1. 중요한 안전 정보
Always read and understand all safety warnings and instructions before operating the air compressor. Failure to follow these warnings may result in serious injury or property damage.
- 전기 안전: Ensure the compressor is connected to a properly grounded 120 Volt, 750 Watt (1 Horsepower) power supply. Do not operate in wet conditions.
- 압력 안전: The maximum operating pressure is 125 PSI. Do not exceed the rated pressure of any tool or accessory. The unit features a safety valve that automatically opens if pressure reaches excessive levels.
- 청력 보호: Although designed for quiet operation (65 dB), prolonged exposure to noise can cause hearing damage. Always wear appropriate hearing protection.
- 눈 보호: Always wear ANSI Z87.1 approved safety glasses with side shields when operating the compressor or using air tools.
- 움직이는 부품: 손, 머리카락, 헐렁한 옷 등을 움직이는 부품에 가까이 두지 마십시오.
- 과열 보호: The compressor is equipped with automatic overheat protection. If the motor overheats, it will shut down automatically. Allow it to cool before restarting.
2. 제품 오버view
The STEALTH SAQ-1301 is a 3-gallon, 1.0 HP, oil-free, and ultra-quiet air compressor designed for a variety of applications. Its compact and portable design makes it suitable for both indoor and outdoor use.
그림 2.1: 전면 view of the STEALTH SAQ-1301 3 Gallon Air Compressor.
주요 특징:
- 상업용 성능: Provides continuous and stable high-voltage output up to 150 PSI.
- Leading Silent Technology: Operating noise as low as 65 decibels, suitable for indoor and outdoor use.
- Easy Cold Start: Requires low amps for easier startup in cold weather.
- 휴대성 있는 디자인: Lightweight aluminum alloy body with rubber reinforced handle and bases.
- Convenient Operation Panel: Integrated LED display and intuitive control buttons for monitoring air pressure and adjusting settings.
Figure 2.2: The SAQ-1301 compressor highlighting its 3-gallon tank, 1.0 HP motor, 150 PSI max pressure, 2.5 CFM, portability, oil-free design, cold-weather start, and long-life cycle.
Figure 2.3: The compressor is suitable for a wide range of applications including roofing nailers, finishing nailers, brad nailers, flooring nailers, and general inflation tasks.
구성 요소 식별:
- 탱크 압력 게이지: Displays the pressure inside the air tank.
- 레귤레이터 노브: Adjusts the output air pressure to the tool.
- Line Out / Tool Pressure Gauge: Displays the regulated air pressure supplied to the tool.
- 퀵 커넥트 커플러: For easy hose connection.
- 배수 밸브: Located at the bottom of the tank, used to remove moisture.
- 안전 밸브: 과압을 방지하기 위해 과도한 압력을 방출합니다.
- 고무 발: Reduce vibration and enhance stability during operation.
Figure 2.4: The Air Pressure Regulator allows adjustment of the pressure inside the line to the tool being used.
Figure 2.5: The Safety Valve automatically opens to prevent excessive pressure build-up if pressure reaches the preset level.
Figure 2.6: Sturdy rubber feet are designed to reduce vibration and enhance the stability of the compressor during operation.
3. 설정 및 초기 사용
짐 풀기:
Carefully remove the compressor from its packaging. Inspect for any shipping damage. Ensure all components listed in the manual are present.
놓기:
Place the compressor on a firm, level surface. The rubber feet will help reduce vibration. Ensure adequate ventilation around the unit.
전기 연결:
Connect the power cord to a grounded 120V AC outlet. The compressor is designed for low-amp startup, making it easier to use in various conditions.
초기 침입 절차:
- With the drain valve fully open, turn on the compressor.
- Allow the compressor to run for 30 minutes with no pressure building in the tank. This helps to properly seat the motor components.
- After 30 minutes, turn off the compressor and close the drain valve. The unit is now ready for use.
4. 운영
에어 공구 연결하기:
- Ensure the compressor is off and unplugged before connecting or disconnecting air tools.
- Attach your air hose to the quick connect coupler on the compressor's control panel.
- 호스의 다른 쪽 끝에 에어 공구를 연결하세요.
Figure 4.1: The compressor easily connects to various pneumatic tools, such as a finishing nailer, for efficient operation.
공기압 조절:
- Plug in the compressor and turn it on. Allow the tank to fill to its maximum pressure (150 PSI).
- Turn the regulator knob (blue knob) to adjust the output pressure displayed on the 'TOOL' gauge. Set the pressure according to the requirements of your air tool.
- The compressor will automatically cycle on and off to maintain tank pressure between 120 PSI (cut-in) and 150 PSI (cut-out).
Video 4.1: Demonstration of the STEALTH Air Compressor's quiet operation, easy setup, and versatility with various tools. This video highlights the low voltage start and sound level comparison.
응용 프로그램:
The SAQ-1301 is versatile and can be used for:
- 에어 브러싱
- Drilling (with appropriate pneumatic drill)
- Nailing (brad, finish, roofing, flooring nailers)
- Sanding (with appropriate pneumatic sander)
- Spraying (paint sprayers)
- 타이어 공기 주입
Figure 4.2: The compressor is shown in a woodworking application, demonstrating its utility for tasks like trim installation.
Figure 4.3: The portable design and sufficient pressure make it ideal for tire inflation for vehicles and other inflatables.
5. 유지관리
Regular maintenance ensures the longevity and optimal performance of your STEALTH air compressor.
공기탱크의 공기를 빼내세요:
Moisture will accumulate in the air tank. To prevent corrosion and ensure proper operation, drain the tank daily or after each use.
- Turn off the compressor and unplug it from the power source.
- 탱크 바닥에 있는 배수 밸브 아래에 적절한 용기를 놓으십시오.
- Slowly open the drain valve to release air and moisture.
- Once all air and moisture have been expelled, close the drain valve securely.
Figure 5.1: The drain valve is used to remove moisture from the air tank after the compressor is shut off, preventing rust and maintaining air quality.
오일 프리 펌프:
This compressor features an oil-free pump, eliminating the need for oil changes and reducing overall maintenance requirements.
일반 청소:
Keep the compressor clean and free of dust and debris. Use a dry cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners.
6. 문제 해결
이 섹션에서는 에어 컴프레서 사용 중 발생할 수 있는 일반적인 문제에 대해 설명합니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 압축기가 시작되지 않거나 예기치 않게 멈춥니다. | No power; Overheat protection activated; Circuit breaker tripped. | Check power connection; Allow unit to cool down; Reset circuit breaker. |
| 압축기는 지속적으로 또는 자주 작동합니다. | Air leak in hose or fittings; Drain valve open; Excessive air tool usage. | Check all connections for leaks; Ensure drain valve is closed; Use air tools efficiently. |
| 공구의 공기압이 낮습니다. | Regulator set too low; Air leak; Compressor not building full pressure. | Adjust regulator knob; Check for leaks; Refer to 'Compressor runs continuously' solution. |
| 과도한 소음 또는 진동. | Loose components; Unit not on a stable surface. | Check and tighten any loose parts; Ensure unit is on a flat, stable surface. |
이러한 해결 방법을 시도한 후에도 문제가 지속되면 고객 지원팀에 문의하세요.
7. 사양
| 사양 | 값 |
|---|---|
| 모델 번호 | SAQ-1301 |
| 탱크 용량 | 3갤런 |
| 마력 | 1.0마력 |
| 최대 작동 압력 | 150파운드 |
| 컷인 압력 | 120파운드 |
| 컷아웃 압력 | 150파운드 |
| 공기 흐름 용량(CFM @ 90 PSI) | 2.5 퀴놀론 |
| 소음 수준 | 65데시벨 |
| 권tage | 120 볼트 |
| 왓tage | 750 와트 |
| 품목 무게 | 44 파운드 |
| 제품 크기(L x W x H) | 19인치 길이 x 18인치 너비 x 13인치 높이 |
| 재료 | 합금강 |
| 한국어: | 810941030444 |
8. 보증 및 지원
보증 정보:
The STEALTH SAQ-1301 Air Compressor comes with a Limited Lifetime Warranty. Please refer to the warranty documentation included with your product for full details and restrictions.
고객 지원:
For technical assistance, parts, or warranty claims, please contact STEALTH customer support. Keep your model number (SAQ-1301) and proof of purchase readily available when contacting support.
You can also visit the official Stealth Store for more information and product resources: Stealth Store on Amazon
