MAKJUNS Electra 7 HD Wide 비만 환자용 접이식 휠체어 사용 설명서

1. 서론

This manual provides essential information for the safe and effective operation, maintenance, and care of your MAKJUNS Electra 7 HD Wide Bariatric Foldable Wheelchair. Please read this manual thoroughly before initial use and retain it for future reference. The Electra 7 HD is a portable power wheelchair designed for individuals requiring mobility assistance, featuring a 400 lbs weight capacity, 12-inch rear tires, a 21-inch wide seat, and two 250W motors.

2. 안전 정보

Always prioritize safety when operating the wheelchair. Failure to follow safety guidelines may result in injury or damage to the device.

• Ensure the wheelchair is fully unfolded and locked into position before use.
• 제공된 안전벨트를 항상 착용하십시오.
• 최대 중량 용량인 400파운드를 초과하지 마십시오.
• Avoid operating the wheelchair on excessively steep inclines or declines beyond its specified capabilities.
• Be aware of your surroundings and avoid obstacles.
• 움직이는 부품에 손과 의복을 가까이 하지 마십시오.
• Ensure batteries are properly charged and connected before operation.

3. 설치 및 조립

Your Electra 7 HD wheelchair comes largely pre-assembled. Follow these steps for initial setup:

1. 휠체어 펼치기: Gently pull the backrest upwards until the frame locks into place. Ensure all locking mechanisms are secure.
2. 조이스틱 컨트롤러 부착: The joystick controller can be mounted on either the left or right armrest. Slide the controller onto the designated bracket until it clicks securely. Connect the controller cable to the corresponding port, typically located under the armrest.
3. 배터리 연결: The wheelchair comes with two battery packs. Locate the battery compartments, usually under the seat or at the rear. Insert the batteries and ensure they are securely connected to the power cords.
4. 발판 조정: Adjust the footrest to a comfortable position for the user.
5. 전복 방지 바퀴: Ensure the anti-tip wheels are properly installed and adjusted for stability, especially when navigating inclines.

그림 3.1: 전면 view of the Electra 7 HD wheelchair, showing the joystick controller on the left armrest.

4. 사용 설명서

The Electra 7 HD is designed for intuitive operation. Familiarize yourself with the joystick controller before operating the wheelchair.

1. 전원 켜기/끄기: Press the power button on the joystick controller to turn the wheelchair on or off. The battery indicator lights will illuminate.
2. 속도 조정 : Use the speed adjustment buttons (+/-) on the joystick to select your desired speed level. Start with a low speed until comfortable.
3. 방향 제어: Gently push the joystick in the desired direction (forward, backward, left, right). The wheelchair will respond smoothly. Release the joystick to stop.
4. 선회: The wheelchair offers a great 360-degree turning circle for excellent maneuverability in tight spaces.
5. 지형 탐색: The large 12-inch rear tires and powerful 250W motors provide good traction for navigating various terrains, including slight inclines and uneven surfaces.
6. 수동 모드: To push the wheelchair manually without power, engage the manual brake and pull out the clutches on both sides of the wheelchair. This disengages the motors, allowing the chair to be pushed.

5. 접기 및 운반

The Electra 7 HD is designed for easy folding and transport.

1. Ensure the wheelchair is powered off.
2. Lift the lever at the back of the seat and gently push the backrest forward until the chair folds compactly.
3. Once folded, the wheelchair can be easily lifted and stored in a vehicle trunk or other storage space.

Figure 5.1: The wheelchair is shown folded from the side, demonstrating its compact design for storage and transport.

6. 유지관리

Regular maintenance ensures the longevity and optimal performance of your wheelchair.

• 청소: 프레임과 좌석을 광고로 닦아주세요amp 옷감. 가혹한 화학 물질을 사용하지 마십시오.
• 배터리 관리 : Charge batteries regularly, even if not in frequent use, to maintain battery health. Store batteries in a cool, dry place.
• 타이어 압력: Periodically check the tire pressure and inflate as needed (if applicable to pneumatic tires).
• 일반 검사: Regularly inspect all nuts, bolts, and connections for tightness. Check for any signs of wear or damage to the frame, wheels, or controller.

7. 문제 해결

If you encounter issues with your wheelchair, refer to the following common troubleshooting tips:

• Wheelchair not powering on: Check if the batteries are fully charged and properly connected. Ensure the power button on the joystick is pressed.
• 휠체어가 움직이지 않음: Verify that the joystick controller is securely connected. Ensure the manual brake is disengaged and the motor clutches are engaged (not in manual push mode).
• Unresponsive joystick: Check all cable connections to the joystick. If the issue persists, contact customer support.
• 비정상적인 소음: Discontinue use and inspect the wheels and motors for any obstructions or loose parts.

8. 사양

9. 보증 및 지원

This product is covered by a limited warranty. For specific details regarding your warranty coverage, please refer to the documentation included with your purchase or contact customer support.

법적 고지사항: Returned items are shipped back at the buyer's expense unless damage occurs in the original shipment or the product is defective. All USA shipped items, that have the original packaging, excluding power mobility devices, bed packages, patient & car lifts, which are not damaged are returnable with prior approval but the buyer is charged a 25% restocking fee and return shipping costs and is not reimbursed for the original shipping costs. Power Mobility Devices, including scooters and Power Chairs, will be accepted for return following an RMA request and authorization within 20 days of the order. The buyer must pay for the shipping back to the facility and incur a 25% restocking fee. This restocking fee will not apply to damaged or defective power mobility devices. The buyer must describe in detail the issue and provide pictures of the damage due to shipping. This goes for all refused shipments as well.

For customer support, please refer to the contact information provided with your product or visit the manufacturer's official web대지.