Eglo 98187 Solar Wall Light Instruction Manual

1. 서론

Thank you for choosing the Eglo 98187 Solar Wall Light. This outdoor spotlight is designed to provide illumination in garden areas, patios, or entrances where electrical wiring is not readily available. Featuring an integrated motion sensor and an external solar panel, it offers convenience, security, and energy efficiency. Please read this manual carefully before installation and use to ensure proper operation and longevity of your product.

Figure 1: Eglo 98187 Solar Wall Light in an outdoor setting.

2. 안전 지침

• Ensure the product is installed on a stable surface and in a location where it will not be easily damaged.
• Do not attempt to modify or disassemble the light or solar panel. This may void the warranty and pose a safety risk.
• 최적의 충전 성능을 보장하려면 태양광 패널을 깨끗하게 유지하세요.
• This product is designed for outdoor use and has an IP44 rating, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. However, do not submerge it in water.
• 현지 규정에 따라 배터리를 책임감 있게 폐기하세요.

3. 패키지 내용

설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.

• 1 x Eglo 98187 Solar Wall Light unit with integrated LED board
• 1 x External Solar Panel
• 장착 하드웨어(나사, 벽면 플러그)
• 사용 설명서

4. 사양

그림 2: 제품 치수

5. 설정 및 설치

Follow these steps to install your Eglo 98187 Solar Wall Light:

1. 위치를 선택하세요: Select a wall or surface for the light unit and a separate location for the solar panel. The solar panel requires direct sunlight for at least 6 hours daily to fully charge the battery. Avoid shaded areas.
2. 조명 장치를 설치하세요:
   • Mark the drilling points on the wall using the light unit as a template.
   • 구멍을 뚫고 제공된 벽면 플러그를 꽂으세요.
   • Secure the light unit to the wall using the provided screws.
   

   Figure 3: Mounting points and switch on the light unit.
3. 태양 전지판 장착:
   • Position the solar panel in a location that receives maximum direct sunlight throughout the day.
   • Mark and drill holes, then secure the solar panel bracket using the provided screws.
   • 태양광 패널의 각도를 조정하여 햇빛 노출을 최적화하십시오.
   

   Figure 4: Solar panel and light unit connection.

4. 태양광 패널 연결: Plug the cable from the solar panel into the input port on the light unit. Ensure the connection is secure.
5. 초기 청구 : Allow the solar panel to charge the battery for at least 24-48 hours in direct sunlight before first use to ensure optimal performance.

Figure 5: Installation diagram.

6. 사용 설명서

The Eglo 98187 Solar Wall Light features a multi-function switch and an integrated motion sensor.

1. 스위치 설정: Locate the switch on the back of the light unit (refer to Figure 3). It typically has three positions: AUTO, OFF, and ON.
   • 자동 : This is the recommended setting. The light will automatically turn on at dusk when motion is detected within its range. It will turn off after a set period of no motion.
   • OFF : The light will remain off, regardless of motion or ambient light. Use this setting for storage or if you do not wish for the light to operate.
   • 에: The light will remain continuously on at night until the battery drains or dawn breaks. This setting is not recommended for daily use as it will deplete the battery quickly.
2. 모션 센서: The integrated motion sensor has a detection angle of 90 degrees and a range of up to 8 meters. Ensure the sensor is not obstructed for optimal performance.
3. 자동 작동: In AUTO mode, the light charges during the day via the solar panel. At night, it will activate when motion is detected, providing illumination for safety and convenience.

그림 6: 전면 view of the light unit with LED and motion sensor.

7. 유지관리

Regular maintenance ensures optimal performance and extends the lifespan of your solar wall light.

• 태양광 패널 청소: 부드러운 천으로 태양광 패널을 주기적으로 닦아주세요.amp 천으로 먼지, 이물질, 이물질을 제거하세요. 패널이 깨끗하면 충전 효율이 높아집니다.
• 조명 장치 청소: Clean the light unit and motion sensor lens with a soft, dry cloth. Avoid abrasive cleaners or solvents.
• 배터리 교체: The light uses 3 AA batteries. While included, these are typically rechargeable and designed for long-term use. If the light's performance significantly degrades over time (e.g., shorter illumination time), the rechargeable batteries may need replacement. Use only rechargeable AA batteries of the same type and capacity.
• 계절 조정: In winter months or periods of reduced sunlight, ensure the solar panel is free of snow or ice and adjust its angle if necessary to capture maximum available light.

8. 문제 해결

If your Eglo 98187 Solar Wall Light is not functioning as expected, try the following solutions:

• 밤에 불이 켜지지 않습니다:
  • 스위치가 설정되어 있는지 확인하십시오. 자동차.
  • Verify the solar panel is clean and receiving at least 6 hours of direct sunlight daily.
  • Check the connection cable between the solar panel and the light unit.
  • The battery may be depleted. Allow several days of full sunlight charging.
• 동작 센서가 감지하지 못하고 있습니다:
  • 센서 렌즈가 깨끗하고 막힘이 없는지 확인하십시오.
  • Verify the light is installed within the recommended detection range (up to 8 meters).
  • Test the sensor by walking directly in front of it at night.
• Light stays on continuously or flashes:
  • 스위치가 설정되어 있는지 확인하십시오. 자동차, not ON.
  • Insufficient charge can sometimes cause erratic behavior. Allow for more charging time.

9. 보증 및 지원

EGLO products are manufactured to high-quality standards. For warranty information, please refer to the documentation provided at the time of purchase or visit the official EGLO website. If you encounter any issues that cannot be resolved using the troubleshooting guide, please contact EGLO customer support or your retailer for assistance.

EGLO 연락처 정보:
방문해주세요 www.eglo.com 지역별 연락처 및 지원 정보는 해당 웹사이트를 참조하십시오.