소개
The GBC ShredMaster SX20-08 is a high-performance cross-cut paper shredder designed for secure disposal of sensitive documents. It offers a P-4 security level, shredding documents into small 5/32" x 1 1/2" pieces. With a capacity to shred up to 20 sheets at a time and an 8-gallon pull-out bin, it is suitable for home offices and small business environments. Key features include a long 240-minute run time, auto-reverse jam prevention, Whisper Shred Technology for quiet operation, and an Eco Power Save function for energy efficiency.
중요한 안전 정보
Please read all safety instructions carefully before operating the shredder. Failure to follow these instructions may result in injury or damage to the unit.
- Keep hands, hair, loose clothing, and jewelry away from the paper entry slot.
- Do not insert more than the maximum recommended sheet capacity (20 sheets) at one time.
- 파쇄기를 사용하지 않을 때나 청소, 이동, 또는 쓰레기통을 비우기 전에는 전원 플러그를 뽑으십시오.
- 파쇄기에 에어로졸이나 윤활유를 분사하지 마십시오.
- This shredder is intended for indoor use only.
- 어린이나 애완동물이 파쇄기 근처에 접근하지 못하게 하십시오.
- 파쇄기는 평평하고 안정적인 표면에서 작동하십시오.
- 경고: 이 제품은 캘리포니아 주에서 암과 선천적 결함 또는 기타 생식적 피해를 유발하는 것으로 알려진 납을 포함한 화학 물질에 노출될 수 있습니다. 자세한 내용은 www.P65Warnings.ca.gov.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- GBC ShredMaster SX20-08 Paper Shredder Unit
- 쓰레기통
- 사용 설명서(본 문서)
설정
- 짐 풀기: 파쇄기를 포장에서 조심스럽게 꺼내십시오. 나중에 운반하거나 보관할 때를 위해 포장재를 보관하십시오.
- 놓기: Position the shredder on a level, stable surface near a standard electrical outlet. Ensure adequate ventilation around the unit.
- 쓰레기통 설치: Ensure the 8-gallon waste bin is correctly inserted into the shredder cabinet. The shredder will not operate if the bin is not properly seated.
- 전원 연결: 전원 코드를 접지된 콘센트에 꽂으세요.
Figure 1: GBC ShredMaster SX20-08 ready for setup.
작동 지침
기본 동작
- 전원 켜기: Press the power button on the control panel. The shredder will enter standby mode, indicated by an LED light.
- 문서 입력: Insert paper directly into the paper entry slot. The shredder will automatically detect the paper and begin shredding. Do not exceed the 20-sheet capacity. The shredder can also handle staples and paperclips.
- 연속 실행 시간: The shredder is designed for a 240-minute continuous run time, making it suitable for large shredding tasks. Allow the unit to cool down if it reaches its thermal limit.
- Auto Reverse Jam Prevention: In case of an overload or jam, the shredder features an auto-reverse function to clear the jam. If a jam persists, manually reverse the shredder using the control panel.
- Whisper Shred Technology: This technology ensures quiet operation, maintaining noise levels below 58 dB to minimize disruptions in office environments.
- Eco Power Save: To conserve energy, the shredder will automatically turn off after 2 minutes of inactivity.
Figure 2: Feeding documents into the shredder.
LED 표시등
The control panel features LED indicator lights to provide operational status:
- 빈이 가득 찼습니다: Illuminates when the waste bin is full and needs to be emptied.
- 문 열림: Indicates that the waste bin is not properly closed or seated. The shredder will not operate until the bin is correctly positioned.
- 과열: Lights up if the shredder has been used continuously for too long and needs to cool down. Allow the unit to rest before resuming operation.
- 과부하: Activates if too many sheets are inserted at once, triggering the auto-reverse function.
Figure 3: The 8-gallon pull-out waste bin.
Figure 4: The P-4 security level ensures confidential shredding.
유지
쓰레기통 비우기
When the "Bin Full" indicator illuminates, the waste bin needs to be emptied. Simply pull out the bin from the front of the shredder, dispose of the shredded material, and slide the bin back into place until it clicks securely.
청소
- 분쇄기를 청소하기 전에는 항상 전원을 뽑으십시오.
- 분쇄기 외부를 부드럽고 마른 천으로 닦으십시오. 연마성 세척제나 용제를 사용하지 마십시오.
- 종이 투입구 부분을 주기적으로 청소하여 종이 먼지나 이물질을 제거하십시오.
분쇄기에 기름칠하기
For optimal performance and longevity, it is recommended to oil the shredder blades regularly, especially after emptying the waste bin or after heavy use. Use shredder oil specifically designed for paper shredders. Apply a thin line of oil across the paper entry slot and then run a few sheets of paper through the shredder to distribute the oil.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 분쇄기가 작동하지 않습니다. | 전원 없음; 쓰레기통이 제대로 삽입되지 않았습니다; 과열 방지 기능이 작동했습니다. | Check power cord connection and outlet; Ensure waste bin is fully inserted and "Door Open" indicator is off; Allow shredder to cool down if "Over Heat" indicator is on. |
| 종이 걸림. | Too many sheets inserted; Paper not fed straight. | Utilize the auto-reverse function or manually reverse the shredder; Remove excess paper; Feed paper straight. |
| 파쇄기가 작동 중에 멈춥니다. | Waste bin full; Overheat protection activated; Bin not properly seated. | Empty waste bin; Allow shredder to cool down; Re-insert waste bin securely. |
| 분쇄기가 시끄럽습니다. | Blades require oiling; Debris in cutting mechanism. | Oil the shredder blades as per maintenance instructions; Unplug and carefully inspect for debris. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 | SX20-08 (1758502) |
| 파쇄형 | 샛길 |
| 보안 수준 | P-4 (5/32" x 1 1/2" particles) |
| 시트 용량 | Up to 20 sheets (20 lb bond paper) |
| 빈 용량 | 8갤런 |
| 실행 시간 | 240분 연속 |
| 냉각 시간 | Not specified, allow adequate time after overheat. |
| 소음 수준 | Below 58 dB (Whisper Shred Technology) |
| 치수(길이 x 너비 x 높이) | 26.97 x 18.5 x 14.76 인치 |
| 품목 무게 | 0.01 온스 (Note: The provided weight of 0.01 ounces may be a data entry error. Actual weight is typically much higher for a shredder of this capacity.) |
| 파쇄물 | Paper, staples, paperclips |
보증 및 지원
GBC products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, including duration and coverage, please refer to the warranty card included with your product or visit the official GBC web대지.
For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact GBC Customer Service. Contact information can typically be found on the GBC web사이트나 제품 포장에 표시하세요.
You can also visit the official GBC Store on Amazon for more product information and support: GBC Store
