소개
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Bingfu Vehicle Ham Mobile Radio Antenna. This antenna is designed for vehicle-mounted applications, supporting VHF (136-174MHz) and UHF (400-470MHz) frequency ranges, making it suitable for various amateur and two-way radio systems.
The package includes the antenna, a 5-meter (16.5 feet) RG58 coaxial cable, and a lip mount fixed bracket with necessary tools for installation.
이미지: 이상view of the Bingfu Vehicle Ham Mobile Radio Antenna components, showing the antenna unit, coaxial cable, and the lip mount bracket with included tools.
설정 및 설치
Proper installation is crucial for optimal performance and longevity of your antenna. The antenna utilizes a lip mount fixed bracket, designed for secure attachment to vehicle surfaces without drilling.
패키지 내용:
- 1 x 안테나 장치
- 1 x RG58 Coaxial Cable (5m / 16.5 feet) with PL259 Male Connectors
- 1 x Lip Mount Fixed Bracket
- 1 x Hexagon Wrench (for bracket adjustment)
- 1 x Silicon Rubber Gasket
- 1 x Aluminium Gasket
설치 단계:
- 장착 위치 선택: Select a suitable location on your vehicle, such as a trunk lid, hood edge, or hatchback lip. Ensure the location allows the antenna to be clear of obstructions and provides a stable mounting surface.
- 브래킷을 조립하세요: The lip mount bracket consists of several parts. Refer to the mounting instruction image for assembly. The UHF SO239 female connector on the bracket will receive the antenna.
- Protect Vehicle Surface: cl 전에amping the bracket, place either the silicon rubber gasket or the aluminium gasket between the bracket and your vehicle's paintwork. This helps protect the vehicle surface from scratches and provides a more secure grip.
- 브래킷을 고정합니다: Use the provided hexagon wrench to tighten the screws on the lip mount bracket, securing it firmly to the chosen vehicle surface. Ensure it is tight enough to prevent movement but do not overtighten to avoid damage.
- 안테나 부착: Screw the antenna unit onto the UHF SO239 female connector on the mounted bracket. Hand-tighten until snug.
- 동축 케이블 연결: Connect one end of the RG58 coaxial cable (PL259 male connector) to the corresponding PL259 male connector on the antenna bracket. Route the cable neatly and securely into the vehicle, avoiding sharp bends or areas where it could be pinched or damaged.
- 라디오에 연결: Connect the other end of the RG58 coaxial cable to your mobile radio's antenna input.
Image: Step-by-step diagram illustrating how to assemble the lip mount bracket and attach the antenna base.
Image: Illustration demonstrating the use of silicon rubber and aluminium gaskets to protect the vehicle's surface when installing the antenna bracket.
Image: The Bingfu Vehicle Ham Mobile Radio Antenna shown installed on the lip of a vehicle's trunk, demonstrating a typical mounting position.
작업
Once properly installed, the Bingfu Vehicle Ham Mobile Radio Antenna operates passively, requiring no direct user interaction beyond its initial setup. Its primary function is to convert radio frequency signals into electrical signals for your radio receiver and vice-versa for transmission.
사용 지침:
- 주파수 호환성: Ensure your radio operates within the antenna's specified frequency ranges: VHF 136-174MHz and UHF 400-470MHz.
- SWR 점검: For optimal performance and to prevent damage to your radio, it is recommended to check the Standing Wave Ratio (SWR) after installation, especially if you are using a high-power transmitter. An SWR meter can be used for this purpose. The antenna is designed for a VSWR of <2.0.
- 환경 고려 사항: While designed for outdoor vehicle use, avoid exposing the antenna to extreme physical impacts or prolonged submersion in water.
- 케이블 관리 : Ensure the coaxial cable is not kinked, pinched, or excessively bent, as this can degrade signal quality.
유지
Regular maintenance helps ensure the longevity and consistent performance of your Bingfu antenna.
- 청소: Periodically clean the antenna and mounting bracket with a soft, damp 먼지, 때, 도로 오염물을 제거하는 데 천을 사용하십시오. 연마성 세척제나 용제는 사용하지 마십시오.
- 연결 확인: Annually, or if you notice a degradation in signal quality, inspect all connections (antenna to bracket, cable to bracket, cable to radio) to ensure they are secure and free from corrosion.
- 케이블 검사: Check the coaxial cable for any signs of wear, cuts, or damage. Ensure it is still securely routed and not exposed to excessive friction or heat.
- 브래킷 보안: Verify that the lip mount bracket remains firmly attached to your vehicle. Re-tighten screws if necessary, but do not overtighten.
문제 해결
안테나에 문제가 발생하면 다음과 같은 일반적인 문제 해결 단계를 고려해 보세요.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 신호 수신/송신 불량 |
|
|
| 안테나가 흔들리거나 헐거워집니다. |
|
|
| 소음 또는 간섭 |
|
|
명세서
Detailed technical specifications for the Bingfu Vehicle Ham Mobile Radio Antenna:
| 특징 | 세부 사항 |
|---|---|
| 주파수 범위 | VHF 136-174MHz, UHF 400-470MHz |
| 안테나 유형 | Vehicle Ham Mobile Radio Antenna |
| 특징 | Lip Fixed Bracket Mounting |
| VSWR | <2.0 |
| 임피던스 | 50옴 |
| 방향 | 전 방향 |
| 안테나 인터페이스 커넥터 | UHF PL259 Male 50 Ohm Connector |
| Antenna Mounting Connector | UHF SO239 Female Right Angle Bulkhead Mount 50 Ohm Connector |
| 케이블 커넥터 | UHF PL259 Male 50 Ohm Connector |
| 케이블 유형 | RG58 50 Ohm Coaxial Cable |
| 케이블 길이 | 5m / 16.5 Feet |
| 순중량 | 680g (약 1.5파운드) |
| 작동 온도 | -20°C ~ +80°C |
| 보관 온도 | -30°C ~ +85°C |
| 제품 치수 | 6.69 x 1.57 x 4.72 inches (Antenna unit and bracket) |
이미지: 상세 view of the antenna unit, highlighting its dimensions, the low-loss RG58 cable, and the UHF PL259 male connector.
보증 및 지원
For specific warranty information regarding your Bingfu Vehicle Ham Mobile Radio Antenna, please refer to the documentation provided at the time of purchase or contact the manufacturer directly. Bingfu is committed to offering timely technical advice and efficient after-sales service.
You can typically find support contact information on the official Bingfu web사이트나 소매업체를 통해 구매하세요.
Note: Optional protection plans may be available for purchase separately and are not part of the standard product warranty.
