Artemide TLM0100

아르테미데 톨로메오 메가 플로어 Lamp (모델 TLM0100) 사용 설명서

소개

This manual provides detailed instructions for the safe and efficient assembly, operation, and maintenance of your Artemide Tolomeo Mega Floor Lamp설치하기 전에 이 설명서를 꼼꼼히 읽고 나중에 참조할 수 있도록 보관하십시오.

중요한 안전 정보

화재, 감전, 신체 상해의 위험을 줄이려면 전기 제품을 사용할 때 항상 기본적인 안전 예방 조치를 따르세요.

  • Ensure the power supply is disconnected before assembly, disassembly, or cleaning.
  • l을 조작하지 마십시오.amp 코드나 플러그가 손상된 경우.
  • 지정된 전구 유형 및 와트만 사용하십시오.tage (E26, up to 150W incandescent or equivalent LED).
  • l을 유지하세요amp 물과 습기로부터 멀리하십시오.
  • 이 lamp 실내에서만 사용하도록 설계되었습니다.
  • l을 수정하려고 시도하지 마십시오amp 어떤 식으로든.

설정 및 조립

The Artemide Tolomeo Mega Floor Lamp is designed for straightforward assembly. It typically arrives in multiple packages. Ensure all components are present before beginning.

  1. 구성 요소 풀기: Carefully remove all parts from the packaging. Verify that you have the base, main support stem, adjustable arm sections, shade, and any necessary fasteners. Refer to the packing list if provided.
  2. Assemble the Base and Stem: Attach the main support stem to the circular base. Ensure it is securely fastened.
  3. Attach Arm Sections: Connect the adjustable arm sections to the main stem and to each other, following the design of the lamp. The joints and tension control knobs should allow for smooth movement.
  4. 그늘 설치: Secure the parchment diffuser shade to the lamp 머리.
  5. 전구 삽입: Carefully screw an E26 base bulb (up to 150W incandescent or equivalent LED) into the lamp 소켓입니다. 너무 세게 조이지 마십시오.
  6. L을 위치시키세요amp: l을 놓으세요amp 안정적이고 수평인 표면에.
  7. 전원에 연결: 전원 코드를 표준 전기 콘센트에 꽂으세요.

메모: Assembly may require minor adjustments to tension control knobs for optimal arm movement. Refer to the image below for a visual guide to the assembled lamp 구조.

아르테미데 톨로메오 메가 플로어 Lamp 조립하다

Figure 1: Fully assembled Artemide Tolomeo Mega Floor Lamp, 보여 주다asing its adjustable arm and parchment diffuser.

작동 지침

The Artemide Tolomeo Mega Floor Lamp features intuitive controls and adjustable components for versatile lighting.

전원 켜기/끄기

난amp is equipped with a pull chain switch. Gently pull the chain to turn the lamp 켜기 또는 끄기.

L 조정amp 위치

난amp's arm structure is highly adjustable. You can modify the extension, height, and angle of the lamp head to direct light precisely where needed.

  • 팔 뻗기: The articulated arm can extend from approximately 44.5 inches to 77.5 inches.
  • 고정 높이 : The overall height of the fixture can be adjusted from 58.25 inches to 128.75 inches.
  • Shade Angle: The shade can be tilted to direct light.

주의: When adjusting, hold the arm firmly to prevent sudden movements. Do not force joints beyond their natural range of motion.

아르테미데 톨로메오 메가 플로어 Lamp 거실 환경에서

Figure 2: The Artemide Tolomeo Mega Floor Lamp positioned in a room, demonstrating its extensive reach and adjustability.

관리 및 유지 보수

Regular care will help maintain the appearance and functionality of your Artemide Tolomeo Mega Floor Lamp.

  • 청소: l을 분리합니다amp from the power supply before cleaning. Use a soft, dry cloth to wipe down the aluminum surfaces. For the parchment diffuser, use a very lightly dampened cloth if necessary, and dry immediately. Avoid abrasive cleaners or solvents.
  • 전구 교체: l을 확인하세요amp is unplugged and the bulb has cooled before attempting to replace it. Unscrew the old bulb and screw in a new E26 base bulb (up to 150W incandescent or equivalent LED).
  • Joints and Tension: Periodically check the joints and tension control knobs. If the arm feels too loose or too stiff, gently adjust the tension knobs as needed. Do not overtighten.

문제 해결

If you encounter issues with your Artemide Tolomeo Mega Floor Lamp, 다음의 일반적인 문제와 해결책을 참조하세요.

문제가능한 원인해결책
Lamp 켜지지 않습니다.No power to the outlet, loose plug, faulty bulb, or faulty switch.Check if the outlet is working with another device. Ensure the plug is fully inserted. Replace the bulb. If the issue persists, contact customer support.
빛이 깜박입니다.Loose bulb, incorrect bulb type, or unstable power supply.Tighten the bulb. Ensure the bulb wattage and type are correct. Try plugging into a different outlet.
Arm is difficult to adjust or sags.Tension control knobs require adjustment.Gently adjust the tension control knobs at the joints until the desired movement and stability are achieved.
Lamp 특이한 소리를 낸다.Loose components or internal wiring issue.Disconnect power immediately. Inspect for any loose parts. Do not attempt to repair internal wiring. Contact customer support.

명세서

Detailed technical specifications for the Artemide Tolomeo Mega Floor Lamp (Model TLM0100).

  • 모델: TLM0100
  • 상표: 아르테미데
  • 마감 유형 : 광택 알루미늄
  • 기본 재료: 알류미늄
  • 그늘 재질 : Parchment Diffuser
  • 전구베이스: E26
  • 최대 와트tage Per Bulb: 150W (Incandescent)
  • 광원 유형: Incandescent, LED compatible
  • 권tage: 120 볼트
  • 스위치 유형: 풀 체인
  • 기본 직경: 12.5인치
  • 그늘 직경: 12.63인치
  • 그늘 높이: 8.69인치
  • Adjustable Arm Extension: 44.5인치에서 77.5인치까지
  • Adjustable Fixture Height: 58.25인치에서 128.75인치까지
  • Adjustable Fixture Width: 13인치에서 73.25인치까지
  • 품목 무게: 약 35kg(15.88파운드)
  • 실내/실외 사용: 실내 전용
  • 특징: Highly adjustable design

보증 및 고객 지원

Artemide products are manufactured to high standards. For specific warranty information regarding your Tolomeo Mega Floor Lamp, please refer to the documentation included with your purchase or visit the official Artemide web대지.

If you require technical assistance, have questions about assembly, or need to report a defect, please contact Artemide customer support directly. Contact details can typically be found on the manufacturer's web사이트 또는 제품 포장.

제조업체: 아르테미데

모델 번호: TLM0100