1. 서론
This manual provides detailed instructions for the installation, operation, and maintenance of the BFT Phobos BT A40 automatic double swing gate operator. Please read this manual thoroughly before installation and use to ensure proper function and safety.
그림 1: 이상view of the BFT Phobos BT A40 Kit Components.
2. 안전 정보
부상이나 장비 손상을 방지하려면 항상 다음 안전 예방 조치를 준수하세요.
- 설치는 현지 규정에 따라 자격을 갖춘 담당자가 수행해야 합니다.
- Disconnect power before performing any maintenance or installation work.
- 작동 중에는 어린이와 애완동물이 게이트 구역에 접근하지 못하도록 하세요.
- 부품이 손상되었거나 제대로 작동하지 않는 경우 게이트를 작동하지 마십시오.
- Ensure all safety devices (photocells, emergency stop) are correctly installed and functioning.
- In case of power failure, use the provided emergency release keys to manually open the gate.
3. 포함된 구성품
The BFT Phobos BT A40 kit typically includes the following components:
- 2 x BFT PHOBOS BT A40 electromechanical actuators with fixings.
- 1 x BFT THALIA LIGHT control panel with integrated radio receiver (memory for 63 manual transmitters).
- 1 x Control panel housing (hermetic).
- 3 x BFT MITTO B4 4-channel remote controls.
- 1 x BFT Radius LED BT A R1 flashing lamp 안테나 포함.
- 1 x Pair of BFT Compacta A20-180 pivoting photocells (transmitter and receiver).
- 4 x Keys for emergency gate opening in case of power failure.
- Mounting brackets for posts and gate leaves.
- Various small parts and accessories for installation (e.g., nuts, bolts, seals).
Figure 2: Small Parts and Accessories.
4. 설정 및 설치
This section outlines the general steps for installing the BFT Phobos BT A40 system. Professional installation is highly recommended.
4.1 액추에이터 설치
Install the two BFT PHOBOS BT A40 electromechanical actuators on each gate leaf. Ensure the mounting brackets are securely fastened to both the gate post and the gate leaf. The maximum distance between the edge of the post and the hinge axis should be up to 8 cm.
Figure 3: BFT PHOBOS BT A40 Actuators and THALIA LIGHT Control Unit.
Figure 4: Mounting Brackets.
The magnetic limit switch system ensures maximum operating precision and very easy and quick adjustment. The integrated adjustable limit switch means there is no need to use bumpers screwed to the ground.
4.2 제어판 설치
Mount the BFT THALIA LIGHT control panel in its hermetic housing in a protected location, typically near the gate. Connect the actuators, power supply, and all safety devices to the control panel according to the wiring diagram provided in the full installation manual (not included in this summary).
4.3 Photocell Installation
Install the BFT Compacta A20-180 pivoting photocells on opposite sides of the gate opening, ensuring they are aligned. These photocells provide a safety barrier, preventing the gate from closing if an obstruction is detected.
Figure 5: BFT Compacta A20-180 Pivoting Photocell Pair.
4.4 Flashing Lamp 설치
Mount the BFT Radius LED BT A R1 flashing lamp in a visible location. This lamp provides a visual warning when the gate is in motion.
Figure 6: BFT Radius LED BT A R1 Flashing Lamp.
5. 사용 설명서
The BFT Phobos BT A40 system is designed for automatic operation of double swing gates.
5.1 원격 제어 작동
Use the BFT MITTO B4 4-channel remote controls to operate the gate. Each button can be programmed for different functions (e.g., open/close both leaves, open/close single leaf, pedestrian access). Refer to the control panel manual for remote control programming instructions.
Figure 7: BFT MITTO B4 Remote Controls.
5.2 자동 작동
Once activated, the gate will open or close automatically. The D-TRACK technology ensures complete application safety by optimally selecting the necessary forces at each point of the automation's operation. The system will detect obstructions via the photocells and reverse or stop to prevent damage or injury.
5.3 비상 수동 해제
In the event of a power failure, use the provided emergency keys to manually unlock and open the gate. Insert the key into the actuator's release mechanism and turn it as indicated in the actuator's specific manual.
6. 유지관리
Regular maintenance ensures the longevity and reliable operation of your BFT gate operator.
- 월간 간행물: Check the gate's movement for any unusual noises or resistance. Ensure the photocells are clean and unobstructed. Test the safety features.
- 계간지: Inspect all mounting points and fasteners for tightness. Check the condition of the actuator's screw nut; the modernized design (deeper screw nut) reduces the possibility of accidental contamination of the mechanism, but regular inspection is still advised.
- 매년: 자격을 갖춘 기술자에게 시스템 점검을 받으십시오.
- Keep the area around the gate clear of debris and vegetation.
7. 문제 해결
이 섹션에서는 발생할 수 있는 일반적인 문제에 대해 설명합니다. 복잡한 문제의 경우 자격을 갖춘 기술자에게 문의하십시오.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 게이트가 리모컨에 반응하지 않습니다. | Dead remote battery, remote out of range, power failure, remote not programmed. | Replace battery, move closer to gate, check power supply, reprogram remote. |
| Gate stops or reverses during closing. | Obstruction detected by photocells, D-TRACK system detecting unusual resistance. | Clear obstruction from photocell path, clean photocells, check gate for physical obstructions or binding. |
| 깜박임 lamp 작동하지 않습니다. | Lamp bulb faulty, wiring issue. | Check connections, replace lamp 필요한 경우. |
| 문이 느리게 또는 제대로 작동하지 않습니다. | 낮은 볼륨tage, mechanical friction, actuator issue. | Check power supply, lubricate gate hinges, contact technician. |
8. 사양
Key technical specifications for the BFT Phobos BT A40 system:
- 모델: Phobos BT A40
- 제조업체: 비피에이치피(BFT)
- 액추에이터 유형 : 24V Electromechanical irreversible drive
- 최대 게이트 잎 길이: Up to 4 meters (13.1 ft) per leaf
- 최대 게이트 잎 하중: Up to 250 kg (551 lbs) per leaf
- 제품 크기(길이 x 너비 x 높이): 26 x 18 x 14cm(10.2 x 7.1 x 5.5인치)
- 제품 무게: 2.21kg(4.87파운드)
- 색상: 은
- 참조 번호: OGBBFTADB0037
- 제품 모델 번호: 2611950
Figure 8: Actuator Dimensions (Phobos BT A40 relevant).
9. 보증 및 지원
Information regarding product warranty and availability of spare parts is not explicitly provided in this manual. Please refer to your purchase documentation or contact your BFT dealer for details on warranty coverage and spare parts availability.
