자스코 45852

Jasco 45852 Smart Dimmer User Manual

모델: 45852

소개

The Jasco 45852 Smart Dimmer is a Zigbee-certified plug-in device designed for wireless control of your home's plug-in lights. It allows for remote dimming and on/off functionality, integrating with various Zigbee-compatible gateways and smart home systems. This manual provides instructions for setup, operation, and maintenance of your smart dimmer.

제품 특징

Jasco 45852 Smart Dimmer with labeled outlets and button

영상: The Jasco 45852 Smart Dimmer showing its polarized wirelessly controlled outlet, grounded always-on outlet, and the manual On/Off & Program button. Its design ensures the second wall outlet remains free for use.

Diagram showing Jasco Smart Dimmers extending Zigbee range throughout a house

영상: A diagram illustrating how multiple Jasco Smart Dimmers can extend the Zigbee wireless range throughout a home, creating a mesh network for reliable control.

설정 및 설치

  1. 놓기: Plug the Jasco 45852 Smart Dimmer into a standard 120V AC wall outlet. Ensure it is placed within range of your Zigbee gateway or another Zigbee device to ensure proper network connectivity. The compact design allows it to fit behind furniture and leave the second outlet free.
  2. 장치 연결: Plug the dimmable light fixture you wish to control into the polarized smart outlet of the dimmer. The other grounded outlet provides continuous power and is not dimmable.
  3. Pairing with a Zigbee Gateway:
    • Follow the instructions provided by your specific Zigbee gateway (e.g., Amazon Echo Plus, SmartThings, Wink) to add a new device.
    • Typically, this involves putting your gateway into "discovery" or "pairing" mode.
    • Once your gateway is in pairing mode, press the manual On/Off & Program button on the Jasco Smart Dimmer. The LED indicator on the dimmer will flash to indicate pairing mode and then turn solid when successfully paired.
    • 메모: When pairing with SmartThings, it may be recognized as a "GE" device.
  4. 테스트: After successful pairing, test the dimmer by using your gateway's app or voice commands (if applicable) to turn the connected light on/off and adjust its brightness.

The Jasco 45852 Smart Dimmer is compatible with Amazon Alexa devices when connected through a certified hub, or directly with Echo Plus and Echo Show (2nd gen). It is not compatible with Philips Hue (Zigbee Light Link – ZLL).

작동 지침

수동 제어

The manual On/Off & Program button on the front of the dimmer allows for direct control of the connected light.

Remote Control via Zigbee Gateway

Once paired with your Zigbee gateway, you can control the dimmer wirelessly using your gateway's mobile application, computer interface, or voice commands (if supported by your gateway and voice assistant).

Jasco Smart Dimmer controlled by smartphone, tablet, and PC

영상: The Jasco Smart Dimmer being controlled wirelessly by various devices such as a smartphone, tablet, and PC, demonstrating its integration into a smart home ecosystem for customized scenes and scheduled events.

Energy monitoring graph showing reduced energy consumption

영상: A graphic illustrating energy monitoring capabilities, showing a graph of energy usage over time, highlighting how dimming can reduce energy consumption and save money.

유지

The Jasco 45852 Smart Dimmer requires minimal maintenance.

문제 해결

문제가능한 원인 / 해결책
Light does not turn on or dim.
  • Ensure the dimmer is securely plugged into a working outlet.
  • Verify the connected light bulb is functional and properly screwed in.
  • Check if the dimmer is properly paired with your Zigbee gateway. Re-pair if necessary.
  • Confirm the light bulb is dimmable. Non-dimmable bulbs may not function correctly or at all.
  • For low-draw LED bulbs, try setting the dimmer to a higher percentage (e.g., 70%) if the bulb doesn't turn on at 100%. Some low-wattage bulbs require a minimum load to activate.
LED lights blink or glow dimly when off.
  • This can be caused by residual voltag전자(권tage leakage) common with some LED bulbs and dimmers. Try using a different brand or type of dimmable LED bulb.
  • Ensure the dimmer is compatible with your specific LED bulb type.
Dimmer cannot pair with gateway.
  • Ensure your gateway is in pairing/discovery mode.
  • Confirm the dimmer is within range of the gateway or another Zigbee device acting as a repeater.
  • Verify your gateway is Zigbee-certified and compatible with the Jasco 45852. (Note: Not compatible with Philips Hue ZLL).
  • Try resetting the dimmer to factory settings (refer to your gateway's instructions or Jasco support for specific reset procedures if the manual button doesn't work).
리모컨이 반응하지 않습니다.
  • Check the Zigbee network status on your gateway.
  • Ensure the dimmer is still connected to the network.
  • Verify your mobile device or computer has an active internet connection if controlling remotely.
  • The wireless range is up to 150ft from the controller or closest Zigbee device. Obstacles can reduce this range.

명세서

특징세부 사항
모델 번호45852
전원120VAC, 60Hz
Maximum Load (Dimmable Outlet)300W Incandescent, 100W Dimmable LED/CFL
Maximum Load (Always-On Outlet)15 Amps, 1800W Resistive
연결 프로토콜지그비
무선 범위Up to 150 ft. from controller or closest Zigbee device
작동 온도32-104°F(0-40°C)
치수(길이 x 너비 x 높이)4 x 1.4 x 2.4인치(101.6 x 35.6 x 60.9mm)
품목 무게7.2 온스
색상하얀색
용법실내에서만 사용 가능
Jasco 45852 Smart Dimmer dimensions diagram

영상: A diagram showing the physical dimensions of the Jasco 45852 Smart Dimmer, measuring 4 inches in length, 1.4 inches in width, and 2.4 inches in height.

Jasco Smart Dimmer packaging with detailed specifications

영상: The product packaging for the Jasco Plug-In Smart Dimmer, displaying key specifications such as maximum load for incandescent and dimmable LED/CFL bulbs, amp시대, 권tage, wireless range, and operating temperature.

보증 정보

The Jasco 45852 Smart Dimmer comes with a 2년 한정 보증. For detailed terms and conditions, please refer to the warranty documentation included with your product or visit the official Jasco web대지.

고객 지원

For further assistance, technical support, or to inquire about warranty claims, please contact Jasco customer support.

관련 문서 - 45852

사전view Jasco ZW3105 플러그인 스마트 디머 사용 설명서 및 설치 가이드
Jasco ZW3105 플러그인 스마트 디머에 대한 종합 가이드로, 설치, Z-Wave 네트워크 통합, 수동 제어, 사양, 안전 경고 및 보증 정보를 다룹니다.
사전view Jasco ZWN3109 플러그인 디머 사용 설명서
Jasco ZWN3109 플러그인 디머 사용 설명서에는 Z-Wave 네트워크의 사양, 기능, 설치 및 구성에 대한 자세한 정보가 포함되어 있습니다. FCC 규정, 경고 및 기술 명령 등급 정보가 포함되어 있습니다.
사전view Z-Wave 벽면형 스마트 디머(패들) 사용 설명서
Z-Wave 매립형 스마트 디머(패들) 모델 76597/ZWN3018 사용 설명서입니다. 사양, 소개, 주요 기능, 설치 다이어그램, 버튼 기능, 장치 포함 여부, 명령 클래스 및 구성 매개변수가 포함되어 있습니다.
사전view Jasco 15119 플러그인 기계식 타이머: 사용 설명서 및 설치 가이드
Jasco 15119 플러그인 기계식 타이머의 설치 및 사용 방법에 대한 자세한 설명입니다. 켜짐/꺼짐 시간 설정 방법, 극성 플러그 이해, 안전 경고 사항을 알아보세요.
사전view Jasco Pro 시리즈 59387 Z-Wave 벽면 매립형 스마트 콘센트 사용 설명서 및 설치 가이드
Jasco Pro Series 59387 Z-Wave 매립형 스마트 콘센트(모델 ZWA1003)의 사용 설명서 및 설치 가이드입니다. 안전 경고, 배선 지침, Z-Wave 네트워크 통합, 장치 기능, 사양, Z-Wave 기능, 구성 매개변수, 보증 및 FCC/IC 규정 준수에 대한 내용을 다룹니다. 스마트 홈 자동화를 위해 설계되었습니다.
사전view Jasco Z-Wave 켜짐/꺼짐/밝기 조절 Lamp 모듈(ZW3103) 사용자 설명서
Jasco Z-Wave On/Off/Dim L 사용 설명서amp 무선 조명 제어 모듈(모델 45702, ZW3103)은 설치, 작동, 기능, 사양 및 안전 지침을 자세히 설명합니다.