1. 서론
The HENDI Automatic Water Softener, Model 230459, is an advanced system designed for commercial use to effectively prevent limescale buildup in plumbing installations. This unit operates at 230V and 18W, ensuring efficient and reliable water treatment. By reducing mineral deposits, it helps extend the lifespan of your appliances and maintain optimal water flow.
그림 1: 전면 view of the HENDI Automatic Water Softener, Model 230459.
2. 안전 정보
This is a commercial product not intended for domestic use.
Always adhere to local regulations and safety standards during installation, operation, and maintenance. Disconnect power before performing any service or maintenance. Ensure proper grounding to prevent electrical hazards. Keep the unit away from direct sunlight and extreme temperatures.
3. 제품 특징
- 작동 압력: 1.5 - 6.0 바
- 주변 작동 온도: 5~38도
- Output for 10°dH: 1200리터
- 제어판: Allows configuration of operating time, regeneration time, and treated water quantity.
- 자동 잠금 : Prevents unauthorized access to settings.
- 아동 잠금: Special function to prevent accidental changes.
4. 설정 및 설치
The HENDI Automatic Water Softener is designed for installation on the main water line. It should be installed before the water line splits to the water heater or other plumbing fixtures to ensure all water entering the system is treated.
- 위치 선택: Choose a dry, level area with adequate space for installation and future access. Ensure the ambient temperature remains within 5 – 38 °C.
- 급수 연결: Connect the unit to the main water supply line. Ensure all connections are secure and leak-free.
- 드레인 연결: Connect the drain line according to local plumbing codes.
- 전기 연결: Connect the unit to a grounded 230V electrical outlet.
- 초기 시작: Follow the operating instructions to initiate the first regeneration cycle and configure settings.
Note on Iron Content: If your source water has iron levels exceeding 0.3 ppm, it is recommended to use an iron removal filter before the water softener to ensure optimal performance and longevity of the unit.
5. 사용 설명서
The unit features an intuitive control panel for managing its functions. Refer to the display and buttons for configuration.
Figure 2: Close-up of the control panel with display and buttons.
- Setting Operating Time: Use the control panel to set the desired operating schedule for the unit.
- Configuring Regeneration Time: Adjust the regeneration cycle frequency and duration based on your water hardness and usage.
- Adjusting Treated Water Quantity: Set the volume of water to be treated before a regeneration cycle is initiated.
- 자동 잠금 : The system includes an automatic lock feature to prevent unintended changes to the settings. Consult the on-screen prompts for activation/deactivation.
- 아동 잠금: Activate the child lock function through the control panel to secure settings from accidental tamp에링.
6. 유지관리
The HENDI Automatic Water Softener Model 230459 is designed for minimal maintenance after initial setup. Regular checks are recommended to ensure optimal performance.
- 정기 검사: Visually inspect the unit and connections for any signs of leaks or damage.
- 청소: 기기 외부를 깨끗하게 유지하고 먼지와 이물질이 없도록 하십시오. 부드러운 천을 사용하십시오.amp 청소용 천을 사용하십시오. 연마성 세제는 사용하지 마십시오.
- 염도: This unit operates using an ion exchange method, which typically requires salt for regeneration. Ensure the salt reservoir is adequately filled. Refer to the control panel for indicators and specific instructions on salt replenishment.
7. 문제 해결
If you encounter issues with your HENDI Automatic Water Softener, please refer to the following common troubleshooting steps:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원이 켜지지 않습니다 | 전원 공급 없음; 연결이 느슨함 | Check power cable and outlet. Ensure unit is properly plugged in. |
| Water still hard | Incorrect settings; low salt level; high iron content; unit malfunction | Verify control panel settings. Check and refill salt reservoir. Test water for iron levels and consider a pre-filter if needed. Contact support if problem persists. |
| 디스플레이의 오류 메시지 | Internal fault; sensor issue | 오류 코드를 기록해 두시고 전체 제품 설명서를 참조하거나 고객 지원팀에 문의하십시오. |
For issues not listed here, or if solutions do not resolve the problem, please contact HENDI customer support.
8. 사양
| 기인하다 | 세부 사항 |
|---|---|
| 제조업체 | 헨디 |
| 모델 번호 | 230459 |
| 제품 치수 | 56 x 42 x 24.5cm(22 x 16.5 x 9.6인치) |
| 무게 | 9.94kg(21.9파운드) |
| 권tage | 230 볼트 |
| 전력 소비 | 18 와트 |
| 작동 압력 | 1.5 - 6.0 바 |
| 주변 작동 온도 | 5~38도 |
| 유량 | 분당 5리터 |
| Capacity (10°dH) | 1200리터 |
| 재료 | 세라믹 |
| 설치 방법 | 독립형 |
| 정화 방법 | 이온 교환 |
| 특별 기능 | 아동 잠금 |
9. 보증 정보
HENDI products are manufactured to high-quality standards. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official HENDI web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
10. 지원
For technical assistance, spare parts, or further inquiries regarding your HENDI Automatic Water Softener, please contact HENDI customer service. Contact details can be found on the HENDI web사이트 또는 제품과 함께 제공된 설명서를 참조하세요.
헨디 Web대지: www.hendi.eu
