1. 서론
The RCF F12 XR is a 12-channel analog mixer console designed for professional audio applications. It features high-quality preamplifiers, a comprehensive DSP effects section, and a built-in USB audio interface for recording and playback. This manual provides essential information for the proper setup, operation, and maintenance of your F12 XR mixer.
2. 중요한 안전 정보
기기를 작동하기 전에 모든 안전 지침을 읽고 숙지하십시오. 나중에 참조할 수 있도록 이 설명서를 보관하십시오.
- 전원: Connect the unit only to a power supply of the type described in this manual and marked on the unit. Ensure the power cord is not damaged or pinched.
- 통풍: 환기구를 막지 마십시오. 제조업체의 지침에 따라 설치하십시오.
- 물과 습기: 본 기기를 비나 습기에 노출시키지 마십시오. 물 근처에서 본 기기를 사용하지 마십시오.
- 열: 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음을 포함)와 같은 열원 근처에 설치하지 마십시오. amp열을 생성하는 발전기.
- 서비스: 이 제품을 직접 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 서비스 담당자에게 문의하십시오.
- 접지: 이 제품은 접지되어야 합니다.
3. 설정 가이드
3.1 풀기
Carefully remove the mixer from its packaging. Inspect the unit for any signs of damage that may have occurred during transit. Retain the original packaging for future transport or storage.
3.2 전원 연결
Connect the provided power cord to the AC input on the rear panel of the mixer (refer to Figure 2.1). Plug the other end into a suitable grounded electrical outlet. The F12 XR operates on a Corded Electric power source, compatible with 100-240V AC.
3.3 오디오 연결
The F12 XR offers various input and output options:
- 마이크 입력(XLR): Connect microphones to the XLR inputs (channels 1-6). Ensure phantom power (+48V) is enabled only when using condenser microphones that require it.
- 라인 입력(1/4" TRS/TS): Connect line-level sources such as keyboards, guitars (with DI box), or other audio devices to the 1/4" inputs.
- Stereo Inputs (1/4" TRS): Channels 5/6, 7/8, 9/10, and 11/12 can accept stereo line-level signals.
- 주요 출력(XLR): 이 장치들을 메인 PA 시스템이나 스튜디오 모니터에 연결하세요.
- 제어실 출력(1/4" TRS): Connect to control room monitors.
- 전화기 출력(1/4" TRS): 모니터링을 위해 헤드폰을 연결하세요.
3.4 USB 연결
Connect a USB cable from the USB port on the rear panel of the mixer to your computer. The F12 XR functions as a 2-in/2-out USB audio interface, allowing you to record the main mix and play back audio from your computer.
4. 사용 설명서
4.1 이상view 컨트롤의
The F12 XR features a logical layout of controls for intuitive operation. Each channel strip provides dedicated controls for input gain, equalization, auxiliary sends, pan, mute, and level fader. The master section includes controls for the main mix, effects, and monitoring.
4.2 채널 스트립 컨트롤
- 이득: Adjusts the input sensitivity for the connected microphone or line source.
- EQ(고, 중, 저): 각 채널의 음색을 조절하는 3밴드 이퀄라이저.
- AUX 1/2: Sends for creating monitor mixes or external effects sends.
- FX : Send level to the internal DSP effects processor.
- PAN : 스테레오 필드(좌우) 내에서 채널 신호의 위치를 지정합니다.
- 음소거: Silences the channel's output to the main mix and AUX sends.
- 피크 LED: 입력 신호가 너무 높을 때, 즉 클리핑이 발생할 가능성이 있을 때 점등됩니다.
- 페이더 : 메인 믹스에서 해당 채널의 전체 레벨을 조절합니다.
4.3 Main Mix and Output Controls
- 메인 믹스 페이더: 스테레오 메인 믹스의 전체 출력 레벨을 제어합니다.
- CTRL ROOM LEVEL: Adjusts the volume of the control room outputs.
- 휴대폰 사용 수준: 헤드폰 출력 볼륨을 조절합니다.
- VU 미터: Provide visual indication of the main output level.
4.4 DSP Effects Section
The F12 XR includes a PRO DSP FX section with 16 professional effects presets. Use the dedicated controls to select and adjust the desired effect. The FX RETURN fader controls the overall level of the effects in the main mix.
4.5 USB 오디오 인터페이스
The integrated USB audio interface allows for 2-channel recording of the main mix to a computer and 2-channel playback from a computer. Ensure your computer's operating system recognizes the mixer as an audio device. No special drivers are typically required for basic functionality.
5. 유지관리
5.1 청소
To clean the mixer, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or waxes. Avoid spraying liquids directly onto the unit.
5.2 보관
When not in use for extended periods, store the mixer in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging for protection.
6. 문제 해결
If you encounter issues with your F12 XR mixer, refer to the following common problems and solutions:
- 전원 없음: Ensure the power cord is securely connected to both the mixer and a working electrical outlet. Check the power switch position and the fuse on the rear panel.
- 사운드 출력 없음: Verify that the main mix fader is up, and individual channel faders are at appropriate levels. Check all cable connections to speakers/monitors. Ensure the MUTE buttons are not engaged on active channels.
- 왜곡된 소리: Reduce the GAIN on input channels if the PEAK LED is frequently illuminating. Lower the main mix fader if the output meters are consistently in the red. Check for impedance mismatches with connected equipment.
- USB 오디오가 작동하지 않습니다: Confirm the USB cable is properly connected. Check your computer's sound settings to ensure the F12 XR is selected as the input/output device. Restart your computer and the mixer.
- 들리지 않는 효과: Ensure the FX send knob on the desired channel is turned up, and the FX RETURN fader in the master section is at an audible level.
If the problem persists, contact RCF customer support or a qualified service technician.
7. 기술 사양
- 상표: 리시피에이
- 모델 번호: 17140090
- 채널 수: 12
- 연결 기술 : USB
- 오디오 입력: XLR
- 전원: 코드식 전기
- 제품 크기: 1712.6 x 1712.6 x 570.87 인치
- 첫 이용 가능 날짜: 12년 2019월 XNUMX일
8. 보증 및 지원
For information regarding warranty coverage, service, or technical support, please refer to the warranty card included with your product or visit the official RCF web사이트. 직접 장치를 수리하려고 시도하지 마십시오. 보증이 무효화될 수 있습니다.
