소개
The Graco Ultra 395 PC Stand Electric Airless Paint Sprayer, model ULTRA 395 PC, is designed for professional painting applications, offering consistent performance and durability. This manual provides essential information for the safe and effective operation, setup, maintenance, and troubleshooting of your sprayer.
주요 특징:
- SmartControl 1.0 Pressure Control: Ensures a consistent spray fan without fluctuation by constantly monitoring performance and adjusting motor speed to match tip size and spraying needs. Ideal for fine finish and low overspray applications.
- Durable Endurance Chromex Piston Pump: Engineered for extended life, lasting significantly longer than comparable pumps. Features Long Life V-Max Blue Packings, a Chromex rod, and a hardened stainless steel cylinder.
- QuikAccess Intake Valve: Facilitates faster cleaning and maintenance.
- Durable TEFC DC Motor: Provides high torque for maximum power across all painting applications, enabling efficient work completion.
설정
Proper setup is crucial for optimal performance and safety. Always ensure the sprayer is on a stable, level surface before beginning setup.
- 포장 풀기 및 검사: Carefully remove all components from the packaging. Inspect the sprayer, hose, gun, and accessories for any signs of damage.
- 호스 연결: Connect the high-pressure hose to the sprayer's fluid outlet and to the spray gun. Ensure all connections are tight to prevent leaks.
- 팁 설치: Install the appropriate spray tip into the spray gun. Refer to your paint manufacturer's recommendations for tip size.
- 전원 연결: Connect the sprayer to a grounded electrical outlet. Ensure the power source meets the sprayer's requirements.
- 애벌칠: Follow the priming procedure outlined in the detailed Graco manual to prepare the pump for operation and remove air from the system. This typically involves placing the suction tube into the paint and the return tube into a waste bucket, then cycling the prime/spray valve.
Image: The Graco Ultra 395 PC sprayer with its blue high-pressure hose and spray gun, ready for setup. This image shows the complete system components.
운영
Operating the Graco Ultra 395 PC requires understanding its controls and proper spraying techniques for best results.
- 압력 조정: Use the SmartControl 1.0 system to set the desired pressure. Start with a lower pressure and gradually increase until a consistent spray pattern is achieved without tails.
- 분무 기술: Maintain a consistent distance from the surface (typically 10-12 inches) and move the gun parallel to the surface. Overlap each pass by approximately 50% to ensure even coverage.
- 트리거 제어: Engage the trigger fully at the beginning of each pass and release at the end. Avoid feathering the trigger.
- 재료 호환성: The sprayer is designed for a wide range of coatings. Always ensure the material is properly thinned (if required) and strained to prevent clogs.
Image: A person demonstrating the portability of the Graco Ultra 395 PC sprayer by carrying it using its integrated handle. This highlights its compact design for ease of transport.
유지
Regular maintenance is essential to prolong the life of your Graco Ultra 395 PC sprayer and ensure consistent performance. Neglecting cleaning can lead to significant issues.
- Immediate Cleaning After Use: The most critical maintenance step is thorough cleaning immediately after each use. Flush the system with appropriate cleaning solution (water for latex, mineral spirits for oil-based paints) until the fluid runs clear.
- 필터 청소: Regularly clean or replace the gun filter and manifold filter to prevent clogs and maintain spray quality.
- 팁 유지 관리: Clean spray tips after each use. If a tip becomes clogged during operation, use the reversible tip feature to clear it.
- 펌프 보호: For long-term storage, use a pump protector fluid to prevent corrosion and keep packings lubricated.
- QuikAccess Intake Valve: Periodically check and clean the QuikAccess intake valve to ensure proper function and prevent paint buildup, which can affect pressure and priming.
문제 해결
This section addresses common issues you might encounter with your Graco Ultra 395 PC sprayer.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 무압력 / 저압력 | Clogged filter or tip; Air in system; Worn packings; Intake valve obstruction. | Clean or replace filters/tip. Re-prime the sprayer. Inspect and clean the QuikAccess intake valve for hardened paint buildup. If packings are worn, professional service may be required. |
| 맥동 스프레이 | Air in system; Clogged filter; Worn spray tip. | Re-prime the sprayer. Clean or replace filters. Replace worn spray tip. |
| Sprayer Runs Continuously | Air leak; Worn spray tip; Pressure sensor issue. | Check all connections for leaks. Replace worn spray tip. If the issue persists, contact Graco support. |
| Poor Spray Pattern (Tails) | Insufficient pressure; Worn spray tip; Material too thick. | Increase pressure. Replace worn spray tip. Thin material according to manufacturer's instructions. |
For more detailed troubleshooting or issues not listed here, refer to the comprehensive Graco user manual or contact Graco customer support.
명세서
| 기인하다 | 세부 사항 |
|---|---|
| 상표 | 그라코 |
| 모델명 | Graco Ultra 395 PC |
| 품목 모델 번호 | ULTRA 395 PC |
| 색상 | 파란색 |
| 추천 용도 | 그림 |
| 재료 | 스테인리스 스틸 |
| 품목 무게 | 54 파운드 |
| 제품 치수 | 폭 16인치 x 높이 18.5인치 |
| 전원 | 코드식 전기 |
| 포함된 구성 요소 | 호스 |
| 한국어: | 755652818564 |
| 제조업체 | 그라코 |
보증 및 지원
Graco products are built for durability and performance. For specific warranty information regarding your Graco Ultra 395 PC sprayer, please refer to the documentation included with your purchase or visit the official Graco web대지.
Optional protection plans are available for extended coverage, such as 3-Year and 4-Year Protection Plans. For customer support, technical assistance, or to inquire about service, please contact Graco directly or visit their official store page:
