Wonlink 10x20 ft Instant Pop-Up Canopy Instruction Manual

1. 안전 정보

Please read and understand all safety information before setting up or using this canopy. Failure to follow these instructions may result in injury or damage to the product.

날씨 조건: Do not use this canopy in heavy rain, strong winds, or other severe weather conditions. This product is not designed for permanent installation and should be taken down during adverse weather to prevent damage or collapse.
정박: Always secure the canopy with the provided ground nails and ropes to prevent it from lifting or moving due to wind. Additional weights (not included) are recommended for increased stability.
집회: Assembly requires at least 2 people. Attempting to set up the canopy alone may lead to injury or damage to the frame and fabric.
정리: Ensure adequate clearance from power lines, trees, and other structures during setup and use.
화재 안전: 캐노피 원단에 화염이나 열원을 가까이 두지 마십시오. 이 원단은 내화성이 없습니다.
감독: Do not leave children or pets unattended under the canopy.

2. 패키지 내용

조립을 시작하기 전에 아래 나열된 모든 구성품이 패키지에 포함되어 있는지 확인하십시오.

1 x Steel Frame Stand (Pre-assembled)
1 x Top Cover (210D Oxford Fabric)
4 x Side Walls (with transparent windows)
바퀴 달린 휴대용 가방 1개
6 x 로프
12 x 접지못

Image showing all components included in the Wonlink 10x20 ft Instant Pop-Up Canopy package: steel frame, top cover, side walls, wheeled bag, ropes, and ground nails.

그림 2.1: 패키지에 포함된 모든 구성품.

Image of a person pulling the wheeled carrying bag for the canopy.

Figure 2.2: Wheeled carrying bag for easy transport.

3. 설정 지침

Follow these steps for quick and easy setup. A minimum of 2 people is recommended for efficient and safe assembly.

Step 1: Unpack and Position Frame. Take the fully assembled steel frame out of the wheeled carrying bag. Place the frame in the desired setup location and partially pull it apart, ensuring all legs are on the ground.
Step 2: Attach Top Cover. Carefully place the top cover over the partially extended frame. Ensure the corners of the fabric align with the frame's corners. Secure the top cover to the frame using the hook and loop fasteners.
Step 3: Extend Legs and Adjust Height. With one person at each end, slowly pull the frame outwards until it is fully extended. Push the buttons on the 6 legs to adjust the tent to your desired height position. Ensure all legs are locked into place.
Step 4: Attach Side Walls (Optional). If desired, attach the 4 side walls to the canopy frame using the hook and loop fasteners. The side walls are detachable and can be installed or removed as needed.
5단계: 캐노피를 고정합니다. Use the provided 12 ground nails to anchor the canopy legs to the ground. Attach the 6 ropes to the canopy frame and stake them into the ground at an angle to provide additional stability.

Animated GIF showing the four steps of setting up the canopy: 1. Unfolding the frame, 2. Spreading the frame, 3. Attaching the top cover and extending legs, 4. Attaching side walls.

Figure 3.1: Visual guide for canopy setup steps.

Fully assembled Wonlink 10x20 ft canopy with all four sidewalls attached, set up in an outdoor patio area with tables and chairs inside.

Figure 3.2: The canopy fully assembled with sidewalls.

4. 사용 설명서

4.1. 높이 조절

The canopy features three adjustable height settings. To adjust the height:

Ensure the canopy is not under tension from strong winds.
Locate the push buttons on each of the 6 legs.
Simultaneously press the buttons and slide the inner leg section up or down to the desired height.
Ensure the button clicks into place, securing the leg at the chosen height. Verify all legs are set to the same height for stability.

4.2. Using Removable Side Walls

The canopy includes four removable side walls with transparent windows, offering versatility for different weather conditions and privacy needs.

설치: Attach the side walls to the canopy frame using the integrated hook and loop fasteners along the top and sides.
제거: Simply detach the hook and loop fasteners to remove the side walls. This allows for increased ventilation and an open-air feel during warmer weather.
날씨 보호: When installed, the side walls provide additional protection from sun, light rain, and wind.

Diagram showing the dimensions of the 10x20 ft canopy and its three adjustable height settings: 10.8 ft, 10.5 ft, and 10.2 ft.

Figure 4.1: Canopy dimensions and adjustable height settings.

5. 유지관리

적절한 유지관리는 캐노피의 수명을 연장합니다.

5.1. 청소

구조: Clean the top cover and side walls with mild soap and water. Do not use harsh detergents, bleach, or abrasive cleaners, as these can damage the fabric's UV coating and waterproofing. Rinse thoroughly and allow to air dry completely before storage.
액자: 강철 프레임을 광고로 닦으세요amp 먼지와 이물질을 제거하기 위해 천으로 닦아주세요. 녹이 슬지 않도록 완전히 말리세요.

5.2. 보관

Ensure all fabric components are completely dry before folding and storing to prevent mold and mildew.
Fold the top cover and side walls neatly.
설치 설명서의 반대 순서에 따라 프레임을 접으십시오.
Store all components in the wheeled carrying bag in a cool, dry place, away from direct sunlight and extreme temperatures.

Close-up image of the waterproof fabric with water droplets on its surface.

Figure 5.1: Waterproof fabric detail.

6. 문제 해결

이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.

문제	가능한 원인	해결책
Fabric tears during setup	Top cover not centered or fully spread before extending frame; excessive force during extension.	Ensure the top cover is perfectly centered and loosely draped over the frame before fully extending. Extend the frame slowly and evenly with multiple people. Avoid forcing the frame.
캐노피가 약한 바람에도 불안정합니다.	Insufficient anchoring; legs not fully locked.	Always use all provided ground nails and ropes. Ensure all leg height adjustment buttons are securely locked. Consider using additional weight bags or stakes for extra stability.
Water pooling on top cover	Improper setup or uneven ground causing sagging.	Ensure the frame is fully extended and all legs are at the same height. Set up on level ground. If pooling persists, gently push up from underneath to clear water.
Frame difficult to extend/retract	Joints are stiff or dirty; frame is bent.	Clean joints and apply a silicone-based lubricant if necessary. Ensure no parts are bent or obstructed. Always use multiple people for extension/retraction.

7. 사양

Key specifications for your Wonlink 10x20 ft Instant Pop-Up Canopy.

크기(L x W): 20피트 x 10피트(6.1mx 3.05m)
그늘진 영역: 200 평방 피트
높이 조절 가능: 10.8 ft, 10.5 ft, 10.2 ft (approx. 3.29 m, 3.20 m, 3.11 m)
프레임 소재: 합금강
Top Cover Material: 210D Oxford Premium Polyester Fabric
방수 수준: 방수
자외선 차단: Blocks 99% of UV rays
품목 무게: 74.8파운드(33.9kg)
포장된 치수: 66.14"L x 14.56"W x 8.66"H (approx. 168 cm x 37 cm x 22 cm)
색상: 하얀색

Detailed product diagram highlighting features like sturdy steel frame, 100% waterproof fabric, pull ring for easy setup, solid cross bar, sturdy leg pad with drilled holes, and 3 height positions.

Figure 7.1: Product details and key features.

Comparison image showing reinforced plastic support, 210D Oxford fabric, and enlarged metal foot on the Wonlink canopy versus weaker alternatives.

Figure 7.2: Enhanced design features for durability and stability.

8. 보증 및 지원

Your Wonlink 10x20 ft Instant Pop-Up Canopy is designed for quality and durability. For any questions or concerns, please refer to the following information:

보고: This product is eligible for a 30-day easy return policy. Please refer to your purchase platform for specific return procedures.
고객 지원: For assistance with product issues, missing parts, or general inquiries, please contact Wonlink customer service through the retailer where the product was purchased.