셰파흐 DP16VLS 기둥형 드릴 사용 설명서

1. 서론

This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your Scheppach DP16VLS Pillar Drill. Please read these instructions carefully before using the machine to ensure proper function and to prevent injury or damage.

Image 1: Scheppach DP16VLS Pillar Drill with included vice.

2. 안전 지침

Always observe general safety regulations when working with power tools. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.

일반 안전 경고:

• 작업 영역 안전: 작업 공간을 깨끗하고 밝게 유지하십시오. 어수선하거나 어두운 곳은 사고의 위험이 있습니다. 가연성 액체, 가스 또는 먼지가 있는 곳 등 폭발 위험이 있는 환경에서는 전동 공구를 작동하지 마십시오.
• 전기 안전: 전동 공구 플러그는 콘센트와 일치해야 합니다. 플러그를 어떤 식으로든 개조하지 마십시오. 접지된 표면에 신체가 닿지 않도록 하십시오.
• 개인 안전: Always wear eye protection. Use hearing protection when operating the drill. Wear appropriate clothing; avoid loose clothing or jewelry that can get caught in moving parts. Secure long hair.
• 도구 사용 및 관리: 전동 공구에 무리한 힘을 가하지 마십시오. 사용 용도에 맞는 전동 공구를 사용하십시오. 조정, 액세서리 교체 또는 전동 공구 보관 시에는 반드시 전원 플러그를 분리하십시오.

Specific Pillar Drill Safety:

• Always secure the workpiece firmly to the drill table using the included vice or clamps. Never hold the workpiece by hand.
• Ensure the drill bit is correctly installed and tightened in the chuck before operation.
• Adjust the drilling depth stop to prevent drilling into the drill table.
• Keep hands clear of the rotating drill bit and all moving parts.
• Allow the motor to reach full speed before beginning to drill.
• Do not attempt to clear chips or debris while the drill is operating.

3. 제품 오버view 및 기능

The Scheppach DP16VLS is a robust pillar drill designed for precise drilling in various materials including wood, metal, aluminum, and plastic. It features a powerful 500W motor and a variable speed system.

주요 특징:

• 모터: Powerful 500 Watt motor.
• 속도: 5 adjustable speeds ranging from 600 to 2650 revolutions per minute (rpm).
• 척: Keyed chuck with a capacity of 1.5 to 13 mm.
• 드릴링 깊이: Maximum drilling stroke of 50 mm.
• 작업대: Robust steel structure, height-adjustable, and inclinable up to 45 degrees.
• 바이스: Includes a vice with a maximum clamping capacity of 62 mm.
• 원자 램프: Integrated positioning laser for precise drilling point alignment.
• Outreach: 105 mm outreach from the column to the chuck center.

Image 2: Diagram illustrating ergonomic handle, precision laser, variable speed, and belt drive.

Image 3: Diagram illustrating adjustable drilling table, chuck capacity, heavy base, and 500W motor.

4. 조립

The Scheppach DP16VLS Pillar Drill is typically supplied partially disassembled. Follow these general steps for assembly. Refer to the detailed assembly diagrams in your product packaging for specific instructions.

1. 기초 및 기둥 조립체: Secure the main column to the stable base using the provided fasteners. Ensure all connections are tight.
2. 테이블 조립: Attach the work table to the column, ensuring it can be adjusted vertically and rotated freely.
3. Drill Head Assembly: Mount the drill head assembly onto the top of the column. Connect any necessary electrical components as per the wiring diagram.
4. 척 설치: Install the drill chuck onto the spindle. Ensure it is seated correctly and securely.
5. Handle and Vice: Attach the feed handles and the included vice to the work table.
6. 벨트 설치: If not pre-installed, install the drive belt between the motor and spindle pulleys. Adjust belt tension as needed (refer to Maintenance section).

Important: Before first use, verify all fasteners are securely tightened and all components are correctly aligned.

5. 사용 설명서

5.1 Preparing for Drilling

• 드릴 비트 선택: Choose the appropriate drill bit for the material and hole size. Insert it into the chuck and tighten securely with the chuck key.
• 속도 조정: Open the belt cover and adjust the belt position on the pulleys to select the desired speed. Higher speeds are generally for smaller bits and softer materials, while lower speeds are for larger bits and harder materials. Close the belt cover before operation.
• 작업대 조정: Loosen the table lock and adjust the work table height and angle as required for your workpiece. Re-tighten the lock securely. The table can be tilted from +45° to -45°.
• 안전한 작업물: Place the workpiece on the table and secure it firmly using the included vice or clamps. Ensure it cannot shift during drilling.
• Set Drilling Depth: Use the depth stop mechanism to set the desired drilling depth. This prevents drilling too deep.
• 레이저 활성화: Turn on the integrated laser guide to precisely align the drilling point.

Image 4: User drilling into a wooden beam, demonstrating proper workpiece securing.

Image 5: User drilling into a metal workpiece secured by the included vice.

Image 6: Close-up of the depth scale and laser guide for precise control.

5.2 드릴링 절차

1. 모든 안전 예방 조치를 따르십시오.
2. Turn on the drill using the power switch. Allow the motor to reach its operating speed.
3. Slowly lower the drill bit into the workpiece using the feed handles. Apply steady, even pressure.
4. Do not force the drill. If the motor slows significantly, reduce feed pressure.
5. Periodically retract the drill bit to clear chips, especially when drilling deep holes in metal.
6. Once the desired depth is reached, retract the drill bit completely from the workpiece.
7. Turn off the drill and wait for the chuck and drill bit to stop rotating before removing the workpiece or making adjustments.

6. 유지관리

Regular maintenance ensures the longevity and safe operation of your pillar drill.

• 청소: After each use, clean the machine of dust, chips, and debris. Use a brush or compressed air. Do not use solvents that may damage plastic parts.
• 매끄럽게 하기: Periodically lubricate moving parts such as the column, spindle, and feed mechanism with light machine oil.
• 벨트 장력: Check the drive belt tension regularly. A properly tensioned belt should have slight give when pressed. Adjust if too loose or too tight to prevent slippage or excessive wear.
• 척 유지관리: Keep the chuck jaws clean and free of debris. Lubricate the chuck mechanism occasionally.
• 전기 검사: Regularly inspect the power cord and plug for damage. If damaged, have it replaced by a qualified technician.

7. 문제 해결

This section addresses common issues you might encounter with your Scheppach DP16VLS Pillar Drill.

8. 사양

Technical data for the Scheppach DP16VLS Pillar Drill.

• 모델 번호: DP16VLS
• 제조업체: Scheppach
• 기사 코드: SCH5906810901
• 제품 크기: 43.5 x 22 x 60cm
• 품목 무게: 14kg
• 재료: 강철
• 색상: 파란색
• 마치다: 광택 처리
• 전원: 코드식 전기
• 권tage: 230볼트
• 왓tage: 500와트
• Amp나이: 16 Amp오히려
• 척 용량: 1.5~13mm
• Max Drilling Depth: 50mm (XNUMXmm)
• 속도: 5 (600-2650 rpm)
• 최대 회전 속도: 2650 분당
• 사운드 레벨: 84데시벨
• 케이블 길이: 2000mm (XNUMXmm)
• Max Distance Chuck to Table: 170mm (XNUMXmm)
• Max Distance Chuck to Base: 250mm (XNUMXmm)
• 테이블 기울기: -45° ~ +45°
• 포함된 구성 요소: Pillar Drill, Vice

Image 7: Diagram illustrating the 50 mm drilling depth capacity.

Image 8: Diagram showing suitable materials for drilling: wood, steel, metal, aluminum, plastic.

Image 9: Close-up of drill head showing 105 mm outreach from column to chuck center.

9. 보증 및 지원

For warranty information, please refer to the documentation included with your purchase or contact Scheppach customer service directly. Keep your proof of purchase for any warranty claims.

For technical support, spare parts, or service inquiries, please contact your authorized Scheppach dealer or visit the official Scheppach web연락처 정보 사이트.