소개
This manual provides essential instructions for the setup, operation, and maintenance of your KOAMTAC KDC470Ci-BLE 2D Imager Barcode Sled Scanner combined with the Apple iPhone 7/8Plus SmartSled Charging Case. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
Image: The KOAMTAC KDC470Ci-BLE 2D Imager Barcode Sled Scanner integrated with an Apple iPhone 7/8Plus via the SmartSled Charging Case. This side view highlights the compact design and the connection points between the scanner and the smartphone case.
제품 끝view
The KOAMTAC KDC470Ci-BLE is a robust 2D CMOS Imager Barcode Sled Scanner designed for mobile data collection. When paired with the Apple iPhone 7/8Plus SmartSled Charging Case, it transforms your smartphone into a comprehensive barcode scanning solution. Key features include:
- 2D CMOS Imager: Capable of reading various 2D barcodes.
- SmartSled Design: Allows for easy integration and removal of the iPhone 7/8Plus.
- 동시 충전: The SmartSled case enables simultaneous charging of both the KDC470Ci-BLE scanner and the iPhone 7/8Plus via a Micro USB cable or charging cradle.
- 내구성 있는 구조: IP65 등급의 방진 및 방수 기능을 갖추고 있으며, 5피트 높이에서 떨어뜨려도 견딜 수 있도록 설계되었습니다.
- 배터리 수명 연장: Advanced power management features, including a hibernation mode, extend battery life beyond an average work shift. The built-in rechargeable battery can also serve as an external power source for the iPhone.
- 소프트웨어 호환성 : Includes KT Sync keyboard wedging software and an SDK for Android, Blackberry, iOS, and Windows platforms.
설치 지침
- 짐 풀기: Carefully remove all components from the packaging. Verify that you have the KDC470Ci-BLE scanner, the Apple iPhone 7/8Plus SmartSled Charging Case, and any included cables or accessories.
- 아이폰을 삽입하세요: Gently slide your Apple iPhone 7/8Plus into the SmartSled Charging Case until it is securely seated. Ensure all connectors align properly.
- Attach Scanner: Connect the KDC470Ci-BLE scanner to the SmartSled Charging Case. The scanner is designed to seamlessly attach to the back of the case, forming a single integrated unit.
- 초기 청구 : Before first use, fully charge the integrated unit. Connect the Micro USB cable to the SmartSled Charging Case and then to a power source. The scanner and iPhone will charge simultaneously.
- 소프트웨어 설치:
- For basic keyboard wedging functionality, install the KT Sync software on your host device (e.g., iPhone).
- For custom application development, utilize the provided SDK for your specific operating system (iOS in this case).
- Bluetooth Pairing (if not using direct connection):
- Power on the KDC470Ci-BLE scanner.
- On your iPhone, navigate to Bluetooth settings and search for available devices.
- Select the KDC470Ci-BLE from the list to pair. Follow any on-screen prompts.
작동 지침
바코드 스캔
- 전원 켜기: Ensure the KDC470Ci-BLE scanner is powered on.
- Target Barcode: Point the scanner's imager window at the barcode you wish to scan.
- Activate Scan: Press the scan button located on the side of the KDC470Ci-BLE. A red aiming beam will appear.
- 스캔 확인: Once the barcode is successfully read, the scanner will typically emit an audible beep and/or vibrate, and the data will be transmitted to your connected iPhone application.
장치 충전하기
The SmartSled Charging Case allows for convenient charging of both the KDC470Ci-BLE scanner and the iPhone 7/8Plus simultaneously.
- Connect a Micro USB cable to the charging port on the SmartSled case.
- USB 케이블의 다른 쪽 끝을 호환되는 USB 전원 어댑터 또는 컴퓨터의 USB 포트에 연결하십시오.
- Alternatively, place the SmartSled unit into a compatible KOAMTAC charging cradle (sold separately) for simultaneous charging.
전원 관리
The KDC470Ci-BLE features advanced power management to conserve battery life. When not actively in use, the scanner enters a "hibernation mode" to extend operational time. To reactivate, simply press the scan button or interact with the device via your iPhone application.
유지
- 청소: 부드럽고 털이 없는 천을 살짝 사용하세요.ampened with water or a mild cleaning solution to clean the exterior of the scanner and case. Avoid harsh chemicals or abrasive materials. Do not spray liquids directly onto the device.
- 저장: 본 기기는 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
- 배터리 관리 : To prolong battery life, avoid fully discharging the battery frequently. If storing for an extended period, ensure the battery is charged to approximately 50%.
- 펌웨어 업데이트: Periodically check the KOAMTAC website for firmware updates for your KDC470Ci-BLE scanner. Keeping the firmware updated ensures optimal performance and access to new features.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스캐너 전원이 켜지지 않습니다. | 배터리가 부족하거나 방전되었습니다. | Charge the device using the Micro USB cable or charging cradle. |
| Unable to scan barcodes. | Barcode damaged or unreadable; scanner not aimed correctly; incorrect symbology settings. | Ensure the barcode is clear. Aim the red beam directly across the barcode. Check scanner settings for supported symbologies. |
| No data transmitted to iPhone. | Bluetooth connection lost; application not configured correctly; iPhone not securely seated in SmartSled. | Verify Bluetooth connection. Restart the scanning application. Re-seat the iPhone in the SmartSled case. |
| 장치가 충전되지 않습니다. | Faulty cable or power adapter; charging port obstruction; iPhone not properly connected. | Try a different Micro USB cable and power adapter. Inspect the charging port for debris. Ensure the iPhone is fully seated in the SmartSled. |
명세서
- 모델 번호: 381150 (KDC470Ci-BLE)
- 스캐너 유형 : 2D CMOS 이미 저
- 호환성: Apple iPhone 7/8Plus (with SmartSled Case), Desktop, Laptop, Smartphone
- 연결성: Bluetooth Low Energy (BLE), USB Cable
- 전원: 배터리 전원, USB 케이블
- 환경 등급 : IP65
- 드롭 사양: 5피트(1.5미터)
- 품목 무게: 8.8온스(약 249그램)
- 패키지 크기: 6.1 x 4.2 x 1.5인치(약 15.5 x 10.7 x 3.8cm)
- 제조업체: 코 암택
- 첫 번째 이용 가능: 13년 2018월 XNUMX일
보증 및 지원
보증 정보 및 기술 지원에 대해서는 KOAMTAC 공식 웹사이트를 참조하십시오. website or contact KOAMTAC customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.
- 제조업체: 코 암택
- Web대지: www.koamtac.com
- 연락하다: Refer to the KOAMTAC web연락처 정보와 지원 리소스는 해당 사이트에서 확인하세요.
