1. 서론
1.1 About Your Antec DA601 Case
The Antec Dark Avenger DA601 is an E-ATX mid-tower PC case designed for high-performance gaming systems. It features an ARGB front panel with integrated LED strips, a tempered glass side panel for showcasing internal components, and includes a Prizm 120 ARGB fan for enhanced cooling and aesthetics. This manual provides comprehensive instructions for the assembly, operation, and maintenance of your DA601 case, ensuring optimal performance and longevity.
2. 제품 오버view
2.1 주요 특징
- ARGB Front Panel: Features 4 LED strips on the front panel, easily controlled by a single button or motherboard synchronization.
- Pre-Installed ARGB Fan: Includes one Prizm 120 ARGB fan for improved thermal performance and customizable lighting.
- 전체 화면 View: A crystal-clear tempered glass side panel allows for a complete view PC 내부 구성 요소의 일부입니다.
- High Water-Cooling Capability: 로 디자인됨 ample space to support both All-In-One (AIO) and custom liquid cooling configurations.
- Inbuilt LED Controller: Connects to a 3-pin header on the motherboard for 16.8 million custom color options and synchronization.
2.2 Component Layout and Compatibility
Familiarize yourself with the internal layout and component compatibility of the Antec DA601 case before beginning assembly.
그림 2.1: 앞 왼쪽 view of the Antec Dark Avenger DA601 E-ATX Mid Tower Case, showcasing the ARGB front panel and tempered glass side panel.
그림 2.2: 상단 전면 view of the Antec Dark Avenger DA601 E-ATX Mid Tower Case, highlighting the top ventilation and front panel I/O ports.
Figure 2.3: Diagram illustrating the internal component layout and compatibility of the Antec DA601 case, including motherboard, GPU, CPU cooler, PSU, and storage drive locations.
3. 설정 지침
Follow these steps to assemble your PC components within the Antec DA601 case.
3.1 사건 준비
- 케이스를 안정적이고 평평한 표면에 놓으세요.
- Carefully remove the tempered glass side panel by unscrewing the thumb screws and gently pulling it away. Set it aside on a soft, protected surface.
- Remove the opposite metal side panel to access the cable management area.
3.2 마더 보드 설치
- Install the necessary motherboard standoffs into the motherboard tray according to your motherboard's form factor (E-ATX, ATX, Micro-ATX, ITX).
- I/O 쉴드를 케이스 후면 개구부에 넣으십시오.
- Carefully align your motherboard with the standoffs and I/O shield, then secure it with screws.
3.3 전원 공급 장치(PSU) 설치
- Mount your PSU into the designated bay at the bottom rear of the case.
- 케이스 뒷면에서 나사로 PSU를 고정합니다.
3.4 저장 드라이브 설치
- 2.5인치 SSD: Mount SSDs onto the dedicated SSD trays located behind the motherboard tray. Secure them with screws.
- 3.5인치 HDD: Install HDDs into the removable drive cages located in the PSU shroud area. Slide them into place and secure with screws or tool-less mechanisms if available.
3.5 그래픽 카드 및 확장 카드 설치
- 케이스 뒷면에서 필요한 PCIe 슬롯 커버를 제거합니다.
- 그래픽 카드 또는 기타 확장 카드를 마더보드의 해당 PCIe 슬롯에 장착하십시오.
- 카드를 나사로 고정합니다.
3.6 케이블 관리
Utilize the cable routing grommets and tie-down points behind the motherboard tray to organize and secure cables. This improves airflow and aesthetics.
3.7 전면 패널 I/O 연결
Connect the front panel cables (USB, audio, power switch, reset switch, power LED, HDD LED, ARGB headers) to their corresponding pins on your motherboard. Refer to your motherboard manual for exact pin locations.
4. 사용 설명서
4.1 전원 켜기
After all components are installed and cables are connected, ensure the PSU switch is in the 'ON' position. Press the power button on the top panel of the case to start your system.
4.2 ARGB 조명 제어
The Antec DA601 features addressable RGB (ARGB) lighting on the front panel and includes an ARGB fan. You can control these lights in two ways:
- 전면 패널 버튼: Press the dedicated LED control button on the top panel of the case to cycle through various lighting modes and colors.
- 메인보드 동기화: If your motherboard supports ARGB (5V 3-pin header), connect the case's ARGB cable to the motherboard. You can then control the lighting effects using your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
Video 4.1: Official Antec video demonstrating the ARGB lighting features and various color modes of the Dark Avenger DA601 PC case, including synchronization capabilities.
5. 유지관리
정기적인 유지 관리는 최적의 성능을 보장하고 PC 부품의 수명을 연장하는 데 도움이 됩니다.
5.1 청소
- 먼지 필터: Periodically remove and clean the magnetic dust filters located on the top, front, and bottom of the case. Use compressed air or a soft brush to remove accumulated dust.
- 내부: With the system powered off and unplugged, use compressed air to gently remove dust from internal components such as fans, heatsinks, and circuit boards.
- 외부: 부드러운 d로 외부 표면을 닦으십시오.amp 천으로 닦으세요. 연마성 세제나 용제는 사용하지 마세요.
5.2 공기 흐름 최적화
Ensure that the case's ventilation areas are not obstructed. Proper cable management contributes to better airflow, preventing heat buildup inside the case.
6. 문제 해결
이 섹션에서는 일반적으로 발생할 수 있는 문제에 대해 설명합니다.
6.1 전원 없음
- 전원 케이블이 파워서플라이와 벽면 콘센트에 제대로 연결되어 있는지 확인하십시오.
- 파워서플라이의 전원 스위치가 '켜짐' 위치에 있는지 확인하십시오.
- 전면 패널 전원 스위치 케이블이 마더보드의 전원 헤더에 올바르게 연결되어 있는지 확인하십시오.
6.2 팬이 회전하지 않음
- Confirm that all fan power cables are securely connected to the motherboard or a fan controller.
- BIOS/UEFI 설정에서 팬 제어가 활성화되어 있고 올바르게 구성되어 있는지 확인하십시오.
6.3 ARGB 조명이 작동하지 않습니다
- Ensure the ARGB cables from the front panel and fan are correctly connected to the case's inbuilt LED controller or directly to a 5V 3-pin ARGB header on your motherboard.
- If using motherboard sync, verify that your motherboard's RGB software is installed and configured correctly.
- Try cycling through modes using the front panel LED button to rule out software issues.
6.4 과열 문제
- Ensure all case fans are spinning and oriented correctly for optimal airflow (intake/exhaust).
- 유지관리 섹션에 설명된 대로 먼지 필터와 내부 구성품을 청소하세요.
- CPU 쿨러와 GPU 팬이 제대로 작동하는지 확인하십시오.
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 안텍 |
| 시리즈 | DA601 |
| 모델명 | DA601 |
| 케이스 유형 | 미드 타워 |
| 마더보드 호환성 | E-ATX (up to 12" x 11"), ATX, Micro-ATX, ITX |
| 색상 | 검은색 |
| 재료 | 합금강, 플라스틱 |
| 제품 크기(LxWxH) | 8.66 x 18.9 x 19.69인치(220 x 480 x 500mm) |
| 품목 무게 | 17.2파운드(7.8kg) |
| USB 2.0 포트 수 | 2 |
| 그래픽 카드 지원 | 최대 400mm |
| CPU 쿨러 지원 | 최대 160mm |
| PSU 지원 | 최대 200mm |
| 냉각 방식 | 공기 |
| 사전 설치된 팬 | 1 x Prizm 120 ARGB Fan |
8. 보증 정보
Antec provides a limited warranty for the Dark Avenger DA601 E-ATX Mid Tower Case. The specific terms and duration of the warranty may vary by region and retailer. Please retain your proof of purchase (receipt or invoice) as it will be required for any warranty claims. For detailed warranty information, including coverage, limitations, and the claims process, please visit the official Antec website or contact your local Antec distributor.
9. 지원
Should you require technical assistance, have questions about your product, or need customer service, please utilize the following resources:
- 공식 Antec Web대지: 방문하다 www.antec.com 제품 정보, FAQ, 지원 연락처 정보를 확인하세요.
- 고객 서비스: Refer to the 'Contact Us' section on the Antec website for regional customer support phone numbers or email addresses.
