소개
Thank you for choosing the Polk Audio PSW10 10-Inch Powered Subwoofer. This manual provides comprehensive instructions to help you set up, operate, and maintain your subwoofer for optimal performance. Please read these instructions carefully before use and retain them for future reference.
상자 안에 무엇이 들어있나요?
- Polk Audio PSW10 10-Inch Powered Subwoofer
- 전원 케이블
- 사용자 설명서
- Policy Documentation
주요 특징
- 10-Inch Dynamic Balance Woofer: Equipped with a 10-inch polymer-composite dynamic-balance cone driver for deep, precise bass.
- Built-in High-Current Amp정수기: Delivers 50 watts continuous power and 100 watts dynamic power for impactful low-frequency reproduction.
- Non-Resonant Enclosure: All-MDF enclosure construction with 0.75-inch-thick baffles and internal bracing minimizes resonance for clean sound.
- 다양한 연결성: Features line- and speaker-level inputs and speaker-level outputs for easy integration with various audio systems.
- Klippel Measurement Technology: Utilizes laser-based Klippel measurement technology for improved linearity and reduced distortion.
그림 1: 전면 view of the Polk Audio PSW10 subwoofer, showcasing the 10-inch dynamic balance woofer and front-firing port for enhanced bass impact.
설정
1. 배치
Optimal subwoofer placement is crucial for sound quality. Experiment with different locations in your room to find the best balance of bass response. Generally, placing the subwoofer in a corner can enhance bass output, while placing it closer to your main speakers can improve integration. Avoid placing it directly against a wall if it causes excessive booming.
2. 연결
The PSW10 offers flexible connection options:
- Line-Level Input (RCA): Connect your receiver's subwoofer output (LFE or Sub Out) to the LFE input on the subwoofer using an RCA cable. If your receiver has left and right pre-out jacks, use both left and right line-level inputs on the subwoofer.
- 스피커 레벨 입력/출력: For receivers without a dedicated subwoofer output, connect the speaker-level outputs from your receiver to the speaker-level inputs on the subwoofer. Then, connect the speaker-level outputs from the subwoofer to your main left and right speakers.
Figure 2: Rear panel connections and controls of the Polk Audio PSW10 subwoofer.
작동 지침
Once connected, adjust the following controls on the rear panel (refer to Figure 2):
- 볼륨 조절: 서브우퍼의 전체 출력 레벨을 조절합니다. 낮은 설정에서 시작하여 베이스가 메인 스피커와 자연스럽게 어우러질 때까지 점차 높이십시오.
- 저역 통과 필터: 이 컨트롤은 서브우퍼의 최대 주파수를 설정합니다. 메인 스피커의 저주파수 성능에 맞춰 조정하십시오. 일반적으로 80Hz를 시작점으로 사용합니다.
- 위상 전환 스위치(0°/180°): Adjust this switch to achieve the best bass impact and blend with your main speakers. Listen to music or a movie scene with strong bass and switch between 0° and 180° to determine which setting provides the most coherent and impactful bass.
- 3-Way Power Switch (Auto/On/Off):
- 자동: The subwoofer will automatically turn on when it detects an audio signal and enter standby mode after a period of inactivity.
- 에: 서브우퍼는 계속 전원이 켜져 있습니다.
- 끄다: 서브우퍼의 전원이 꺼져 있습니다.
유지
To ensure the longevity and optimal performance of your Polk Audio PSW10 subwoofer, follow these maintenance guidelines:
- 청소: Use a soft, dry cloth to wipe down the cabinet. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- 놓기: 서브우퍼를 직사광선, 열원 및 과도한 습기로부터 멀리하십시오. 서브우퍼 주변에 적절한 환기가 이루어지도록 하십시오. amp과열 방지용 증폭기 패널.
- 힘: Disconnect the power cable from the wall outlet if the subwoofer will not be used for an extended period.
문제 해결
| 문제 | 가능한 해결책 |
|---|---|
| 서브우퍼에서 소리가 나지 않습니다 | Check power connection and ensure the 3-way power switch is set to 'On' or 'Auto'. Verify audio cable connections from the receiver to the subwoofer. Increase the volume control on the subwoofer. |
| 약하거나 왜곡된 저음 | Adjust the volume control and low-pass filter. Experiment with the phase toggle switch (0°/180°). Check for proper placement and ensure no obstructions are blocking the woofer or port. |
| 서브우퍼에서 윙윙거리는 소리가 납니다. | Ensure all connections are secure. Try plugging the subwoofer into a different electrical outlet. If using line-level inputs, try a ground loop isolator. |
| 서브우퍼가 자동으로 켜지지 않습니다. | Ensure the 3-way power switch is set to 'Auto'. Increase the volume output from your receiver's subwoofer channel to ensure a strong enough signal for auto-on detection. |
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델명 | PSW10 |
| 스피커 유형 | 서브우퍼 |
| 서브우퍼 직경 | 10 인치 |
| Amplifier 연속 전력 | 50 와트 |
| Amplifier Dynamic Power | 100 와트 |
| Low-Pass Crossover Frequency | 80-160Hz |
| 입력 Voltage | 120볼트(AC) |
| 제품 치수(WxHxD) | 14인치 x 14.38인치 x 16.12인치 |
| 품목 무게 | 26 파운드 |
| 연결 기술 | 유선(보조) |
| 색상 | 검은색 |
Figure 3: Dimensions of the Polk Audio PSW10 Subwoofer.
보증 및 지원
Your Polk Audio PSW10 Powered Subwoofer comes with a 한정 보증. For specific details regarding warranty coverage, terms, and conditions, please refer to the included Policy Documentation or visit the official Polk Audio website. For technical support or service inquiries, please contact Polk Audio customer service.
