스틸메이트 SBS-1 사각지대 감지 시스템 사용자 설명서

1. 제품 오버view

The STEELMATE SBS-1 is a microwave-based blind spot detection system designed to enhance driving safety. It identifies vehicles in the blind spot areas on both sides of your vehicle, which are not visible through standard rearview or side mirrors. When a vehicle enters the detection zone during overtaking or lane changes, the system provides an audible and visual alert to the driver.

Image: Main components of the STEELMATE SBS-1 system, including the ECU, sensors, and wiring, neatly arranged in protective foam packaging.

2. 안전 정보 및 법적 고지

This product is intended to provide warnings to drivers regarding approaching vehicles in adjacent lanes within the blind spot zone. It is not designed to completely replace the driver's judgment. Drivers must adhere to local traffic regulations and maintain good driving habits. STEELMATE does not guarantee or assume liability for any accidents.

Always exercise caution and perform visual checks before changing lanes or making maneuvers.

3. 패키지 내용

패키지에 다음 구성 요소가 모두 포함되어 있는지 확인하세요.

• ECU (Electronic Control Unit) x 1
• 79GHz Microwave Sensors x 2
• Main Wiring Harness x 1
• Display Wiring x 1
• 자석 x 2
• Alcohol Pads x 2
• 사용 설명서 x 1

Image: The various wiring harnesses and the user manual included with the STEELMATE SBS-1 system.

4. 사양

5. 설정 및 설치

The STEELMATE SBS-1 system is designed for straightforward installation. It features a patented display for the A-pillar that does not require stickers or glue, and its ON/OFF function is optional. The radar sensors are designed to be mounted behind the bumper without drilling holes.

5.1 센서 배치

The 79GHz microwave radar sensors should be installed behind the rear bumper. Ensure the sensors are positioned correctly to achieve the optimal 120° Field of View (FOV) for blind spot detection. No drilling is required; the sensors can be adhered to the bumper's inner surface.

Image: Illustration showing the recommended placement of the radar sensor behind the vehicle's bumper for optimal blind spot coverage.

5.2 ECU and Wiring Connection

Connect the sensors, display, and vehicle power supply to the ECU using the provided main and display wiring harnesses. Ensure all connections are secure and properly insulated. The ECU operates on DC 9-30V, making it compatible with both 12V and 24V vehicle electrical systems.

Image: The Electronic Control Unit (ECU) for the STEELMATE SBS-1 system, which processes sensor data and controls alerts.

5.3 디스플레이 설치

The visual alert display can be inserted anywhere between the A-pillar and the dashboard. It provides visual warnings and can be optionally turned ON or OFF. The display is designed to be discreet and integrate seamlessly into the vehicle's interior.

Image: The compact visual display unit integrated into the A-pillar of a vehicle, showing a warning light for blind spot detection.

6. 사용 설명서

Once installed and powered, the STEELMATE SBS-1 system continuously monitors your vehicle's blind spots using its 79GHz microwave radar sensors. The system activates when your vehicle's speed is within the relative speed range of >5 km/h (3.1 mph) and <40 km/h (24.9 mph) relative to other vehicles.

6.1 Detection Principle

The sensors detect objects within a range of at least 5 meters (16.4 ft) and a 120° field of view. When another vehicle enters this detection zone, the system processes the information through the ECU.

Image: A top-down diagram showing the 120-degree field of view and the detection range (250cm side, 300cm rear) of the blind spot sensors around a vehicle.

6.2 경보 시스템

Upon detecting a vehicle in the blind spot, the system provides both visual and audible alerts:

• 시각적 경고: The A-pillar display will illuminate or flash, indicating a detected object.
• 가청 경고 : A buzzer will sound at a frequency of 1KHz±0.1KHz, providing an auditory warning.

These alerts are designed to draw the driver's attention to potential hazards during lane changes or overtaking maneuvers.

Image: A visual representation of the blind spot detection system in operation, showing a vehicle in the detection zone triggering an alert.

7. 유지관리

To ensure optimal performance and longevity of your STEELMATE SBS-1 system, consider the following maintenance guidelines:

• 센서 청소: Periodically inspect the areas where the sensors are installed (behind the bumper) and ensure they are free from excessive dirt, mud, snow, or ice. While the sensors are IP67 rated for dust and water resistance, heavy accumulation can obstruct their operation.
• 배선 검사: Occasionally check the wiring harnesses for any signs of wear, damage, or loose connections.
• 시스템 점검: If you notice any unusual behavior or a lack of alerts when expected, perform a basic system check by driving in conditions where the system should activate.

8. 문제 해결

If you encounter issues with your STEELMATE SBS-1 system, consider the following common troubleshooting steps:

• 알림 없음:
  • Ensure the system is powered on and all connections are secure.
  • Verify that the display's optional ON/OFF function is set to ON.
  • Check if sensors are obstructed by dirt or debris.
  • Confirm that the relative speed conditions for activation are met (>5km/h and <40km/h).
• 잘못된 경고:
  • Ensure sensors are correctly installed and not pointing at parts of your own vehicle or fixed objects.
  • Check for any loose wiring that might cause intermittent signals.
• 간헐적 작동:
  • Inspect all wiring for damage or corrosion.
  • Ensure stable power supply to the ECU.

For persistent issues, please contact STEELMATE customer support for further assistance.

9. 보증 및 지원

For information regarding product warranty, returns, or technical support, please refer to the official STEELMATE website or contact their customer service department directly. Keep your purchase receipt and product model number (SBS-1) readily available when seeking support.

제조업체: 스틸메이트

제조업체 부품 번호: ITB BSD