소개
This manual provides detailed instructions for the proper installation, operation, and maintenance of your NORDRIVE N21420 Snap Bar Fixing Kit. Please read this manual thoroughly before installation and retain it for future reference. Correct installation is crucial for safety and product performance.
안전 정보
설치 및 사용 시에는 항상 안전을 최우선으로 고려하십시오. 이 지침을 따르지 않을 경우 재산 피해 또는 인명 피해가 발생할 수 있습니다.
- 운전하기 전에 모든 부품이 단단히 고정되었는지 확인하십시오.
- Do not exceed the maximum load capacity specified for your vehicle's roof or the roof bars.
- 모든 볼트와 연결부의 조임 상태를 정기적으로 점검하십시오. 특히 주행 후 처음 몇 킬로미터를 점검한 후와 그 이후에도 주기적으로 점검하는 것이 좋습니다.
- 설치 과정 중 확실하지 않은 부분이 있으면 자격을 갖춘 전문가에게 문의하십시오.
패키지 내용
패키지에 다음 구성 요소가 모두 포함되어 있는지 확인하십시오.
- Snap Bar Fixing Brackets (Quantity: 4, as typically supplied for a set of roof bars)
- Associated Fasteners (Bolts, washers, nuts - specific quantities may vary by kit)
- Rubber/Plastic Protection Pads (If included)
- Instruction Leaflet (This document)
그림 1: 이상view of NORDRIVE N21420 Snap Bar Fixing Kit components. Each set includes a metal bracket and a black plastic base designed for securing roof bars.
설정 및 설치
Follow these steps carefully to install the NORDRIVE N21420 Snap Bar Fixing Kit onto your vehicle's roof bars.
- 구성 요소 식별: Separate the metal brackets from the plastic bases. Ensure you have all necessary fasteners.
- 지붕 바를 준비하세요: Position your roof bars on the vehicle's roof according to your vehicle manufacturer's guidelines. Ensure they are correctly spaced and aligned.
- Attach Plastic Base: Secure the black plastic base component of the fixing kit to the underside of your roof bar. This typically involves sliding it into a channel or clamping it around the bar. Refer to your specific roof bar manual for attachment methods.
- Position Metal Bracket: Place the metal bracket over the plastic base and the roof bar. The bracket is designed to clamp onto the vehicle's designated roof mounting points or the roof bar itself.
- 보안 패스너: Insert the provided bolts through the metal bracket and into the plastic base or directly into the roof bar/vehicle mounting point. Tighten all bolts evenly using appropriate tools until secure. Do not overtighten.
- 모든 대진표에 대해 이 과정을 반복하십시오. Install the remaining fixing kits on all four corners of your roof bar system.
- 최종 확인: After installation, gently shake the roof bars to ensure they are firmly attached and do not move. Double-check the tightness of all fasteners.
Note: Specific installation details may vary slightly depending on the design of your roof bars and vehicle. Always refer to your vehicle's owner's manual and the roof bar instructions for precise mounting points and load limits.
작동 지침
Once the NORDRIVE N21420 Snap Bar Fixing Kit is correctly installed, your roof bars are ready for use. This kit primarily serves as the secure attachment point for your roof bars to your vehicle.
- 하중 분배: When loading items onto your roof bars, distribute the weight evenly to maintain vehicle stability.
- 안전한 화물: Always use appropriate straps or cargo carriers to secure your load to the roof bars.
- Check Periodically: During long journeys, stop periodically to check that your cargo and roof bars remain securely fastened.
- 운전 조정: Be aware that carrying loads on your roof can affect your vehicle's handling, braking, and fuel consumption. Adjust your driving style accordingly.
유지
Regular maintenance ensures the longevity and safe operation of your fixing kit.
- 청소: Clean the components with mild soap and water. Avoid harsh chemicals that could damage the finish or materials.
- 점검: Periodically inspect all components for signs of wear, corrosion, or damage. Pay close attention to bolts, brackets, and plastic parts.
- 견고성 확인: Re-tighten all fasteners as needed, especially after heavy use or exposure to vibrations.
- 저장: If removing the roof bars and fixing kit for storage, clean them thoroughly and store them in a dry place away from direct sunlight.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 루프 바를 설치한 후 헐거워진 느낌이 듭니다. | Fasteners not tightened sufficiently. Incorrect component assembly. | Re-check all fasteners and tighten them firmly. Review 올바른 조립을 위한 설치 단계. |
| Unusual noise from roof bars while driving. | Loose components. Improperly secured cargo. | Inspect all fixing kit components and cargo for tightness. Ensure no parts are vibrating against each other. |
| Difficulty attaching the kit to roof bars/vehicle. | Incompatibility with vehicle or roof bars. Incorrect orientation of components. | Verify that the N21420 kit is compatible with your specific vehicle and roof bar model. Ensure components are oriented as shown in the instructions. |
명세서
- 모델: 노드리브 N21420
- 제품 유형: Snap Bar Fixing Kit / Bracket Kit 'K10'
- 재료: Metal (Brackets), Plastic (Bases)
- 제조업체: LAMPA
- 품목 무게: Approximately 450 g (0.45 Kilograms)
- 패키지 크기: 17.3 x 10.7 x 7.3cm
- 호환성: Designed for specific roof bars and vehicle mounting points (refer to NORDRIVE compatibility guide).
보증 및 지원
For warranty information, please refer to the documentation provided at the time of purchase or visit the official NORDRIVE website. For technical support or inquiries regarding replacement parts, please contact your retailer or NORDRIVE customer service.
보증 청구를 위해 구매 증빙 서류를 보관하세요.
