1. 서론
This manual provides essential instructions for the safe and efficient use of your Herdio 4 Inch 200 Watt Outdoor Indoor Bluetooth Speakers, Model HOS-401WBT. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your speakers.
2. 패키지 내용
아래 나열된 모든 품목이 패키지에 포함되어 있는지 확인하세요.
- 2 x Herdio 4 Inch Speakers (1 Active, 1 Passive)
- 1 x 12V Power Adapter and Supply
- 1 x 16FT/5M Speaker Cable
- 1 x 사용자 설명서
- 장착 브래킷 및 나사

3. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델명 | HOS-401WBT |
| 스피커 유형 | 야외 / 실내 |
| 전력 출력 | 200와트 (스피커당 100와트) |
| 우퍼 직경 | 4 인치 |
| 트위터 직경 | 1 인치 |
| 연결성 | Bluetooth, Wired (Passive speaker connection) |
| 블루투스 범위 | 최대 20.12미터(66피트) |
| 방수 레벨 | IP66(방수) |
| 재료 | 아크릴로니트릴 부타디엔 스티렌(ABS) |
| 제품 크기(L x W x H) | 8.62" x 5.67" x 6.62"(219mm x 144mm x 159mm) |
| 입력 Voltage | 12 볼트 |
| 오디오 출력 모드 | 스테레오 재생 |

4. 설정
4.1 스피커 장착
The Herdio speakers come with versatile swivel brackets for flexible placement. These brackets allow for a 90-120 degree range of motion, enabling you to direct sound as desired.
- 괄호 제거: Unscrew the knobs on the sides of the speakers to detach the mounting brackets.
- 표시 위치: Choose your desired location (e.g., patio, garage, living room wall). Use the detached bracket to mark the drill points for the screws.
- 브라켓 설치: Securely attach the brackets to the wall or ceiling using appropriate screws (provided).
- 스피커를 연결하세요: Slide the speakers onto the installed brackets. Adjust the speaker angle and tighten the knobs to secure them in place.

4.2 스피커 배선
The Herdio speaker system consists of one active speaker and one passive speaker. The active speaker contains the amplifier and Bluetooth module, while the passive speaker connects to the active one via the provided speaker cable.
- Connect Passive to Active: Locate the red (+) and black (-) terminals on the back of both speakers. Connect the red wire of the speaker cable to the red terminal on both speakers, and the black wire to the black terminal on both speakers. Ensure a secure connection by turning the terminal clockwise to tighten.
- 전원 연결: Plug the 12V power adapter into the DC 12V input port on the active speaker. Then, plug the power adapter into a suitable electrical outlet.

5. 운영
5.1 블루투스 페어링
Once powered on, the active speaker will automatically enter Bluetooth pairing mode. The Bluetooth indicator light will flash, indicating it's ready to connect.
- 블루투스 활성화: 스마트폰이나 태블릿에서 Bluetooth를 활성화하세요.
- 검색 장치: Look for "HOS-401WBT" in the list of available Bluetooth devices.
- 연결하다: Select "HOS-401WBT" to pair. A confirmation tone will sound from the speakers once successfully connected.

5.2 오디오 재생
After successful pairing, you can play audio from your connected device. The speakers will output stereo sound.
- 볼륨 조절: 연결된 기기에서 직접 볼륨을 조절하세요.
- 사운드 품질: The speakers are designed to deliver full-range sound with deep bass and clear highs.
6. 유지관리
- 청소: 스피커 표면은 부드럽고 마른 천으로 닦으십시오. 연마성 세척제나 용제는 사용하지 마십시오.
- 날씨 보호: Although IP66 rated, it is recommended to protect the power adapter from direct exposure to rain or extreme weather conditions.
- 저장: 스피커를 장기간 보관할 경우 전원을 끄고 서늘하고 건조한 곳에 보관하세요.

7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원이 없습니다 | 전원 어댑터가 연결되지 않았거나 콘센트에 결함이 있습니다. | Ensure the power adapter is securely plugged into the active speaker and a working electrical outlet. |
| 소리가 나지 않습니다 | Speakers not paired, volume too low, or incorrect wiring. | Verify Bluetooth connection, increase device volume, and check speaker cable connections between active and passive speakers. |
| 블루투스 연결 해제 | 기기가 범위를 벗어났거나 간섭이 발생했습니다. | Ensure the paired device is within 20 meters (66 feet) of the active speaker. Minimize obstacles and interference. |
| 왜곡된 소리 | Volume too high or poor audio source. | Reduce the volume on your device. Try a different audio source or file. |
8. 보증 및 지원
All Herdio speaker products come with a 1년 한정 보증 against defects in materials and workmanship. Proof of purchase is required for all claims.
During the warranty period, Herdio will replace any defective part and correct any defect in workmanship without charge for either parts or labor.
The Technical Support Center at HERDIO is available from Monday to Friday, excluding holidays.
문의사항이나 도움이 필요하시면 다음 연락처로 문의해 주세요: support@herdiotech.com





