ELEGOO Standard Photopolymer Resin User Manual

1. 서론

This manual provides essential instructions for the safe and effective use of ELEGOO Standard Photopolymer Resin. This 405nm UV-curing resin is designed for LCD, MSLA, and DLP 3D printers, offering reliable performance for various printing applications. Please read this manual thoroughly before use to ensure optimal results and safety.

Image 1.1: ELEGOO Standard Photopolymer Resin (Black) and an examp3D 프린트.

2. 안전수칙

Handling photopolymer resin requires adherence to specific safety guidelines to prevent adverse reactions and ensure a safe working environment.

• 보호 장비를 착용하세요: Always wear gloves (nitrile recommended) and a mask (respirator with organic vapor cartridges) to avoid direct skin contact and inhalation of fumes.
• 통풍: Use the resin in a well-ventilated area to minimize exposure to odors and fumes.
• 온도 조절: Maintain a recommended ambient temperature of 20°C - 25°C (68°F - 77°F) for optimal resin performance and safety.
• 직사광선을 피하세요: Store resin away from direct sunlight and UV light sources, as this can cause premature curing.
• 긴급 연락처: In case of skin contact, wash immediately and thoroughly with plenty of soap and water. If irritation persists, seek medical attention. For eye contact, flush with water for at least 15 minutes and seek immediate medical attention.
• 어린이의 손이 닿지 않는 곳에 보관하세요: Store resin out of reach of children and pets.

Image 2.1: Important safety and usage guidelines for ELEGOO resin.

3. 제품 오버view

ELEGOO Standard Photopolymer Resin is a high-quality liquid resin formulated for 3D printing. It cures under 405nm UV light, making it compatible with most LCD, MSLA, and DLP 3D printers. This resin offers good detail, smooth finishes, and stable performance for a wide range of models.

3.1 호환성

This resin is suitable for 3D printers utilizing UV light source technology, including but not limited to ELEGOO Mars, Anycubic Photon, Zortrax Inkspire, SparkMaker, Phrozen Shuffle, and Monoprice MP Mini.

Image 3.1: ELEGOO resin compatibility with various 3D printers using UV light source technology.

4. 설정 및 준비

1. 병을 흔들어라: Before each use, thoroughly shake the resin bottle for at least 30 seconds to ensure all components are well mixed. This is crucial for consistent print quality.
2. 환경 조건: Ensure your printing environment is within the recommended temperature range of 20°C - 25°C (68°F - 77°F). Extreme temperatures can affect resin viscosity and curing properties.
3. 레진 붓기: Carefully pour the desired amount of resin into your printer's resin vat. Avoid overfilling.

Image 4.1: The production date is printed on the resin bottle label.

5. Operating Instructions (Printing Guidelines)

The following settings are recommended starting points for the ELEGOO Mars printer. Optimal settings may vary depending on your specific printer model, ambient temperature, and desired print quality. Always perform calibration prints to fine-tune your settings.

• 바닥 노출 시간 : 70초
• 정상 노출 시간: 13~15초

For other printer models, consult your printer's manufacturer guidelines or community-shared settings for 405nm standard photopolymer resins.

Image 5.1: Recommended exposure settings for ELEGOO Mars printer.

6. Post-Processing and Curing

1. 인쇄물 제거: Carefully remove the printed model from the build plate using a scraper.
2. 씻다: Clean the printed model thoroughly with 95% (or higher) isopropyl alcohol (IPA) or a specialized resin cleaner. Use a soft brush if necessary to remove uncured resin from crevices.
3. 마른: Allow the model to air dry completely or use compressed air. Ensure no residual alcohol remains.
4. 치료 후: Place the dried model under a 405nm UV light source for final curing. Curing times vary depending on the size and complexity of the model, typically ranging from a few minutes to an hour. Ensure all surfaces are exposed to UV light.

이미지 6.1: Example of a detailed 3D print after post-processing.

이미지 6.2: 또 다른 전ample of a 3D printed model.

7. 유지 관리 및 보관

• 수지 보관: Store unused resin in its original opaque bottle, tightly sealed, in a cool, dry, and dark place. Avoid exposure to direct sunlight or any UV light source.
• 온도: Maintain storage temperature between 15°C - 35°C (59°F - 95°F).
• 처분: Do not pour liquid resin down the drain. Cure any leftover liquid resin under UV light until solid, then dispose of it as solid plastic waste according to local regulations.
• Cleaning the Vat: After printing, filter any remaining resin in the vat back into the bottle using a fine mesh filter to remove cured particles. Clean the resin vat with IPA if changing resin types or for long-term storage.

Image 7.1: Recommended storage conditions for ELEGOO resin.

Image 7.2: ELEGOO resin packaging.

8. 문제 해결

If you encounter issues during printing, consider the following common troubleshooting steps:

• 인쇄 불량/접착 불량:
  • 빌드 플레이트가 제대로 수평이고 깨끗한지 확인하세요.
  • Increase bottom exposure time.
  • 주변 온도가 권장 범위 내에 있는지 확인하십시오.
  • Check for FEP film damage or cloudiness in the resin vat.
• Soft/Under-cured Prints:
  • 일반적인 노출 시간을 늘리십시오.
  • Ensure the UV light source is functioning correctly.
  • Confirm proper post-curing procedures.
• 깨지기 쉬운 프린트:
  • 일반적인 노출 시간을 약간 줄이세요.
  • Avoid over-curing during post-processing.
• Resin Not Mixing Properly:
  • Shake the resin bottle thoroughly before use.
  • Ensure resin is stored at the correct temperature.

9. 사양

10. 보증 및 지원

For warranty information, technical support, or any inquiries regarding your ELEGOO Standard Photopolymer Resin, please visit the official ELEGOO website or contact ELEGOO customer service directly. Ensure you have your product details and purchase information available when seeking support.

엘레구 공식 스토어: 아마존에서 ELEGOO 스토어를 방문하세요