Xprinter Q200 80mm 열전사 POS 영수증 프린터 사용 설명서

1. 서론

The Xprinter Q200 is an 80mm thermal Point-of-Sale (POS) receipt printer designed for commercial applications. It features high-speed printing, an integrated autocutter, and versatile connectivity options including USB and LAN (Ethernet). This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Xprinter Q200 printer.

2. 안전 정보

• 프린터가 올바른 전압의 접지형 전원 콘센트에 연결되어 있는지 확인하십시오.tage.
• 프린터를 물이나 과도한 습기에 노출시키지 마십시오.
• 프린터를 직사광선이나 열원 근처에 두지 마십시오.
• Use only the specified power adapter provided with the printer.
• 프린터 내부 부품 손상을 방지하기 위해 먼지와 이물질로부터 프린터를 멀리하십시오.
• 프린터를 직접 열거나 수리하려고 하지 마십시오. 자격을 갖춘 서비스 담당자에게 문의하십시오.
• Handle thermal paper carefully; avoid touching the thermal print head immediately after printing as it may be hot.

3. 패키지 내용

Please check the package contents upon unpacking. If any items are missing or damaged, contact your vendor.

• Xprinter Q200 Thermal Receipt Printer
• 전원 어댑터
• 전원 케이블
• USB 데이터 케이블
• Thermal Paper Roll (for initial testing)
• 사용 설명서 (본 문서)

4. 제품 오버view

4.1 프린터 구성 요소

그림 1: Xprinter Q200 Thermal POS Receipt Printer, showing the overall design with the Xprinter logo and power switch on the front.

그림 2: 앞쪽 view of the Xprinter Q200, highlighting the power switch and the Xprinter branding.

그림 3: 맨 위 view of the Xprinter Q200 with the paper cover open, revealing the thermal paper compartment and the print head mechanism.

4.2 후면 패널 및 연결성

그림 4: 뒤쪽 view of the Xprinter Q200, displaying the various connectivity ports and the DIP switch configuration table.

The rear panel of the Xprinter Q200 provides the following connection ports:

• Serial Port (DB9): 직렬 통신용.
• USB Port (Type-B): 컴퓨터에 직접 연결합니다.
• LAN 포트(RJ45): 네트워크 연결을 위해.
• Cash Drawer Port (RJ11): To connect a cash drawer.
• 전원 입력: 전원 어댑터를 연결합니다.

4.3 DIP 스위치 설정

The DIP switches on the rear panel allow for configuration of various printer functions. Refer to the table below for settings:

메모: Ensure the printer is powered off before changing DIP switch settings.

5. 설정

5.1 전원 연결

1. 전원 케이블을 전원 어댑터에 연결합니다.
2. Plug the power adapter's output connector into the power input port on the rear of the printer.
3. 전원 케이블을 적합한 콘센트에 꽂으세요.

5.2 Connecting Data Cable

다음 연결 방법 중 하나를 선택하십시오.

• USB 연결: Connect one end of the USB cable to the USB Type-B port on the printer and the other end to an available USB port on your computer.
• LAN(이더넷) 연결: Connect an Ethernet cable to the LAN port on the printer and the other end to your network router or switch.
• 직렬 연결: Connect a serial cable to the DB9 serial port on the printer and the other end to the serial port on your computer.

5.3 감열지 넣기

1. Press the cover open button (usually located on the side or front of the printer) to open the top cover.
2. Insert the 80mm thermal paper roll into the paper compartment with the printing surface facing upwards.
3. Pull a small amount of paper out past the cutter blade.
4. 윗덮개를 딸깍 소리가 나면서 제자리에 고정될 때까지 단단히 닫으세요.

5.4 드라이버 설치

For USB or Serial connections, a printer driver is typically required. For LAN connections, the printer can often be configured via its IP address. Refer to the driver CD (if included) or the manufacturer's website for the latest drivers and installation instructions compatible with your operating system.

6. 사용 설명서

6.1 전원 켜기/끄기

• To power on the printer, press the power switch located on the front panel to the 'ON' position. The power indicator light will illuminate.
• To power off the printer, press the power switch to the 'OFF' position.

6.2개의 표시등

The printer typically features indicator lights (e.g., Power, Error, Paper) to show its status:

• 파워 라이트 : 프린터 전원이 켜져 있음을 나타냅니다.
• Error Light: Illuminates or flashes to indicate an error condition (e.g., print head overheat, cutter error).
• 종이 빛: Illuminates when the paper roll is low or out.

6.3 인쇄

Once the printer is connected and drivers are installed (if necessary), you can send print jobs from your POS software or application. The printer will automatically feed the paper and cut the receipt after printing, thanks to its integrated autocutter.

6.4 자체 테스트 인쇄

A self-test print can be used to verify the printer's basic functionality and print quality without needing a computer connection. The exact procedure may vary, but typically involves holding down a feed button while powering on the printer.

7. 유지관리

7.1 용지 롤 교체

When the paper indicator light illuminates or printing becomes faint, it's time to replace the paper roll. Follow the steps in Section 5.3 to load a new 80mm thermal paper roll.

7.2 프린트 헤드 청소

Regular cleaning of the thermal print head helps maintain print quality and extends the printer's lifespan.

1. 프린터 전원을 끄고 전원 케이블을 분리하세요.
2. 상단 덮개를 엽니다.
3. Wait for the print head to cool down if the printer has been recently used.
4. 면봉으로 열전사 프린트 헤드를 부드럽게 닦아주세요.amp이소프로필 알코올로 소독함.
5. 덮개를 닫고 프린터의 전원을 켜기 전에 프린트 헤드가 완전히 마르도록 하세요.

8. 문제 해결

If you encounter issues with your Xprinter Q200, refer to the following common problems and solutions:

• 전원 없음: Ensure the power cable is securely connected to the printer and the power outlet. Check the power switch position.
• No Print: Verify that the paper roll is loaded correctly and not empty. Check the data cable connection (USB/LAN/Serial). Ensure the printer driver is installed and selected as the default printer on your computer.
• 용지 걸림: Turn off the printer, open the top cover, and carefully remove any jammed paper. Close the cover and restart.
• 인쇄 품질 불량: Clean the thermal print head as described in Section 7.2. Ensure you are using high-quality thermal paper. Adjust print density via DIP switch SW-3 if necessary.
• Error Light On/Flashing: Refer to the printer's specific error codes (if available in a separate technical manual) or try powering the printer off and on again. If the issue persists, contact support.

9. 사양

10. 보증 및 지원

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your vendor/reseller. You may also visit the official Xprinter website for further assistance and updated resources.