1. 서론
This manual provides essential information for the safe and efficient use of your HENDI Support Stand, Model 223666. This stand is specifically designed to accommodate up to five HENDI NANO GN 2/3 convection steam ovens, models 223291 and 223307. Please read these instructions thoroughly before installation and operation to ensure proper functionality and longevity of the product.
2. 안전 지침
부상이나 손상을 방지하려면 항상 다음 안전 지침을 준수하세요.
- Ensure the stand is placed on a stable, level, and non-slip surface capable of supporting the combined weight of the stand and the ovens.
- Do not exceed the maximum load capacity of the stand. It is designed for 5x NANO GN 2/3 ovens.
- Distribute weight evenly across the stand's shelves.
- Keep the area around the stand clear to prevent tripping hazards.
- Regularly inspect the stand for any signs of damage, loose connections, or instability. Do not use if damaged.
- Assembly should be performed by at least two people due to the weight and size of the components.
- Wear appropriate personal protective equipment (PPE) during assembly and handling, such as gloves.
3. 제품 설명 및 구성 요소
The HENDI Support Stand (Model 223666) is a robust, stainless steel structure designed for commercial kitchen environments. It features multiple levels to securely hold HENDI NANO GN 2/3 ovens.
포함된 구성 요소:
- 1x HENDI Support Stand frame (Model 223666)
- Assembly hardware (screws, bolts, adjustable feet)
Note: HENDI NANO GN 2/3 ovens (models 223291 & 223307) are sold separately.
그림 1: 앞쪽 view of the HENDI Support Stand, Model 223666. This image shows the sturdy stainless steel construction and the multiple rack levels designed to hold GN 2/3 ovens.
그림 2: 각진 view of the HENDI Support Stand, highlighting the robust frame and the integrated runners for GN 2/3 containers or ovens. The adjustable feet are visible at the base.
4. 설정 및 설치
Follow these steps for proper assembly and placement of your HENDI Support Stand:
- 구성 요소 풀기: Carefully remove all parts from the packaging. Verify that all components listed in Section 3 are present and undamaged.
- 프레임 조립: Connect the frame components using the provided hardware. Ensure all screws and bolts are tightened securely. Refer to the included assembly diagram (if provided with physical product) for specific connection points.
- 조절 가능한 발 부착: 조절 가능한 발을 각 다리 바닥에 나사로 고정합니다.
- 스탠드 위치: Place the assembled stand in its desired location. Ensure the surface is level and stable.
- 스탠드 수평 맞추기: Adjust the feet to ensure the stand is perfectly level and stable. This is crucial for the safe operation of the ovens placed on it.
- Place Ovens: Carefully lift and place the HENDI NANO GN 2/3 ovens onto the designated shelves of the support stand. Ensure they are seated securely and do not wobble.
5. 이용 가이드라인
The support stand is designed to provide a stable and organized platform for your HENDI NANO GN 2/3 ovens. Observe the following guidelines for optimal use:
- Always ensure ovens are properly positioned and stable on the stand before operation.
- When loading or unloading heavy items, maintain balance and avoid sudden movements that could destabilize the stand.
- Do not use the stand for purposes other than supporting compatible HENDI ovens or GN containers.
- Avoid leaning on the stand or applying excessive force to its structure.
6. 유지관리 및 청소
Regular maintenance and cleaning will extend the life of your HENDI Support Stand:
- 매일 청소: 광고로 모든 표면을 닦아보세요amp cloth and mild detergent. Rinse with clean water and dry thoroughly to prevent water spots and corrosion.
- 연마제를 피하세요: Do not use abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch the stainless steel finish.
- 정기 검사: 모든 볼트와 나사가 단단히 조여져 있는지 정기적으로 점검하세요. 필요하면 다시 조이세요.
- 레벨 확인: Verify that the stand remains level, especially after moving or heavy use. Adjust the feet as needed.
7. 문제 해결
If you encounter issues with your support stand, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 스탠드가 흔들리거나 불안정합니다. | Uneven floor surface; loose adjustable feet; loose frame connections. | Adjust the feet to level the stand. Ensure all feet are making firm contact with the floor. Check and tighten all frame bolts and screws. |
| Ovens do not fit correctly. | Incorrect oven model; improper placement. | Verify that your ovens are HENDI NANO GN 2/3 models 223291 or 223307. Ensure ovens are placed squarely on the support rails. |
| Visible damage or corrosion. | Impact damage; improper cleaning; exposure to harsh chemicals. | Discontinue use if structural integrity is compromised. Clean regularly with mild detergents. Avoid harsh chemicals. Contact HENDI support for replacement parts if necessary. |
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | 223666 |
| 상표 | 헨디 |
| 치수(길이 x 너비 x 높이) | 700 x 580 x 700mm |
| 무게 | 64kg |
| 호환성 | HENDI NANO GN 2/3 Ovens (Models 223291 & 223307) |
| 재료 | 스테인리스 스틸 |
| 원산지 | 폴란드 |
9. 보증 정보
HENDI products are manufactured to high-quality standards. For specific warranty terms and conditions applicable to your HENDI Support Stand (Model 223666), please refer to the warranty card included with your purchase or visit the official HENDI web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
10. 지원 및 연락처
If you have any questions, require technical assistance, or need to order replacement parts, please contact HENDI customer service. You can find contact information on the official HENDI web사이트 또는 지역 유통업체를 통해 구매하세요.
Official HENDI Web대지: www.hendi.eu
지원팀에 문의하실 때는 제품 모델 번호(223666)와 구매일을 미리 준비해 주세요.