁니다.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- CL에 나사amping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- 스핀들 잠금 버튼을 놓습니다.
5. 사용 설명서
전원 켜기/끄기
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
가변 속도 제어
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- 분쇄기는 항상 양손으로 단단히 잡으십시오.
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. 유지관리
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
청소
- 청소하기 전에 항상 도구의 플러그를 뽑으십시오.
- 먼지가 쌓여 과열되는 것을 방지하기 위해 통풍구를 정기적으로 청소하십시오. 가능하면 압축 공기를 사용하십시오.
- 도구 외부를 광고로 닦으세요amp 옷감. 강한 화학 물질이나 연마성 세제를 사용하지 마십시오.
카본 브러쉬
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
저장
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 도구가 시작되지 않음 | 전원 공급이 없습니다 Restart interlock activated (after power failure) 손상된 전원 코드 | 전원 연결을 확인하세요 Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| 작업 중 공구가 멈춤 | 과부하 보호 활성화됨 Disc jammed (anti-kickback activated) | 압력을 줄이고 공구가 식을 때까지 기다리십시오. Release switch, clear obstruction, then restart |
| 과도한 진동 | Worn or damaged disc 디스크가 잘못 장착됨 손잡이가 느슨함 | 디스크 교체 Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | 마모된 카본 브러쉬 Dust buildup in vents | Have brushes inspected/replaced by service center 환기구를 철저히 청소하세요 |
8. 사양
| 특성 | 값 |
|---|---|
| 모델 번호 | 447668 |
| 전원 입력 | 1700와트 |
| 전력 출력 | 1050와트 |
| 권tage | 230V(XNUMXV) |
| 빈도 | 50/60Hz |
| 최대 디스크 직경 | 125mm (XNUMXmm) |
| 무부하 속도 | 2800-11500 분당 |
| Tool Holder (Angle Grinder) | M14 |
| 케이블 길이 | 4분 |
| 치수(길이 x 너비 x 높이) | 340 x 77 x 105mm |
| 무게 | 2.6kg |
| 색상 | Red, Black, Silver |
| 재료 | 금속 |
9. 보증 및 지원
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex web사이트 또는 제품 포장에 표시하세요.
