La Crosse Technology 513-1417CH-INT Digital Wall/Table Clock Instruction Manual

소개

This manual provides detailed instructions for the setup, operation, and maintenance of your La Crosse Technology 513-1417CH Digital Wall/Table Clock. This atomic clock features a large, easy-to-read display showing time, day of week, date, indoor/outdoor temperatures, and moon phase. It includes a wireless outdoor temperature sensor for accurate external readings and can be mounted on a wall or placed on a table using its built-in stand.

패키지 내용

• 1 x Digital Wall/Table Clock (Model: 513-1417CH-INT)
• 1 x Wireless Outdoor Temperature Sensor (Model: TX141-BV3)
• 1 x 사용 설명서

설정

1. 배터리 설치

The clock and the outdoor sensor each require 2 AA batteries (not included). For optimal performance and longevity, especially in outdoor conditions, it is recommended to use Energizer Ultimate Lithium batteries.

1. Open the battery compartment on the wireless outdoor temperature sensor.
2. Insert 2 fresh AA batteries, observing the correct polarity (+/-).
3. Close the battery compartment. The sensor's LED indicator will flash once.
4. Open the battery compartment on the main clock unit.
5. Insert 2 fresh AA batteries, observing the correct polarity (+/-).
6. Close the battery compartment. The clock will power on and begin searching for the outdoor sensor signal and the WWVB atomic time signal.

2. 실외 센서 배치

Place the wireless outdoor sensor in a shaded, dry location to ensure accurate temperature readings and to protect it from direct sunlight and rain. An ideal location is under an eave or a covered porch. The sensor has a transmission range of up to 300 feet (100 meters).

Image: La Crosse Technology Digital Clock with its remote outdoor temperature sensor. The sensor is shown next to the clock, indicating its wireless connection.

3. Initial Time and Date Settings

The clock is designed to automatically set the time and date via the WWVB atomic time signal. However, you can manually configure settings if needed.

1. 잡아라 세트 button (located on the top edge of the clock) for 3 seconds to enter the settings menu.
2. 사용하세요 + or - 버튼을 눌러 값을 조정합니다.
3. 를 누르세요 세트 버튼을 눌러 조정을 확인하고 다음 항목으로 이동합니다.
4. The settings menu order is: Language (English/Spanish) > Beep ON/OFF > Atomic ON/OFF > DST ON/OFF (Daylight Saving Time) > Time Zone (PST, MST, CST, EST) > Hour > Minute > Year > Month > Date > Temperature Unit (Fahrenheit/Celsius).
5. Once all settings are confirmed, the clock will return to normal display.

이미지: 후면 view of the La Crosse Technology Digital Clock, highlighting the battery compartment and printed instructions for setting time, date, atomic time search, and sensor search.

4. WWVB Atomic Time Signal

The clock automatically searches for the WWVB atomic time signal from Fort Collins, Colorado. This ensures accurate timekeeping. The signal icon on the display indicates reception status. If the signal is weak, try repositioning the clock. You can manually initiate a search by pressing the 세트 button to search for the WWVB atomic time signal.

작동 지침

1. 디스플레이 정보

대형 LCD 디스플레이에 다음 내용이 표시됩니다.

• 시간: Large 2.13-inch tall digits.
• Day of Week & Date: Automatically updated.
• 실내 온도: 현재 실내 온도.
• 야외 온도: 무선 센서에서 측정된 현재 온도입니다.
• 문 페이즈: 현재 달의 위상을 표시합니다.

이미지: 앞면 view of the La Crosse Technology Digital Clock, showing the large digital display with time, date, indoor temperature, outdoor temperature, and moon phase.

2. 알람 기능

The clock includes an alarm function. To set or activate the alarm:

1. 를 누르세요 경보 button (top edge) to view 알람 시간.
2. 잡아라 경보 버튼을 3초 동안 눌러 알람 설정 모드로 들어갑니다.
3. 사용하세요 + or - 알람 시간과 분을 조정하는 버튼.
4. 누르다 경보 각 설정을 확인합니다.
5. 알람을 활성화/비활성화하려면 다음을 누르세요. 경보 버튼을 한 번 누르세요. 디스플레이에 알람 아이콘이 나타나거나 사라집니다.
6. 다시 알림을 받으려면 버튼을 누르세요. 선잠 알람이 울리면 버튼을 누르세요.

3. 최고/최저 기온 기록

The clock records the highest and lowest indoor and outdoor temperatures. To view 이 기록들:

• 를 누르세요 + 버튼을 view the highest recorded temperatures (HI TEMP).
• 를 누르세요 + 버튼을 다시 누르세요 view the lowest recorded temperatures (LO TEMP).
• 기록은 매일 자정에 자동으로 초기화됩니다.

유지

1. 배터리 교체

Replace batteries in both the main unit and the outdoor sensor when the low battery indicator appears on the display. Always replace both batteries in the sensor and clock simultaneously to ensure proper synchronization.

2. 청소

부드러운 d를 사용하세요amp cloth to clean the clock and sensor. Avoid abrasive cleaners or chemicals that may damage the display or casing.

문제 해결

• 실외 온도 측정 없음: Ensure the outdoor sensor batteries are fresh and correctly installed. Press and hold the - button on the main unit to initiate a sensor search. Move the sensor closer to the main unit to improve signal strength.
• 잘못된 시간: Verify that the correct time zone and DST settings are selected. Ensure the clock is receiving the WWVB atomic time signal (check the signal icon). If the signal is weak, try repositioning the clock away from electronic interference.
• Display Fading: 본체의 배터리를 교체하십시오.

명세서

Image: The La Crosse Technology Digital Clock with its dimensions labeled as 12.8 inches wide, 6.61 inches high, and 1.14 inches deep.

보증 정보

이 La Crosse Technology 제품에는 다음이 포함됩니다. 1년 한정 보증 covering parts and labor from the date of purchase. For full warranty details and claims, please refer to the official La Crosse Technology support web사이트를 방문하거나 고객 서비스에 문의하세요.

지원하다

For additional support, troubleshooting tips, FAQs, and product registration, please visit the official La Crosse Technology support web대지:

www.lacrossetechnology.com/support

제품 비디오