Caso Design HW.500

Caso Design HW.500 Touch Turbo Hot Water Dispenser

사용 설명서

Model: HW.500 | Brand: Caso Design

소개

The Caso Design HW.500 Touch Turbo Hot Water Dispenser is engineered for efficiency and convenience, providing hot water to your desired temperature in seconds. This manual provides essential information for the safe and effective use of your appliance.

주요 특징:

  • Heats water to a boil (212°F) in approximately 8 seconds.
  • Equipped with a powerful 1800-watt heating element.
  • Intuitive sensor-touch control panel for ease of use.
  • Offers 6 adjustable temperatures for various beverages.
  • Features 4 adjustable cup sizes to accommodate different needs.
Caso Design HW.500 Hot Water Dispenser, angled view

그림 1: 각도 view of the Caso Design HW.500 Hot Water Dispenser.

설정

  1. 짐 풀기: Carefully remove all packaging materials and inspect the dispenser for any damage. Retain packaging for future transport if needed.
  2. 놓기: Place the appliance on a stable, flat, heat-resistant surface, away from direct sunlight and heat sources. Ensure adequate ventilation around the unit.
  3. 초기 청소: Before first use, clean the water tank and drip tray with warm, soapy water. Rinse thoroughly and dry. Wipe the exterior of the unit with a damp 옷감.
  4. 물 탱크 설치: Fill the removable water tank with fresh, cold tap water up to the MAX line. Ensure the water filter is correctly inserted into the tank. Place the filled water tank securely onto the base of the dispenser.
  5. 전원 연결: Plug the power cord into a grounded electrical outlet. The display will illuminate, indicating the unit is ready for use.
  6. 첫 번째 사용 주기: It is recommended to run at least two full cycles of hot water (at the highest temperature setting) without consuming the water to flush out any manufacturing residues.
Caso Design HW.500 Hot Water Dispenser with water tank visible

그림 2: 측면 view showing the transparent water tank with water level markings.

작동 지침

  1. 전원 켜기: Ensure the dispenser is plugged in and the water tank is filled. The digital display will show the current status.
  2. 온도 선택: Use the temperature selection buttons on the sensor-touch control panel to choose your desired water temperature. Available temperatures typically range from 100°F to 212°F (boiling).
  3. Select Cup Size (if applicable): If your model supports adjustable cup sizes, use the corresponding buttons to select the volume of water to dispense.
  4. 물을 내어주세요: Place a cup or container on the drip tray. Press the dispense button. The unit will rapidly heat and dispense the selected amount of water at the chosen temperature.
  5. 배포 중단: To stop dispensing water before the selected volume is reached, press the dispense button again.
  6. 안전 잠금 장치: Some models include a safety lock feature. Refer to the display icons for activation and deactivation to prevent accidental dispensing.
Close-up of the Caso Design HW.500 control panel with digital display and touch buttons

그림 3: 상세 view of the sensor-touch control panel for temperature and dispense settings.

유지

청소

  • 외부: 부드러운 천으로 외부를 닦아주세요.amp 천으로 닦아주세요. 연마성 세제를 사용하거나 기기를 물에 담그지 마세요.
  • 드립 트레이: Regularly empty and clean the drip tray. It is removable for easy cleaning.
  • 수조: Clean the water tank periodically with warm, soapy water. Rinse thoroughly to remove all soap residue.
Removable drip tray of the Caso Design HW.500 Hot Water Dispenser

Figure 4: The removable drip tray for easy cleaning and maintenance.

스케일 제거

Mineral deposits (limescale) can build up over time, affecting performance. Descale your dispenser regularly, especially in areas with hard water.

  • Use a commercial descaling solution suitable for hot water dispensers, following the manufacturer's instructions.
  • 또는 흰 식초와 물을 1:1 비율로 섞은 용액을 사용할 수도 있습니다.
  • Run the descaling solution through the unit, then rinse by running several cycles of fresh water.

필터 교체

The water filter should be replaced according to the manufacturer's recommendations or if you notice a decrease in water quality or flow rate. Refer to the filter packaging for specific instructions.

문제 해결

문제가능한 원인해결책
물이 나오지 않습니다.물탱크가 비어 있거나 제대로 장착되지 않았습니다.Fill water tank or ensure it is correctly installed.
물이 충분히 뜨겁지 않습니다.온도 설정이 잘못되었습니다. 석회질이 쌓였습니다.Adjust temperature setting. Descale the unit.
느린 물 흐름.Limescale buildup. Clogged filter.Descale the unit. Replace the water filter.
장치의 전원이 켜지지 않습니다.Not plugged in. Power outage.Check power connection. Verify power supply.

명세서

특징세부 사항
상표카소 디자인
모델 번호HW.500
제품 크기(D x W x H)10.7인치 x 6.6인치 x 12.05인치
용량Approximately 4.6 Pounds (equivalent to 2.1 Liters)
색상검은색
재료플라스틱
왓tage1800 와트
권tage120 볼트
휴먼 인터페이스 입력터치스크린
필터 유형재사용 가능
포함된 구성 요소Hot water dispenser, 1 water filter, manual, warranty
Dimensions of the Caso Design HW.500 Hot Water Dispenser

Figure 5: Product dimensions for placement and space planning.

보증 및 지원

This Caso Design HW.500 Hot Water Dispenser comes with a 12 개월 한정 보증 구매일로부터. 보증 청구를 위해 구매 증빙을 보관하세요.

For technical support, service, or to inquire about replacement parts, please contact Caso Design customer service. You can find contact information and additional resources on the official Caso Design web사이트나 소매업체를 통해 구매하세요.

방문하세요 카소 디자인 스토어 자세한 내용은.