1. 서론
This manual provides essential information for the installation, operation, and maintenance of the BANNER ENGINEERING S18AW3FF50 EZ-Beam S18 Series Photoelectric Sensor. This sensor is designed for reliable object detection in industrial environments, featuring a 50 mm range, 20-250VAC input, and SPST solid-state light operate output.
Figure 1: BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor with coiled cable.
2. 설정 및 설치
최적의 성능과 안전을 위해서는 올바른 설치가 매우 중요합니다. 다음 단계를 주의 깊게 따르세요.
2.1 풀기 및 검사
- Carefully remove the sensor from its packaging.
- Inspect the sensor for any visible damage that may have occurred during shipping.
- 포장 명세서에 기재된 모든 구성품이 있는지 확인하십시오.
2.2 센서 장착
The S18AW3FF50 sensor is designed for easy mounting. Ensure the mounting surface is stable and free from excessive vibration.
- Select a mounting location that provides clear line-of-sight for the sensor's detection range (50 mm).
- Secure the sensor using appropriate mounting hardware (not included). The sensor features a threaded barrel for secure attachment.
- Ensure the sensor is oriented correctly for the intended detection application.
그림 2: 측면 view of the S18AW3FF50 sensor, showing the threaded barrel and cable.
2.3 전기 연결
경고: Disconnect all power before making electrical connections to prevent electric shock or damage to the equipment.
The S18AW3FF50 operates on 20-250VAC input and provides an SPST Solid-State Light Operate output. The sensor comes with a 2M (6.5FT) cable.
| 와이어 색상 | 기능 |
|---|---|
| 갈색 | AC Line (L1) |
| 파란색 | AC Neutral (L2) |
| 검은색 | Output (SPST Light Operate) |
Connect the sensor wires to the control circuit according to the provided wiring diagram and local electrical codes. Ensure all connections are secure.
Figure 3: S18AW3FF50 sensor showing the cable with exposed wires for electrical connection.
3. 운영
Once installed and wired, the S18AW3FF50 sensor is ready for operation.
3.1 전원 켜기
Apply power to the sensor (20-250VAC). The sensor will typically have an indicator LED (if present) to show power status and output state.
3.2 Detection Principle
The S18AW3FF50 is a photoelectric sensor operating in a fixed field mode. It emits a light beam and detects objects based on the reflection or interruption of this beam. The "Light Operate" output means the output will be active when light is received by the sensor (i.e., when an object is detected or not detected, depending on the specific fixed field configuration).
3.3 범위 및 성능
The sensor has a specified detection range of 50 mm. Ensure that objects to be detected fall within this range for reliable operation. Environmental factors such as dust, moisture, and ambient light can affect performance.
4. 유지관리
The S18AW3FF50 sensor is designed for low maintenance. Regular checks can ensure long-term reliable operation.
4.1 청소
- Periodically clean the sensor lens and housing to remove dust, dirt, or debris that may accumulate and interfere with detection.
- Use a soft, lint-free cloth and a mild cleaning solution if necessary. Avoid abrasive cleaners or solvents.
4.2 케이블 및 연결 검사
- Regularly inspect the sensor cable for any signs of wear, cuts, or damage.
- Check electrical connections to ensure they remain secure and free from corrosion.
5. 문제 해결
This section provides solutions to common issues encountered with the S18AW3FF50 sensor.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 센서 전원이 켜지지 않음 | No power supply; Incorrect wiring; Damaged sensor. | Verify power supply (20-250VAC); Check wiring against Table 1; Replace sensor if damaged. |
| 센서가 물체를 감지하지 못합니다 | Object out of range (50 mm); Dirty lens; Misalignment; Ambient light interference. | Ensure object is within 50 mm range; Clean sensor lens; Realign sensor; Shield sensor from strong ambient light. |
| 간헐적 감지 | Vibration; Loose connections; Fluctuating power. | Secure sensor mounting; Check all electrical connections; Ensure stable power supply. |
6. 사양
Key technical specifications for the BANNER ENGINEERING S18AW3FF50 Photoelectric Sensor.
- 모델: S18AW3FF50
- 시리즈: EZ-Beam S18 Series
- 감지 범위: 50mm (XNUMXmm)
- 입력 Voltage: 20-250VAC
- 출력 유형: SPST Solid-State Light Operate
- 케이블 길이: 2M(6.5피트)
- 센서 유형: Photoelectric, Fixed Field
- 제조업체: BANNER ENGINEERING
- ASIN: B07RZTBRLS
- 첫 이용 가능 날짜: 3년 2021월 XNUMX일
7. 보증 및 지원
For warranty information and technical support, please contact BANNER ENGINEERING directly or refer to their official web대지.
반품 정책: The product may be subject to a return policy of 30 days for refund/replacement, as per the seller's terms.
제조업체: BANNER ENGINEERING
추가 지원을 받으려면 다음을 방문하세요. BANNER ENGINEERING official web대지.
