제품 끝view
The Lepro RGB LED Strip Lights are designed to provide vibrant, color-changing illumination for various indoor applications. This 16.4ft (5m) flexible strip features 150 5050 SMD LEDs, offering primary Red, Green, Blue (RGB) colors, white, and 16 multicolored options. It comes with a 44-key IR remote controller and a 24V power adapter for easy plug-and-play setup. These lights are ideal for enhancing the ambiance of living rooms, bedrooms, dining rooms, kitchens, desks, cabinets, and are particularly suitable for holiday decorations.
Image: Complete kit of Lepro RGB LED Strip Lights, showing the coiled strip, remote control, and power supply.
Key features include ultra-high brightness, a wide range of color options with DIY customization, 8 lighting modes, and adjustable brightness levels. The strip utilizes strong 3M adhesive for easy installation, complemented by extra mounting brackets/fixing clips to ensure secure placement.
이미지: 전amples of the LED strip lights installed in different home environments, such as behind a TV, under kitchen cabinets, and along a bar counter.
상자 안에 무엇이 들어있나요?
- 1x 150 SMD 5050 LEDs 16.4ft/5m non-waterproof RGB strip
- 1x 44 key IR remote controller
- 1x 2A 12V power adapter (US Plug)
- Extra mounting brackets/fixing clips
설치 가이드
LED 스트립 조명을 올바르게 설치하려면 다음 단계를 따르십시오.
- 표면 준비: Ensure the surface where you intend to install the strip lights is clean, dry, and smooth. Wipe it thoroughly to remove any dust or debris.
- 스트립을 붙이세요: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the desired surface, applying firm and even pressure along its entire length.
- 원하는 길이로 자르기 (선택 사항): If the strip is too long for your application, you can cut it at designated cutting marks (usually indicated by a copper line and a scissor icon). Do not cut at any other point, as this may damage the strip.
- 클립으로 고정: For added security, especially on textured surfaces or in areas where the adhesive might weaken over time, use the provided fixing clips. Space them evenly along the strip and secure them with small screws or appropriate fasteners.
- 전원 연결: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 12V power adapter. Plug the power adapter into a standard electrical outlet.
Image: Visual instructions demonstrating the installation process, from preparing the surface to securing the strip with clips.
Image: Detail showing the strong 3M adhesive on the back of the strip and the included fixing clips for enhanced stability.
작동 지침
Your Lepro RGB LED Strip Lights are controlled by the included 44-key IR remote. Ensure the remote is pointed directly at the IR receiver connected to the LED strip for optimal performance.
Image: The 44-key remote control, detailing its various functions for color selection, brightness adjustment, and mode changes.
원격 제어 기능:
- 전원 켜기/끄기: Use the red and green buttons at the top right to turn the lights on or off.
- 밝기 조정: The two arrow buttons (up/down) below the power buttons control the brightness (5 levels available).
- 정적 색상: Select from 20 static colors using the color grid buttons.
- DIY 색상: Use the DIY1-DIY6 buttons to create and save your custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
- 동적 모드: Choose from 8 dynamic modes (e.g., Flash, Strobe, Fade, Smooth) using the buttons on the bottom right.
- 속도 조정 : For dynamic modes, use the 'QUICK' and 'SLOW' buttons to adjust the transition speed (5 levels available).
유지 보수 및 관리
To ensure the longevity and optimal performance of your Lepro RGB LED Strip Lights, follow these maintenance guidelines:
- 청소: Gently wipe the LED strip with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
- 방수 기능: 이 제품은 방수가 안 됨. Avoid exposing the LED strip, power adapter, or remote control to water or high humidity. Install only in indoor, dry environments.
- 손질: Do not bend the LED strip sharply or apply excessive force, as this can damage the internal circuitry.
- 전원 공급 장치: Always use the original power adapter provided with the kit. Using an incompatible power supply may damage the lights or pose a safety risk.
문제 해결
If you encounter issues with your LED strip lights, refer to the following common solutions:
- 표시등이 켜지지 않음:
- Check all connections to ensure they are secure between the LED strip, IR receiver, and power adapter.
- Verify that the power adapter is properly plugged into a working electrical outlet.
- 리모컨에 배터리가 제대로 작동하는지, 그리고 적외선 수신기를 향해 똑바로 조준되어 있는지 확인하십시오.
- 중요한 팁: If the lights are not working or not displaying colors correctly, ensure the 4-pin connector from the LED strip is inserted correctly into the IR receiver. Sometimes, the pins may be inserted backward. If this is the case, try unplugging and re-inserting the connector in the opposite orientation. After re-inserting, press the 'Blue' color button, then the 'Power' button, and then the 'Fade 7' button on the remote repeatedly until the lights function correctly.
- 원격 응답 없음:
- 리모콘의 배터리를 교체하세요.
- 리모컨과 IR 수신기 사이에 장애물이 없는지 확인하세요.
- Colors Not Matching Remote:
- This can often be resolved by re-calibrating the remote. Try the 'Important Tip' mentioned above (Blue button, Power button, Fade 7 repeatedly).
제품 사양
| 사양 | 세부 사항 |
|---|---|
| 모델 번호 | 410082-RGB-US |
| 색상 | RGB(빨간색, 녹색, 파란색) |
| 상표 | 나병 |
| 실내/실외 사용 | 실내 |
| 특징 | Adjustable, Color Changing |
| 광원 유형 | 주도의 |
| 전원 | 코드식 전기 |
| 밝은 색상 | RGB |
| 재료 | 구리, 플라스틱 |
| 컨트롤러 유형 | 원격 제어 |
| 연결 기술 | 적외선 |
| 광원의 수 | 150 |
| 권tage | 12 볼트 |
| 왓tage | 24 와트 |
| 품목 무게 | 0.22킬로그램(7.7온스) |
| 제품 치수 | 5.43 x 5.51 x 2.8 인치 |
| 방수 레벨 | 방수가 되지 않음 |
| 필요한 배터리 | 1 A battery (for remote) |
보증 및 지원
Lepro products are designed for quality and reliability. For specific warranty information regarding your LED Strip Lights, please refer to the documentation included with your purchase or visit the official Lepro web대지.
For further assistance, technical support, or to explore other Lepro products, please visit the 아마존의 나병 전문 매장.
