1. 서론
The E70-433T14S is a wireless transceiver module designed for reliable data communication. It operates within the 425~450.5MHz frequency band, with a default setting of 433MHz. This module integrates the CC1310 chip from Texas Instruments, providing robust performance. It features TTL level output and a 3.3V IO port voltage, utilizing a 24MHz industrial high-precision low-temperature drift crystal for stability. The module includes a Forward Error Correction (FEC) algorithm to enhance data reliability and transmission range by proactively correcting interfered data packets.
The E70-433T14S comes with a built-in low-power multifunctional wireless serial program, allowing users to perform secondary development as needed. This manual provides essential information for setup, operation, and maintenance.
2. 주요 특징
- 통신 거리: Tested up to 1.5 km under optimal conditions.
- 전송 전력: Maximum 25mW, with software-adjustable multi-level power settings.
- 주파수 대역: 글로벌 라이선스 없는 ISM 433MHz 대역을 지원합니다.
- 무선 데이터 전송률: Configurable from 2.5kbps to 168kbps.
- 낮은 전력 소모: Designed for battery-supplied applications, with receiving current significantly lower than similar products, supporting ultra-low power consumption in air wake mode.
- 데이터 전송: Capable of achieving up to 115200bps continuous frame unlimited-packet length transmission.
- 전원 공급 장치: Supports 2.2V to 3.8V. A power supply over 3.3V is recommended for optimal performance.
- 산업용 디자인: -40°C에서 85°C까지의 온도 범위에서 안정적으로 작동합니다.
- 안테나 인터페이스: Features an IPEX access point; stamp hole option is available for secondary development and integration.
- 오류 수정: Incorporates FEC (Forward Error Correction) algorithm for improved data reliability.
3. 응용 프로그램
The E70-433T14S module is suitable for a wide range of applications requiring wireless data transmission, including:
- 홈 보안 알람 시스템 및 원격 키리스 엔트리.
- 스마트 홈 및 산업용 센서 네트워크.
- 무선 알람 보안 시스템.
- 빌딩 자동화 솔루션.
- 무선 산업용 원격 제어 시스템.
- Health care products requiring wireless connectivity.
- 고급 미터 판독 아키텍처(AMI).
- Smart agriculture and smart oil field monitoring.
- Environmental monitoring, including temperature and humidity sensors.
4. 모듈 오버view
The E70-433T14S module is a compact surface-mount device (SMD) designed for easy integration into various electronic systems. Below are images illustrating the module's physical characteristics and pinout.
그림 1: 앞쪽 view of the EBYTE E70-433T14S wireless module, showing the model number, EBYTE logo, RoHS and CE certifications, serial number, manufacturer, and FCC ID.
그림 2: 각진 view of the EBYTE E70-433T14S wireless module, highlighting its compact form factor and pin headers.
그림 3: Another angled perspective of the EBYTE E70-433T14S module, providing a clear view of the antenna connector.
그림 4: 맨 아래 view of the EBYTE E70-433T14S module, illustrating the pinout diagram for various General Purpose Input/Output (GPIO) pins, power, and ground connections.
5. 기술 사양
| 매개변수 | 값 |
|---|---|
| 아이씨: | CC1310 |
| 빈도: | 431~446.5MHz (기본값: 433MHz) |
| 전송 전력: | 14dBm (25mW), software adjustable |
| 통신 거리: | Up to 1.0 km (typical), 1.5 km (maximum tested) |
| 인터페이스: | UART/IO |
| IO Port Voltage: | 3.3V (TTL level) |
| 전원 공급 장치tage: | 2.2V~3.8V (3.3V+ recommended for optimal performance) |
| Crystal Vibration: | 24MHz industrial high-precision low-temperature drift |
| 작동 온도: | -40도 ~ 85도 |
| 무선 데이터 전송률: | 2.5kbps ~ 168kbps |
| 오류 수정: | FEC (Forward Error Correction) algorithm |
| 안테나: | IPEX 접속점, stamp hole optional |
6. 설정 및 설치
6.1 전원 공급 장치 연결
Connect the module to a stable power supply within the 2.2V to 3.8V range. For optimal performance and stability, a power supply of 3.3V or higher is recommended. Ensure correct polarity (VCC and GND pins) to prevent damage to the module.
6.2 안테나 연결
Attach a suitable 433MHz antenna to the IPEX connector on the module. For best range and signal integrity, ensure the antenna is correctly matched and positioned away from metallic obstructions. If using the stamp hole option, ensure proper soldering for antenna connection.
6.3 UART/IO Interface Connection
Connect the module's UART (Universal Asynchronous Receiver/Transmitter) pins (TXD, RXD) to your host microcontroller or system. The IO port voltage is 3.3V. Ensure proper level shifting if your host system operates at a different voltage (e.g., 5V) to avoid damaging the module.
6.4 소프트웨어 구성
The module comes with a pre-programmed low-power multifunctional wireless serial program. Users can configure parameters such as frequency, transmission power, and air data rate via serial commands. For advanced functionalities or custom applications, secondary development using the CC1310's capabilities is supported.
7. 사용 설명서
7.1 데이터 전송 및 수신
Once properly configured, the module can transmit and receive data wirelessly. Data sent to the module's UART TXD pin will be transmitted over the air, and data received wirelessly will be output via the UART RXD pin. Ensure that both transmitting and receiving modules are configured with compatible parameters (frequency, air data rate, etc.).
7.2 순방향 오류 정정(FEC)
The integrated FEC algorithm automatically adds redundant data to transmissions, allowing the receiver to detect and correct certain errors that may occur due to interference or signal degradation. This feature improves the reliability and effective range of communication, especially in noisy environments. No direct user intervention is typically required for FEC operation.
7.3 Low Power Operation
The E70-433T14S is designed for low power consumption, making it suitable for battery-powered devices. Utilize the module's low-power modes and air wake functionality to minimize energy usage in applications where continuous operation is not required. Refer to the detailed CC1310 datasheet and EBYTE's programming guide for specific low-power mode configurations.
8. 유지관리
- 손질: Handle the module with care to avoid physical damage. Electrostatic discharge (ESD) precautions should be observed during handling and installation.
- 환경: Operate the module within its specified temperature range (-40°C to 85°C) and avoid exposure to excessive moisture or corrosive environments.
- 청소: 필요한 경우 마른 부드러운 천으로 모듈을 살살 닦아주십시오. 액체 세척제나 용제를 사용하지 마십시오.
- 안테나: Ensure the antenna connection remains secure and the antenna itself is undamaged for optimal performance.
9. 문제 해결
- 전원 없음: 전원 공급 장치의 볼륨을 확인하십시오.tage is within the 2.2V-3.8V range and correctly connected to the VCC and GND pins. Check for any short circuits.
- 통신 없음:
- Ensure UART connections (TXD, RXD) are correct and not swapped.
- Verify that the host microcontroller's UART settings (baud rate, parity, stop bits) match the module's configuration.
- Check if both transmitting and receiving modules are operating on the same frequency and air data rate.
- 범위/신호 불량:
- 안테나가 제대로 연결되어 있고 손상되지 않았는지 확인하십시오.
- Check for obstructions (especially metallic) between the transmitting and receiving modules.
- Verify that the transmission power is set to an appropriate level (maximum 25mW).
- Environmental interference can affect range; consider testing in different locations.
- 모듈 과열: Ensure adequate ventilation, especially if operating at maximum transmission power for extended periods. Verify power supply voltage is not exceeding the maximum limit.
10. 준수 정보
The E70-433T14S module is designed to comply with relevant industry standards. As indicated on the module, it is 로이스 compliant and carries the CE mark, signifying conformity with European health, safety, and environmental protection standards. The module also has an FCC ID: 2ALPH-E70, indicating compliance with Federal Communications Commission regulations for radio frequency devices.
11. 지원
For further technical support, detailed datasheets, programming guides, or inquiries, please visit the official EBYTE web대지: www.cdebyte.com
