1. 서론
This instruction manual provides detailed guidance for the safe and proper installation, operation, and maintenance of your Perlegear TV Wall Mount, model PGXSF1. Please read this manual thoroughly before installation and retain it for future reference. Incorrect installation may result in product damage or personal injury.
2. 제품 오버view
The Perlegear PGXSF1 is a full-motion TV wall mount designed for flat-screen LED, LCD, and OLED televisions. It offers flexibility in viewing angles and space-saving features.
주요 특징:
- 화면 크기 호환성: Fits most 10 to 32-inch televisions.
- 중량 용량: Supports TVs up to 20 kg (44 lbs).
- VESA 호환성: 50x50mm, 75x75mm, 100x100mm.
- 움직임:
- Tilt: +5° to -15°
- 회전: +/- 90°
- 회전: 360°
- 확대: Retracts to 7.9 cm (3.1 inches) from the wall and extends up to 44 cm (17.3 inches).
- 재료: High-grade alloy steel construction.
그림 2.1: 기본 view of the Perlegear PGXSF1 TV Wall Mount.
그림 2.2: VESA mounting pattern compatibility (50x50mm, 75x75mm, 100x100mm).
그림 2.3: The mount is tested to support up to 20 kg (44 lbs).
3. 안전 정보
경고: Failure to read and follow these instructions may result in serious personal injury, property damage, or voiding of your warranty.
- Do not begin installation until you have read and understood all instructions and warnings contained in this manual.
- 설치 표면이 마운트와 텔레비전의 총 무게를 안전하게 지탱할 수 있는지 확인하십시오.
- This product is designed for installation on wood studs, solid concrete, or brick walls. 석고보드에만 부착하지 마십시오.
- Use only the hardware provided or specified by Perlegear.
- 설치 과정에 대해 궁금한 점이 있으면 자격을 갖춘 전문가에게 문의하십시오.
- 설치하는 동안 어린이와 애완동물이 접근하지 못하도록 하세요.
- 거치대가 안전하게 고정되어 있는지, 모든 고정 장치가 단단히 조여져 있는지 주기적으로 확인하십시오.
4. 패키지 내용
Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact Perlegear customer service.
- 1x TV Wall Mount Assembly (Wall Plate and Arm)
- 2x Wall / Lag Screws
- 2x Wall Screw Washers
- 2x Concrete Anchors (Rawl Plugs)
- 4x M4 Screws (16mm length)
- 4x M4 Screws (30mm length)
- 4x M6 Screws (16mm length)
- 4x M6 Screws (30mm length)
- 4x Spacers (10mm thickness)
- 8x Spacers (5mm thickness)
- 4x Silver Double Washers
- 사용 설명서
5. 설정 및 설치
안전한 설치를 위해 다음 단계를 주의 깊게 따르십시오.
5.1 설치 전 확인 사항:
- TV 호환성 확인: Ensure your TV's screen size is between 10 and 32 inches, its weight does not exceed 20 kg, and its VESA mounting pattern is 50x50mm, 75x75mm, or 100x100mm.
- 벽 유형 식별: Determine if your wall is wood stud, solid concrete, or brick. Do not install on drywall alone.
- 도구 모으기: You will need a drill, stud finder (for wood studs), level, pencil, and screwdriver.
5.2 Wall Plate Installation:
- 시추 위치를 표시하십시오: Hold the wall plate against the wall at your desired height. Use a level to ensure it is straight. Mark the two drilling points through the holes on the wall plate.
- 드릴 파일럿 홀:
- 목재 스터드용: Drill two pilot holes (e.g., 5.5mm / 7/32 inch diameter) at the marked locations to a depth of 60mm (2.36 inches).
- 콘크리트/벽돌 벽의 경우: Drill two pilot holes (e.g., 10mm / 3/8 inch diameter) at the marked locations to a depth of 60mm (2.36 inches). Insert the concrete anchors (rawl plugs) into these holes, ensuring they are flush with the wall surface.
- 벽면 플레이트 부착: Align the wall plate with the pilot holes. Insert the wall/lag screws through the wall plate and into the pilot holes (and anchors if applicable). Use the wall screw washers. Tighten the screws firmly until the wall plate is securely fastened to the wall. Do not overtighten.
5.3 Attaching TV to Mount:
- Select TV Screws and Spacers: Choose the appropriate M4 or M6 screws that fit your TV's VESA holes. The screws should be long enough to securely engage the TV's threads but not so long as to damage internal components. Use the provided spacers if your TV has an uneven back or recessed mounting holes.
- Attach Mount to TV: Carefully align the VESA plate of the mount with the mounting holes on the back of your TV. Insert the selected screws through the VESA plate (and spacers if used) and into the TV's mounting holes. Tighten securely with a screwdriver.
6. 사용 설명서
Once installed, your Perlegear PGXSF1 mount allows for various adjustments to optimize your view경험.
Adjusting the TV Position:
- 확장 및 수축: Gently pull the TV away from the wall to extend the arm, or push it towards the wall to retract it. The arm extends up to 44 cm and retracts to 7.9 cm.
- 받침: Carefully pivot the TV left or right up to +/- 90 degrees to achieve the desired horizontal viewing angle. The maximum swivel angle may vary depending on TV size and distance from the wall.
- 경사: 수직 조정 viewing angle by tilting the TV +5 degrees upwards or -15 degrees downwards. Loosen the tilt adjustment knobs (if present) slightly, adjust the angle, and then re-tighten to secure.
- 회전: The TV can be rotated 360 degrees, allowing for landscape or portrait orientation. This feature is useful for specific applications or to correct minor leveling issues after installation.
그림 6.1: Swivel the TV left or right for optimal view주고받음.
그림 6.2: Tilt the TV up or down to reduce glare or adjust view잉 높이.
그림 6.3: Rotate the TV 360 degrees for flexible orientation.
7. 유지관리
정기적인 유지 관리는 TV 벽걸이 거치대의 수명 연장과 안전한 작동을 보장합니다.
- 청소: 부드럽고 마른 천으로 마운트를 닦으세요. 연마성 세제나 용제를 사용하지 마세요.
- 정기 점검: Every few months, check all screws and bolts to ensure they are securely tightened. Re-tighten if necessary.
- 매끄럽게 하기: If the swivel or tilt mechanisms become stiff, a small amount of silicone-based lubricant (e.g., WD-40) can be applied to the moving joints. Wipe off any excess.
8. 문제 해결
이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.
Issue: Mount movement (swivel/tilt) is stiff.
해결책: The joints may be overtightened or require lubrication. Locate the nuts on the swivel and tilt mechanisms. Slightly loosen them to allow for easier movement, then re-tighten to a comfortable tension. Apply a small amount of silicone-based lubricant to the moving parts if needed.
문제: 설치 후 TV가 수평이 맞지 않습니다.
해결책: The 360-degree rotation feature allows for minor leveling adjustments. Gently rotate the TV until it is level. If the issue persists, re-check the wall plate installation with a level.
Issue: Screws do not fit my TV.
해결책: The package includes a variety of M4 and M6 screws of different lengths, along with spacers. Ensure you are using the correct diameter and length for your TV's VESA holes. If none of the provided screws fit, you may need to purchase specific screws compatible with your TV model. Consult your TV's manual for VESA screw specifications.
9. 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | PGXSF1 |
| 호환되는 화면 크기 | 10~32인치 |
| 중량 용량 | 20kg(44파운드) |
| VESA 호환성 | 50x50mm, 75x75mm, 100x100mm |
| 기울기 각도 | +5° / -15° |
| 회전 각도 | +/- 90 ° |
| 회전 | 360° |
| 벽에서 연장된 부분 | 7.9 cm (retracted) to 44 cm (extended) |
| 재료 | 합금강 |
| 색상 | 검은색 |
| 벽 유형 호환성 | Wood Stud, Solid Concrete, Brick (Do NOT mount on drywall alone) |
10. 보증 및 지원
This Perlegear TV Wall Mount PGXSF1 comes with a 10년 제조사 보증.
For technical assistance, missing parts, or warranty claims, please contact Perlegear customer support. Refer to the product packaging or the official Perlegear web최신 연락처 정보는 사이트에서 확인하세요.
Please have your model number (PGXSF1) and purchase information ready when contacting support.
