1. 중요한 안전 정보
설치를 시작하기 전에 모든 지침을 읽고 이해하십시오. 지침을 따르지 않으면 감전, 화재 또는 심각한 부상이 발생할 수 있습니다.
- 전기 안전: All electrical wiring must be performed by a qualified electrician and comply with all local and national electrical codes. Disconnect power at the main circuit breaker before installation or servicing.
- 설치: The ceiling fan must be mounted to a structurally sound ceiling joist or outlet box capable of supporting the fan's weight (approximately 16.34 lbs). Ensure the mounting location allows for proper blade clearance.
- 블레이드 클리어런스: Maintain a minimum clearance of 7 feet from the floor to the bottom of the fan blades. Ensure there is adequate space around the fan for proper air circulation.
- Damp 평가: This fan motor is damp rated, suitable for indoor or covered outdoor use where it will not be directly exposed to water.
- 전문 설치 권장: Due to the complexity of electrical wiring and mounting, professional installation is highly recommended.
2. 패키지 내용
Verify that all components are present before beginning installation. If any parts are missing or damaged, contact Fanimation customer service.
- Fanimation Spitfire MA6721BBL Ceiling Fan Motor (Black)
- TR500 Handheld Remote Control (requires 23A battery, not included)
- 장착 하드웨어 키트
- 사용 설명서
메모: Fan blades and optional LED light kit are sold separately and are not included with this motor assembly.
3. 설정 및 설치
이 섹션에서는 일반적인view of the installation process. Always refer to the detailed installation guide included with your fan motor for specific steps and diagrams.
3.1 사전 설치 단계
- 전원 차단: Turn off power to the fan's circuit at the main electrical panel.
- 장착 위치: Confirm the ceiling joist or outlet box can support the fan's weight and provide adequate blade clearance.
3.2 Mounting the Fan Motor
Secure the mounting bracket to the ceiling outlet box. Carefully lift the fan motor assembly and attach it to the mounting bracket according to the specific instructions provided.

그림 1: 전체 view of the Fanimation Spitfire MA6721BBL Ceiling Fan Motor with blades and light kit installed.
3.3 전기 배선
Connect the fan's electrical wires to the household wiring. Ensure all connections are secure and properly insulated. This step requires electrical expertise.

그림 2: 클로즈업 view of the fan motor housing, showing connection points for wiring and blade attachment.
3.4 Attaching Blades and Light Kit (Sold Separately)
Once the motor is securely mounted and wired, attach the fan blades and any optional light kit according to their respective instructions. Ensure all screws are tightened appropriately.

그림 3: 상세 view of the fan motor with an optional LED light kit installed at the bottom.

그림 4: 상세 view of the fan motor without an optional light kit, showing the cover plate.
4. 사용 설명서
The Fanimation Spitfire MA6721BBL is controlled via the included TR500 handheld remote control or compatible smart home devices (sold separately).
4.1 Handheld Remote Control (TR500)
The TR500 remote provides comprehensive control over your fan's functions:
- 팬 속도: Adjusts between 3 speeds (Low, Medium, High).
- 리버스 스위치: Changes the direction of blade rotation for seasonal use.
- 조명 제어: If an optional light kit is installed, the remote can turn the light on/off and dim it.
- 수면 타이머 : Activates a timer function to automatically turn off the fan after a set period.
Ensure the remote has a fresh 23A battery installed for optimal performance.
4.2 양방향 공기 흐름
The fan features reversible airflow for multi-season use:
- 여름 모드(하향 기류): Blades rotate counter-clockwise, creating a downward breeze that produces a cooling effect.
- 겨울 모드(상승 기류): 날개가 시계 방향으로 회전하면서 차가운 공기를 위로 끌어올리고 천장의 따뜻한 공기를 아래로 밀어내어 열을 재분배하는 데 도움을 줍니다.
Use the reverse switch on the remote control to change the direction of airflow.

Figure 5: Illustration of reversible airflow, showing both downward (cooling) and upward (warming) air movement.
4.3 스마트 홈 호환성
The Fanimation Spitfire MA6721BBL is compatible with WiFi or Bluetooth controls (required controls sold separately) for integration with smart home systems. Refer to the documentation of your chosen smart home control system for setup instructions.
5. 유지관리
정기적인 유지관리는 천장선풍기의 수명과 최적의 성능을 보장합니다.
- 청소: 팬 블레이드와 모터 하우징을 부드러운 천으로 주기적으로 닦아주세요.amp cloth. Avoid using abrasive cleaners or solvents, as they may damage the finish. Ensure the fan is turned off and power is disconnected before cleaning.
- Tightness Checks: Periodically check all screws on the motor housing, downrod, and blade attachments to ensure they are secure. Loose screws can cause wobbling or noise.
- 블레이드 밸런스: If the fan wobbles, check that the blades are securely attached and balanced. A blade balancing kit (often sold separately) can help correct minor wobbles.
6. 문제 해결
This section addresses common issues you might encounter with your Fanimation Spitfire ceiling fan motor.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 팬이 켜지지 않음 | No power to the fan; Loose wiring; Remote battery dead or not paired. | Check circuit breaker; Verify all wire connections are secure (consult an electrician); Replace remote battery or re-pair remote. |
| 낮은 기류 | Fan speed set too low; Incorrect blade pitch; Fan size not appropriate for room. | Increase fan speed using the remote; Ensure blades are installed correctly; While this model offers 5227 CFM on high, consider room size and fan placement. |
| 팬이 흔들린다 | Loose mounting hardware; Unbalanced blades; Loose blade screws. | Ensure mounting bracket and downrod are secure; Check and tighten all blade screws; Use a blade balancing kit if necessary. |
| Remote control is unresponsive or finicky | Dead battery; Interference; Remote not paired correctly. | Replace the 23A battery; Ensure no obstructions between remote and fan receiver; Refer to remote pairing instructions in the full manual. |
| Light kit not working (if installed) | Loose wiring; Faulty bulb (if replaceable); Light kit not properly connected. | Check wiring connections to the light kit; If LED, ensure proper connection; Consult an electrician if issues persist. |
If you are unable to resolve an issue after consulting this troubleshooting guide, please contact Fanimation customer support or a qualified electrician.
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 팬애니메이션 |
| 모델 번호 | MA6721BBL |
| 색상 | 검은색 |
| 선풍기 디자인 | 천장 팬 모터 |
| 전원 | 코드식 전기 |
| 스타일 | 관습 |
| 특징 | 가역적 기류 |
| 추천 용도 | 환기 |
| 왓tage | 2760와트(2.76E+3) |
| 마무리 유형 | 완성된 |
| 블레이드 수 | 3 (Blades sold separately) |
| 기류 용량 | 5227 CFPH (Cubic Feet Per Hour) |
| 속도 설정 | 3 RPM(분당 회전수) |
| 권tage | 120.0 볼트 |
| 품목 무게 | 16.34 파운드 |
| 제품 치수 | 7.9 x 7.9 x 12 인치 |
| 포함된 구성 요소 | 원격 |
| 실내/실외 사용 | 실내, 실외(Damp 정격) |
| 제어 방법 | App (via compatible smart home controls, sold separately) |
| 한국어: | 840506085459 |
8. 보증 및 지원
8.1 보증 정보
This Fanimation Spitfire MA6721BBL Ceiling Fan Motor comes with a 제한된 평생 보증. Please refer to the warranty documentation included with your product for full terms and conditions, including coverage details and limitations.
8.2 고객 지원
For technical assistance, replacement parts, or warranty claims, please contact Fanimation customer support. You can find contact information on the official Fanimation web사이트 또는 제품의 원래 포장을 통해 확인할 수 있습니다.
방문하세요 아마존의 패니메이션 스토어 더 많은 제품과 정보를 확인하세요.





