소개
The Snap Circuits Teach Tech Mech 5 is a mission-based, entry-level STEM coding robot designed to introduce users to mechanical engineering principles and coding basics. This manual provides detailed instructions for assembly, operation, and maintenance of your Mech 5 robot.
이미지: 앞면 view of the Teach Tech Mech 5 Mechanical Coding Robot product box, displaying the robot and its key features.
안전 정보
Please read and understand all safety warnings before assembly and operation.
- 소형 부품 경고: 본 제품에는 작은 부품이 포함되어 있어 질식 위험이 있으므로 3세 미만 어린이에게는 적합하지 않습니다.
- 조립 및 사용 권장 연령은 10세 이상입니다.
- Adult supervision is recommended during assembly, especially when cutting parts from frames.
- 배터리를 올바른 극성으로 삽입했는지 확인하십시오. 오래된 배터리와 새 배터리를 혼용하거나, 종류가 다른 배터리를 사용하지 마십시오.
상자 안에 무엇이 들어있나요?
조립을 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- Assembly Parts (over 220 pieces)
- Instruction Manual in English
메모: 2 AAA batteries are required for operation and are not included. Tools such as diagonal cutters, a small screwdriver, and sandpaper may be helpful for assembly but are not included.
이미지: 뒤로 view of the product box, detailing the kit contents and a visual overview of the assembly and coding process.
조립 설명서
The Mech 5 robot requires assembly. Follow the detailed instructions provided in the included physical manual for step-by-step guidance. The assembly process involves cutting parts from frames and securing them with screws.
- 준비: Lay out all parts and identify them according to the manual's diagrams. Have necessary tools (diagonal cutters, small screwdriver, sandpaper) ready.
- 부품 제거: Carefully cut each part from its plastic frame. Use sandpaper to smooth any rough edges or "barbs" to ensure gears and moving parts operate smoothly.
- 구조 조립: Follow the manual's sequence to build the robot's main body, chassis, and movable components. Pay close attention to gear placement and alignment.
- Motor and Battery Installation: Install the motor as directed. Insert 2 AAA batteries into the battery compartment, ensuring correct polarity.
- 부착 조립: Assemble the desired attachment (e.g., soccer-bot, forklift-bot, drawing-bot) according to the manual.
팁: Patience is key during assembly. Double-check each step to ensure proper function. If parts are stiff, ensure all excess plastic has been removed.
작동 지침
The Mech 5 robot is programmed using a mechanical coding wheel. This allows for various movements and actions without the need for a computer or app.
1. Understanding the Coding Wheel
이미지: 자세한 view of the mechanical coding wheel, showing how coding buttons snap into place.
The coding wheel has slots where coding buttons are inserted. Each button corresponds to a specific command (e.g., forward, backward, turn, action). The sequence of these buttons dictates the robot's program.
Image: A child demonstrating how to program tasks by placing coding buttons onto the mechanical coding wheel, with the robot configured for drawing.
2. 기본 동작
- 앞으로 뒤로: Insert coding buttons that instruct the robot to move straight.
- 360° 회전: Use specific coding buttons to make the robot rotate in place.
- 선회: Combine forward/backward movements with rotation commands to execute turns.
Image: Visual representation of the robot's basic movements: moving forward and backward, rotating 360 degrees, and performing an action.
3. Performing Tasks with Attachments
The Mech 5 can perform various tasks by changing its attachments and programming the coding wheel accordingly.
- Soccer-Bot: Attach the kicking mechanism. Program the robot to move towards a ball and execute a kick command.
Image: The Mech 5 robot in Soccer-Bot configuration, ready to kick a ball.
- Forklift-Bot: Attach the forklift. Program the robot to approach an object, lower the forklift, lift the object, and transport it.
Image: The Mech 5 robot in Forklift-Bot configuration, lifting a transparent blue block.
- Drawing-Bot: Attach a marker pen (not included). Program the robot to move in patterns to draw shapes or lines.
Image: The Mech 5 robot in Drawing-Bot configuration, holding a marker pen.
- Other tasks include throwing and lifting, depending on the configured attachment.
이미지: 시각적 examples of the robot performing kick, draw, and lift functions.
유지
- 청소: Wipe the robot with a dry, soft cloth. Avoid using water or cleaning solutions directly on electronic components.
- 배터리 교체: Replace AAA batteries when the robot's movements become sluggish or stop. Always replace both batteries at the same time.
- 장비 검사: Periodically check gears for any debris or wear. Ensure they rotate freely.
- 저장: Store the robot and its components in a dry, cool place away from direct sunlight. If storing for extended periods, remove the batteries.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Robot does not move or moves erratically. |
|
|
| Attachments do not function correctly. |
|
|
| Robot makes loud noises during operation. |
|
|
명세서
| 특징 | 세부 사항 |
|---|---|
| 제품 모델 번호 | TTC-895 |
| ASIN | B07NVD43MD |
| 상표 | 스냅 회로 |
| 제조업체 | 엘렌코 일렉트로닉스 유한회사 |
| 추천연령 | 10세 이상 |
| 전원 | AAA 배터리 2개 (포함되지 않음) |
| 제품 치수 | 12.4 x 2.5 x 9.1 인치 |
| 품목 무게 | 1 파운드 |
| 부품 수 | 220 이상 |
보증 및 지원
Specific warranty information for the Snap Circuits Teach Tech Mech 5 is typically provided with the product packaging or can be obtained directly from the manufacturer, Elenco Electronics LLC. Please refer to the documentation included in your product box for warranty details.
For further assistance, technical support, or to explore other products, please visit the official Snap Circuits store:
