Bars BARSH1S1L91

바 H1S1L-27 헤드 개스킷 누출 방지제 600ml 사용 설명서

상표: Bars | 모델: BARSH1S1L91

1. 제품 오버view

The Bars Head Gasket Sealant and Repair Additive is designed to address leaks in engine cooling systems, specifically targeting blown or damaged cylinder head gaskets. This 600ml formula contains a combination of anti-freeze sodium silicate (liquid glass) and various sized sealing particles. These components work to penetrate gaps and crevices in the engine block and cooling system near the combustion chamber, forming a seal.

This product is intended for use in vehicles that do not exhibit severe overheating or require frequent coolant top-ups after short periods of engine operation (15-30 minutes).

Bars Head Gasket Stop Leak & Block Repair bottle

이미지 1.1: Bars Head Gasket Stop Leak & Block Repair 600ml bottle. This image displays the front label of the product, highlighting its primary function as a head gasket and block repair solution.

2. 안전 정보

  • 주의: Always exercise extreme caution when working near an engine. Engine components can reach high temperatures and cause severe burns.
  • 통풍: 밀폐된 공간에서 작업할 때는 적절한 환기를 확보하십시오.
  • 눈과 피부 보호: Wear appropriate eye protection and gloves to prevent contact with the product. In case of contact, rinse thoroughly with water.
  • 음식물 섭취: 삼키지 마십시오. 삼켰을 경우 즉시 의사의 진료를 받으십시오.
  • 저장: Keep out of reach of children and pets. Store in a cool, dry place.
  • 호환성: This product is not suitable for cooling systems with a capacity of 3 liters or less.

3. 준비 및 적용

  1. 엔진 상태: Ensure the engine is cool before beginning the application process.
  2. 잘 흔들어주세요: Shake the entire bottle of Bars Head Gasket Sealant thoroughly before use to ensure proper mixing of components.
  3. 냉각수 레벨 점검: Check the current coolant level. If the cooling system is already full, it may be necessary to drain a small amount of existing coolant to accommodate the entire 600ml bottle of product.
  4. 제품 추가: Add the entire contents of the bottle directly into the vehicle's radiator. If direct access to the radiator is not possible, the product can be added via the radiator hose or the pressurized overflow tank.
  5. 투여량: One 600ml bottle treats up to 10 liters of coolant. Ensure the entire bottle is used for optimal results.
Back of Bars Head Gasket Stop Leak bottle with multi-language instructions

이미지 3.1: Back of Bars Head Gasket Stop Leak bottle. This image shows the detailed instructions and warnings printed on the back label, including multi-language information.

4. 사용 설명서

  1. Initial Engine Run: Start the engine and allow it to run until it reaches its normal operating temperature.
  2. 쿨다운: Once normal operating temperature is reached, switch off the vehicle and allow the engine to cool down completely.
  3. High Idle Run: Restart the vehicle and run the engine at a high idle for approximately 15 minutes. This helps circulate the product and facilitate the sealing process.
  4. Final Cool Down & Top-Up: Turn the vehicle off again and allow it to cool down. After cooling, check the coolant level and top up the radiator with appropriate coolant if necessary.

5. Maintenance and Ongoing Protection

When used correctly, Bars Head Gasket Sealant provides continuous protection against small leaks in the cylinder head gasket and engine block. Regular checks of your coolant level and system integrity are always recommended as part of routine vehicle maintenance.

6. 문제 해결

This product is most effective for small leaks and early symptoms of head gasket failure. It is recommended for vehicles that do not overheat or require a coolant fill after idling the engine for 15-30 minutes. If your vehicle exhibits severe overheating, significant coolant loss, or other major mechanical issues, this product may not be sufficient, and professional mechanical inspection is advised.

7. 제품 사양

기인하다세부 사항
상표
모델 번호BARSH1S1L91
제조업체 부품 번호1830976
용량600ml
재료Glass (referring to the active ingredient, sodium silicate)
품목 무게1.35파운드
제품 치수2.28 x 3.7 x 7.17 인치
호환성Compatible with all anti-freeze types. Not suitable for cooling systems under 3 liters.

8. 보증 및 지원

For product support, technical assistance, or warranty inquiries, please refer to the official Bars web해당 웹사이트를 방문하거나 고객 서비스 센터에 직접 문의하십시오. 구체적인 보증 내용은 지역 및 판매점에 따라 다를 수 있습니다.

제조업체:

Web대지: www.barsgroup.com

관련 문서 - BARSH1S1L91

사전view iBoard 러닝보드 설치 가이드 - APS
차량용 APS iBoard 러닝 보드(스텝 바)의 단계별 설치 설명서(부품 목록 및 하드웨어 세부 정보 포함). 모델 IB-010C&H.
사전view MaxMate 3.5인치 스텝 바 설치 가이드 - SS2N35208MX
MaxMate 3.5인치 스텝 바(모델 SS2N35208MX)에 대한 종합 설치 안내서입니다. 부품 목록, 토크 사양, 그리고 닛산 프론티어와 같은 차량에 장착하기 위한 자세한 단계별 지침이 포함되어 있습니다. 적절한 장착과 안전한 설치를 보장하십시오.
사전view iBoard 러닝보드 설치 가이드 - IB-054C&H
APS iBoard 러닝보드(모델 IB-054C&H) 공식 설치 설명서입니다. 차량 장착을 위한 자세한 단계별 지침, 부품 목록 및 패스너 사양을 제공합니다.
사전view MaxMate 3.5인치 스텝 바 설치 가이드(SS2D35098MX)
MaxMate 3.5인치 스텝 바(모델 SS2D35098MX)에 대한 단계별 설치 지침에는 부품 목록, 토크 값, Ram 1500에 대한 장착 절차가 포함되어 있습니다.
사전view Jaguar F-PACE 크로스바 장착 지침 - 설치 가이드
재규어 F-PACE 크로스바(부품 번호 T4A6946)에 대한 자세한 장착 설명서입니다. F-PACE 차량에 루프랙 크로스바를 안전하게 설치, 제거 및 재장착하는 방법을 알아보세요.
사전view iArmor IA-S044 로커 패널 마운트 설치 가이드
APS iArmor IA-S044 로커 패널 마운트의 자세한 설치 설명서입니다. 부품 목록, 토크 사양 및 단계별 설치 안내가 포함되어 있으며, 2004-2008년형 포드 F-150 슈퍼크루 캡 모델에 적용 가능합니다.