1. 서론
Thank you for choosing the SENCOR SWS 4250 Weather Station. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read these instructions carefully before use and retain them for future reference.
2. 안전 정보
- 본체 또는 센서를 극한 온도, 직사광선 또는 습기에 노출시키지 마십시오.
- Use only the specified power adapter (DC 4.5V/150mA) for the main unit.
- Ensure correct battery polarity when inserting batteries into both the main unit and the sensor.
- Keep batteries out of reach of children. Do not mix old and new batteries or different types of batteries.
- 기기를 직접 분해하거나 수리하지 마십시오. 모든 정비는 자격을 갖춘 기술자에게 맡기십시오.
3. 패키지 내용
- SENCOR SWS 4250 Main Unit
- Wireless Outdoor Sensor (SWS TH4250)
- DC 4.5V/150mA Power Adapter
- 사용자 설명서
4. 제품 오버view
The SENCOR SWS 4250 Weather Station features a color LCD display for clear visibility of weather forecasts, indoor/outdoor temperature, humidity, time, and date. It supports up to three wireless outdoor sensors, with one included.
Image 1: SENCOR SWS 4250 Weather Station Main Unit and Wireless Sensor. The main unit features a color LCD display, while the compact outdoor sensor transmits data wirelessly.
5. 설정
5.1. 배터리 설치
- 메인 유닛: Open the battery compartment on the back. Insert 3 x 1.5V AAA batteries (not included), observing the correct polarity (+/-). Close the compartment.
- 실외 센서: Open the battery compartment. Insert 2 x 1.5V AA batteries (not included), observing the correct polarity (+/-). Close the compartment.
5.2. 메인 유닛 전원 공급
Connect the provided DC 4.5V/150mA power adapter to the main unit's power input and then plug it into a wall outlet. The display will illuminate.
5.3. Sensor Placement and Synchronization
Place the outdoor sensor in a shaded, dry location away from direct sunlight and rain, ensuring it is within 30 meters (open area) of the main unit. The main unit will automatically attempt to synchronize with the sensor. This may take a few minutes. Once connected, the outdoor temperature and humidity will appear on the display.
5.4. 장착 옵션
- 테이블탑: Use the integrated stand on the back of the main unit to place it on a flat surface.
- 벽걸이 : Use the hanging hole on the back of the main unit to mount it on a wall using a screw (not included).
6. 사용 설명서
6.1. 디스플레이 정보
The color LCD display shows the following information:
- Weather forecast icons (sunny, partly cloudy, cloudy, rain)
- 실내 온도 및 습도
- 실외 온도 및 습도
- Digital time (12/24 hour format)
- 날짜 및 요일
6.2. 시간 및 날짜 설정
The weather station automatically receives the DCF77 radio signal for accurate time and date synchronization. If the signal is not available or you prefer manual setting:
- 를 누르고 계세요 세트 button (location may vary, refer to device markings) to enter manual time/date setting mode.
- 사용하세요 위/아래 버튼을 눌러 값을 조정합니다.
- 누르다 세트 again to confirm and move to the next setting (e.g., hour, minute, year, month, day, 12/24 hour format).
6.3. 온도 단위 선택
를 누르세요 ° C / ° F button (location may vary) to switch between Celsius and Fahrenheit temperature display.
6.4. Managing Additional Sensors
The SWS 4250 supports up to three outdoor sensors. To add additional sensors (purchased separately):
- Install batteries in the new sensor.
- On the main unit, press the 채널 button to cycle through available sensor channels.
- The main unit will automatically search for and connect to new sensors on an unused channel.
7. 유지관리
7.1. 청소
본체와 센서를 부드러운 천으로 닦아주세요.amp 천을 사용하십시오. 연마성 세척제나 용제를 사용하지 마십시오. 디스플레이나 케이스가 손상될 수 있습니다.asing.
7.2. 배터리 교체
Replace batteries in both the main unit and the sensor when the low battery indicator appears on the display. Always replace all batteries in a set with new ones of the same type.
7.3. 보관
If the device will not be used for an extended period, remove all batteries to prevent leakage and store the unit in a cool, dry place.
8. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 메인 유닛에 디스플레이가 없습니다 | Batteries are dead or incorrectly inserted; power adapter not connected. | Check battery polarity and charge; ensure power adapter is securely connected. |
| 실외 온도/습도가 표시되지 않습니다 | Sensor batteries dead; sensor out of range; interference; sensor not synchronized. | Replace sensor batteries; move sensor closer to main unit; resynchronize sensor (remove and reinsert batteries in sensor, then main unit). |
| 시간/날짜가 잘못되었습니다 | DCF77 signal weak or unavailable; manual settings incorrect. | Move main unit to a location with better signal reception; set time/date manually. |
| 날씨 예보가 정확하지 않습니다 | The forecast is based on atmospheric pressure changes and may not always match local conditions perfectly. | 이는 정상적인 현상입니다. 예측은 추정일 뿐입니다. |
9. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 | SWS 4250 |
| 상표 | 시너 |
| 디스플레이 유형 | 컬러 LCD |
| 실내 온도 범위 | 0 °C ~ +50 °C |
| 실외 온도 범위 | -20 °C ~ +60 °C |
| 습도 범위(실내/실외) | 습도 20% ~ 90% |
| 시간 형식 | 12시간/24시간 선택 가능 |
| 시간 동기화 | DCF77 Radio Controlled (Manual setting possible) |
| Wireless Sensor Support | Up to 3 sensors (1 SWS TH4250 included) |
| 센서 전송 주파수 | 433MHz |
| 센서 전송 범위 | 최대 30m(개방 공간) |
| 메인 유닛 전원 | 3 x 1.5V AAA batteries (not included) or DC 4.5V/150mA adapter (included) |
| 센서 전력 | 2V AA 배터리 1.5개(포함되지 않음) |
| 본체 치수(폭 x 높이 x 깊이) | 173 x 125 x 22mm |
| 본체 중량 | 238g |
| 색상 | 검은색 |
10. 보증 및 지원
For warranty information and technical support, please refer to the documentation provided with your purchase or contact SENCOR customer service. Keep your proof of purchase for any warranty claims.