BRIKSMAX LED Lighting Kit for Technic Chevrolet Corvette ZR1 (Lego 42093) - User Manual

소개

This user manual provides comprehensive instructions for installing, operating, and maintaining your BRIKSMAX LED Lighting Kit designed specifically for the Lego Technic Chevrolet Corvette ZR1 (Lego Set 42093). This kit enhances your model with realistic lighting effects, bringing it to life. Please read all instructions carefully before beginning installation.

The Lego Technic Chevrolet Corvette ZR1 model illuminated with the BRIKSMAX LED Lighting Kit.

안전 정보

• 이 제품에는 작은 부품이 포함되어 있으며 질식 위험이 있으므로 3세 미만 어린이에게는 적합하지 않습니다.
• Keep all components away from water and excessive heat.
• Do not attempt to modify or disassemble the LED lights or wires, as this may damage the product and void the warranty.
• Ensure proper battery installation (polarity) to prevent damage to the battery holder or lights.
• 유지보수 또는 조정을 하기 전에 항상 전원을 차단하십시오.

패키지 내용

Before beginning installation, please verify that all components listed below are included in your BRIKSMAX LED Lighting Kit package. The Lego model itself is not included.

Visual representation of the components included in the BRIKSMAX LED Lighting Kit.

• 2 x 30cm White Dot Lights
• 4 x 15cm Blue Dot Lights
• 4 x 30cm Red Dot Lights
• 1 x Warm White Strip Light
• 1 x 15cm 연결 케이블
• 1 x AA Battery Holder (Batteries not included)
• 1 x 접착 사각형
• 1 x 30cm USB Power Cable
• 1 x 12-port Expansion Boards
• 사용 설명서(본 문서)

설치 지침

Follow these steps carefully to install the LED lighting kit onto your Lego Technic Chevrolet Corvette ZR1 (42093) model. It is recommended to have the original Lego instruction manual handy for reference during disassembly and reassembly.

1. 모델 준비하기

Before installing the lights, identify the sections of your Lego model where the lights will be placed. This kit is designed to integrate seamlessly, often requiring partial disassembly of certain sections of the model to route wires and secure lights. Refer to the detailed step-by-step instruction guide provided in your kit for specific disassembly and reassembly steps.

The visual impact of the lighting kit on the Lego Corvette ZR1 model.

2. Connecting the Lights

Each light component (dot lights, strip lights) has a small connector. These connectors plug into the expansion boards. The expansion boards then connect to the battery holder or USB power cable. Ensure all connections are firm but do not force them.

• 헤드라이트: Use the white dot lights for the front headlights. Carefully route the wires through the existing gaps in the Lego bricks.
• 후미등: The red dot lights are for the rear taillights.
• Interior/Cabin Light: The warm white strip light is typically used for the interior cabin, providing ambient illumination.
• Underbody/Accent Lights: The blue dot lights can be used for underbody lighting or other accent areas as desired.
• 와이어 관리: Use the adhesive squares to secure wires discreetly within the model, preventing them from being pinched or visible.

상세한 view of the illuminated front section of the model.

The rear of the model showcasing the red taillights and blue accent lighting.

The interior of the Corvette model illuminated by the warm white strip light.

3. 전원 연결

The kit can be powered using either the AA battery holder (requires 3x AA batteries, not included) or the USB power cable. Connect your chosen power source to the main expansion board.

설치 과정에 대한 시각적 가이드는 아래 공식 제품 비디오를 참조하세요.

작동 지침

Once the lighting kit is fully installed and connected to a power source:

• If using the battery holder, ensure batteries are correctly inserted and the switch on the battery holder is in the "ON" position.
• If using the USB power cable, connect it to a compatible USB power source (e.g., USB wall adapter, power bank, computer USB port). The lights should illuminate automatically.
• To turn off the lights, either switch the battery holder to "OFF" or disconnect the USB power cable.

유지

• 청소: Use a soft, dry cloth to gently wipe dust from the LED lights and wires. Avoid using liquid cleaners directly on the electronic components.
• 저장: When not in use for extended periods, disconnect the power source (remove batteries or unplug USB cable) to prevent battery drain or potential damage. Store the model in a cool, dry place away from direct sunlight.
• 와이어 무결성: Periodically check wires for any signs of wear, pinching, or damage. Ensure they are securely routed and not under tension.

문제 해결

명세서

보증 및 지원

BRIKSMAX offers customer support for their products. If you encounter any difficulties with your product, including missing parts or technical issues, please contact the manufacturer directly.

• 연락하다: Refer to the contact information provided in your kit's packaging or visit the official BRIKSMAX store on Amazon.
• 보증: 구체적인 보증 내용은 다를 수 있습니다. 보증 청구를 위해서는 구매 증빙 자료를 보관해 주십시오.
• 보고: 이 제품은 아마존을 통해 30일 이내 환불/교환이 가능합니다.

추가 지원이 필요한 경우 다음을 방문하세요. BRIKSMAX Store on Amazon.