1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of your MokerLink 6 Port PoE Switch (Model 4 PoE + 2 FE). This unmanaged switch is designed to provide both data and power over Ethernet cables to compatible devices, simplifying network deployment. Please read this manual thoroughly before using the device to ensure proper and safe operation.
2. 제품 오버view
2.1 주요 특징
- 6 포트: Includes 4 Power over Ethernet (PoE) ports and 2 Fast Ethernet (FE) Uplink ports, all supporting 10/100Mbps speed.
- High PoE Power: Maximum support of 78W total output power, with a built-in power supply. Each PoE port provides up to 30W, compliant with IEEE 802.3af/at standards. Note: Does not support passive 24V PoE.
- 관리되지 않는 플러그 앤 플레이: Features Power Detection function to automatically identify and power PoE-compatible devices. Provides data connectivity for non-PoE devices. No configuration required.
- 기능을 확장하십시오: When activated, PoE ports can extend data and power transmission up to 250 meters (820 ft) at 10Mbps, with port isolation for enhanced network safety.
- 내구성 있는 디자인: Built with a fanless metal housing for quiet operation and effective heat dissipation. Includes LED indicator lights for status monitoring.
- 다양한 응용 프로그램: Suitable for IP cameras, Wireless Access Points, IP Phones, and other network devices.
2.2 패키지 내용
- 1 x MokerLink 6 Port 10/100Mbps PoE+ Switch (4 PoE + 2 FE)
- 1 x AC 전원 케이블
- 4 x Screws with nuts
- 2 x Hanger (for mounting)
- 1 x 사용자 설명서
2.3 전면 패널 레이아웃
The front panel of the switch features all network ports and status indicators.
Figure 1: Front Panel of the MokerLink 6 Port PoE Switch. It displays 4 PoE ports (1-4), 2 Uplink ports (5-6), a power indicator, and an Extend/Default mode switch.
- PoE 포트(1-4): These four ports support Power over Ethernet (PoE+) and data transmission at 10/100Mbps. Connect PoE-compatible devices such as IP cameras or Wireless Access Points here.
- Uplink Ports (5-6): These two ports are Fast Ethernet (FE) uplink ports, supporting 10/100Mbps data transmission. Connect these to your router, NVR, or other network devices for data connectivity.
- 전원 표시기: 스위치에 전원이 들어오면 불이 들어옵니다.
- Extend/Default Switch: Toggles between standard operation (Default) and extended range mode (Extend).
2.4 후면 패널 레이아웃
The rear panel contains the AC power input.
Figure 2: Rear Panel of the MokerLink 6 Port PoE Switch. It features the standard AC power input socket.
3. 설정
3.1 물리적 설치
- 놓기: Place the switch on a stable, flat surface or mount it to a wall using the provided hangers and screws. Ensure adequate ventilation around the device.
- 전원 연결: Connect the supplied AC power cable to the power input on the rear panel of the switch and then to a standard electrical outlet. The Power LED on the front panel should illuminate.
Figure 3: Wall mounting option for the PoE Switch.
3.2 네트워크 연결
- PoE 장치 연결: Use standard Ethernet cables to connect your PoE-compatible devices (e.g., IP cameras, Wireless APs) to ports 1-4. The switch will automatically detect and power these devices.
- Connect Non-PoE Devices/Uplink: Connect your router, NVR, or other non-PoE network devices to the Uplink ports (5-6) using standard Ethernet cables. These ports provide data connectivity only.
Figure 4: Connecting various devices to the PoE switch. IP cameras, Wireless APs, and IP phones connect to PoE ports for data and power. Routers, computers, and NVRs connect to uplink ports for data only.
4. 사용 설명서
The MokerLink 6 Port PoE Switch is a plug-and-play device, requiring no software configuration. Once powered on and connected, it will automatically begin functioning.
4.1 LED 표시등
Monitor the status of the switch and connected devices using the front panel LEDs:
- 전원 LED:
- 에: 스위치가 켜져 있습니다.
- 끄다: 스위치의 전원이 꺼져 있습니다.
- 링크/동작 LED(포트당):
- 에: A device is connected and a link is established.
- 깜박임 : 포트에서 데이터 활동이 발생하고 있습니다.
- 끄다: No device is connected or no link is established.
- PoE LED 표시등(PoE 포트당):
- 에: Power is being supplied to the connected PoE device.
- 끄다: No power is being supplied (either not a PoE device or an issue exists).
5. Extend Mode and VLAN Function
5.1 확장 모드
The switch features an 'Extend' mode, controlled by a physical switch on the front panel. This mode is useful for deploying PoE devices over longer distances.
Figure 5: Comparison of Default and Extend modes for PoE range and speed.
- 기본 모드: Standard operation, supporting up to 100 meters (328 ft) at 10/100Mbps.
- 확장 모드: When the switch is set to 'Extend', the PoE ports (1-4) can transmit data and power up to 250 meters (820 ft). In this mode, the data speed for these ports is reduced to 10Mbps. This is ideal for long-distance surveillance camera deployments.
5.2 Port Isolation (VLAN)
When the 'Extend' mode is active, the PoE ports (1-4) are isolated from each other. This means that devices connected to these ports cannot directly communicate with each other, enhancing network security and preventing broadcast storms. All isolated ports can still communicate with the Uplink ports (5-6).
Figure 6: Port Isolation (VLAN) in Extend Mode. Devices on ports 1-4 are isolated from each other but can communicate with uplink ports.
6. 유지관리
6.1 청소
- Ensure the switch is powered off and unplugged before cleaning.
- 부드럽고 마른 천으로 기기 외부를 닦으세요.
- 액체나 에어로졸 세척제는 기기를 손상시킬 수 있으므로 사용하지 마십시오.
6.2 환경 고려 사항
- Operate the switch within the specified temperature range of -10°C to 55°C (14°F to 131°F).
- 스위치를 직사광선이나 열원 근처에 두지 마십시오.
- Ensure proper airflow around the device, especially since it is fanless and relies on passive cooling.
- Keep the switch away from moisture and excessive dust.
Figure 7: Fanless design for silent operation.
7. 문제 해결
If you encounter issues with your MokerLink PoE Switch, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원 LED 표시 없음 | 전원 케이블이 연결되지 않았거나 전원 공급 장치에 문제가 있습니다. | Ensure the AC power cable is securely connected to the switch and a working power outlet. Test the outlet with another device. |
| 연결된 장치에 대한 링크/작동 LED가 없습니다. | Faulty Ethernet cable, incorrect port connection, or device issue. | Verify the Ethernet cable is securely connected at both ends. Try a different cable. Ensure the device is powered on and functioning correctly. |
| PoE 장치가 전원을 공급받지 못하고 있습니다(PoE LED 꺼짐). | Device is not PoE-compatible, cable issue, or power budget exceeded. | Confirm the device is IEEE 802.3af/at compliant. Check the Ethernet cable for damage. Ensure the total power consumption of all PoE devices does not exceed 78W. |
| Slow network speed in Extend mode | 이것은 예상 된 동작입니다. | In Extend mode, the speed is intentionally reduced to 10Mbps to achieve longer transmission distances. This is not a fault. |
| PoE 포트에 연결된 장치들은 서로 통신할 수 없습니다. | Extend mode is active, enabling port isolation. | This is the intended function of port isolation in Extend mode. If direct communication between PoE devices is required, switch the device to Default mode. |
8. 사양
The following table outlines the technical specifications for the MokerLink 6 Port PoE Switch (4 PoE + 2 FE):
| 특징 | 사양 |
|---|---|
| 모델 번호 | 4 PoE + 2 FE |
| 포트 수 | 6 (4 PoE+, 2 Fast Ethernet Uplink) |
| 데이터 전송 속도 | 10/100Mbps |
| PoE 표준 | IEEE 802.3af / at |
| 최대 PoE 전력 | 78와트(총) |
| PoE 포트당 최대 전력 | 30 와트 |
| 인터페이스 유형 | RJ45 |
| 케이스 소재 | 금속 |
| 팬이없는 디자인 | 예 |
| 확장 모드 범위 | Up to 250 meters (820 ft) at 10Mbps |
| 작동 온도 | -10°C ~ 55°C(14°F ~ 131°F) |
| 제품 치수 | 7.87 x 4.65 x 1.73 인치 |
| 품목 무게 | 1.89파운드 |
| 입력 Voltage | AC 100-240V (Built-in Power Supply) |
9. 안전 정보
- 장치를 열지 마십시오.asing. 내부에는 사용자가 수리할 수 있는 부품이 없습니다.
- 장치를 물, 불, 습기 또는 더운 환경에서 멀리하세요.
- 기기와 함께 제공된 전원 어댑터만 사용하세요.
- 전기 안전을 위해 적절한 접지를 확인하십시오.
- 스위치 위에 무거운 물건을 올려 놓지 마십시오.
- 천둥번개가 칠 때나 장기간 사용하지 않을 때는 전원을 차단하십시오.
Figure 8: MokerLink PoE Switch with key features.
10. 보증 및 지원
10.1 보증 정보
This MokerLink product is typically covered by a standard return policy, which allows for returns or replacements within 30 days of purchase. Please refer to your purchase platform's specific return policy for detailed terms and conditions.
10.2 기술 지원
For technical assistance or further inquiries regarding your MokerLink 6 Port PoE Switch, please contact MokerLink customer support through their official channels or the retailer from whom the product was purchased. Contact information can usually be found on the MokerLink official web사이트 또는 제품 포장 내부에 넣어 두세요.
