1. 서론
The GameMax Mirage 120mm PC Cooling Fan is designed to provide efficient cooling for computer components while offering customizable RGB lighting. This fan features a dual-ring Rainbow LED design, a hydraulic bearing for quiet operation, and a 7-blade fan structure. It is compatible with 5V addressable 3-pin Aura Sync systems, allowing for synchronized lighting effects with compatible motherboards or controllers.
이미지 1.1: 앞면 view of the GameMax Mirage fan with active Rainbow LED lighting.
2. 안전 정보
- 설치 또는 유지 보수를 하기 전에 컴퓨터 시스템의 전원이 꺼져 있고 벽면 콘센트에서 플러그가 뽑혀 있는지 확인하십시오.
- 정전기로 인한 손상을 방지하기 위해 부품을 조심스럽게 다루십시오. 정전기 방지 손목 스트랩 사용을 고려해 보세요.
- 커넥터를 억지로 끼우지 마십시오. 케이블을 연결하기 전에 방향이 올바른지 확인하십시오.
- 선풍기를 액체나 과도한 습기로부터 멀리 두십시오.
- Do not attempt to disassemble the fan unit beyond what is described in this manual.
3. 패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1 x GameMax Mirage 120mm PC Cooling Fan
- 4 x 장착 나사
Image 3.1: Retail packaging for the GameMax Mirage fan.
4. 설정 및 설치
Follow these steps to install your GameMax Mirage 120mm PC Cooling Fan:
- 시스템 준비: 컴퓨터 전원을 끄고 전원 콘센트에서 플러그를 뽑으세요. 컴퓨터 케이스를 열어 팬 장착 위치에 접근하세요.
- 팬 장착: Position the fan in your desired location (e.g., case front, rear, top, or radiator). Ensure the airflow direction is correct for your cooling setup. Use the four included mounting screws to secure the fan to the chassis or radiator. The fan features rubber pads on the corners to help reduce vibration.
- 팬 전원 연결: Locate the 3-pin power connector on the fan cable. Connect this cable to an available 3-pin fan header on your motherboard or a fan controller.
- RGB 조명 연결: Locate the 5V addressable 3-pin Aura connector on the fan cable. Connect this to a compatible 5V ARGB header on your motherboard (often labeled 'VDG' or 'ARGB') or an external RGB controller/hub. Warning: Do not connect this to a 12V RGB header, as it will damage the LEDs.
Image 4.1: The 3-pin power connector (top) and 5V addressable 3-pin Aura connector (bottom).
The fan cables are braided for improved aesthetics and durability, helping to keep your build neat and tidy.
5. 사용 설명서
Once installed, the GameMax Mirage fan operates as follows:
- 팬 속도 제어: The fan speed is controlled via the 3-pin power connector. If connected to a motherboard fan header, the speed can typically be adjusted through your motherboard's BIOS/UEFI settings or dedicated software.
- RGB 조명 제어: The Rainbow LED lighting is controlled via the 5V addressable 3-pin Aura connector.
- If connected to a compatible motherboard (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync), you can use the motherboard's software to customize lighting effects, colors, and synchronization with other ARGB components.
- If connected to an external RGB hub/controller, refer to the instructions provided with your specific hub/controller for lighting customization options.
이미지 5.1: 각도 view of the GameMax Mirage fan showcasing its dual-ring Rainbow LED lighting.
6. 유지관리
Regular maintenance helps ensure optimal performance and longevity of your cooling fan:
- 먼지 청소: Periodically inspect the fan blades and frame for dust accumulation. Use compressed air or a soft brush to gently remove dust. Ensure the fan is powered off and unplugged before cleaning.
- 케이블 검사: Occasionally check the power and RGB cables for any signs of wear or damage.
7. 문제 해결
- 팬이 회전하지 않음:
- Ensure the 3-pin power connector is securely plugged into a functional fan header on the motherboard or controller.
- Check motherboard BIOS/UEFI settings to ensure the fan header is enabled and configured correctly.
- LEDs Not Lighting Up or Incorrect Colors:
- Verify the 5V addressable 3-pin Aura connector is securely connected to a compatible 5V ARGB header (not 12V RGB).
- Ensure your motherboard's RGB software or external controller is properly installed and configured.
- If using a splitter or hub, ensure it is powered and functioning correctly.
- 과도한 소음:
- 팬 날개에 방해가 되는 케이블이나 장애물이 있는지 확인하십시오.
- Ensure the fan is securely mounted and the rubber pads are properly seated to absorb vibrations.
- Dust accumulation can cause imbalance and noise; clean the fan as described in the Maintenance section.
8. 사양
| 특징 | 사양 |
|---|---|
| 모델 | MIRAGEWHITE FINS |
| 팬 크기 | 120mm x 120mm x 25mm(0.98 x 4.72 x 4.72인치) |
| 베어링 유형 | 유압 베어링 |
| 팬 블레이드 | 7 블레이드 |
| LED 유형 | Addressable Rainbow LED (Dual-Ring) |
| 팬 전원 커넥터 | 3핀 |
| RGB 커넥터 | 5V Addressable 3-Pin Aura Connector |
| 운영 볼륨tage | 5 Volts (for RGB) / 12 Volts (for fan motor, typical for 3-pin) |
| 정격 와트tage | 3 와트 |
| 최대 회전 속도 | 1800 RPM |
| 소음 수준 | 약 25dB(A) |
| 재료 | Rubber (for vibration damp(ening) |
이미지 8.1: 뒤 view of the GameMax Mirage fan, displaying the product label with model and electrical specifications.
9. 보증 및 지원
보증 정보 및 기술 지원에 대해서는 GAMEMAX 공식 웹사이트를 참조하십시오. web사이트를 방문하거나 판매점에 문의하세요. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
