8Bitdo M30 블루투스 컨트롤러 사용 설명서

1. 서론

The 8Bitdo M30 Bluetooth Controller is a redefined 6-button gamepad designed to bring classic gaming experiences to modern platforms. With its versatile connectivity and familiar layout, it is ideal for SEGA's classic games and a wide range of other titles across multiple systems.

그림 1: 전면 view of the 8Bitdo M30 Bluetooth Controller.

2. 주요 특징

• Wireless connectivity with a classic 6-button layout.
• Multi-platform compatibility: Nintendo Switch, Windows 10 or above, Android, and Raspberry Pi.
• Built-in Turbo Function (Note: This feature is unavailable on Nintendo Switch).
• Integrated Bluetooth for wireless play and a rechargeable battery for convenience.
• Upgradeable firmware to ensure ongoing compatibility and performance enhancements.

3. 설정 및 연결

3.1. 초기 충전

Before first use, fully charge the controller. The 8Bitdo M30 features a built-in 480 mAh Li-on battery, providing approximately 18 hours of play time on a full charge. Charging typically takes 1-2 hours via the USB-C cable.

• 배터리 상태 표시기:
• Low Battery Mode: Red LED blinks.
• Battery Charging: Red LED stays solid.
• Battery Fully Charged: LED turns off.

3.2. 블루투스 페어링 지침

The M30 controller supports various input modes for different platforms. Follow the steps below for your specific device:

• 닌텐도 스위치 모드:
  1. 누르고 있으세요 Y + 시작 to turn on the controller. LEDs 1 & 2 will blink.
  2. On your Switch Home Page, navigate to 'Controllers' then 'Change Grip/Order'.
  3. The LEDs on the controller will pause for 1 second when the connection is successful.
  4. The controller will automatically reconnect to your Switch with the press of the Start button once it has been paired.
• Windows (X-Input) Mode:
  1. 누르고 있으세요 X + 시작 to turn on the controller. LEDs 1 & 4 will blink.
  2. On your Windows device, go to 'Bluetooth & other devices' settings and pair with '[8Bitdo M30 gamepad]'.
  3. The LEDs on the controller will pause for 1 second when the connection is successful.
  4. The controller will automatically reconnect to your Windows device with the press of the Start button once it has been paired.
• Android (D-Input) Mode:
  1. 누르고 있으세요 B + 시작 to turn on the controller. LEDs 1 & 3 will blink.
  2. On your Android device, go to 'Bluetooth settings' and pair with '[8Bitdo M30 gamepad]'.
  3. The LEDs on the controller will pause for 1 second when the connection is successful.
  4. The controller will automatically reconnect to your Android device with the press of the Start button once it has been paired.
• macOS 모드:
  1. 누르고 있으세요 A + 시작 to turn on the controller. LEDs 1 & 2 will blink.
  2. On your macOS device, go to 'Bluetooth settings' and pair with '[8Bitdo M30 gamepad]'.
  3. The LEDs on the controller will pause for 1 second when the connection is successful.
  4. The controller will automatically reconnect to your macOS device with the press of the Start button once it has been paired.

그림 2: 상단 view of the 8Bitdo M30 controller, highlighting the button layout.

4. 컨트롤러 작동

4.1. 버튼 기능

The 8Bitdo M30 features a classic 6-button layout (A, B, C, X, Y, Z) on the face, along with L and R shoulder buttons. The D-pad provides precise directional control.

4.2. 터보 기능

To activate or deactivate Turbo functionality for a specific button:

1. Hold down the button you wish to apply Turbo to.
2. 버튼을 누른 상태에서 별 단추.
3. The Turbo function will now be active for that button. Repeat the process to deactivate.

Note: Turbo Function is not available when using the controller in Nintendo Switch mode.

4.3. 절전 모드

The controller is designed with power-saving features to extend battery life:

• Sleep Mode (No Bluetooth Connection): The controller will enter sleep mode after 1 minute if there is no active Bluetooth connection.
• Sleep Mode (Bluetooth Connected, No Use): The controller will enter sleep mode after 15 minutes of inactivity while connected via Bluetooth.
• Waking Up the Controller: 를 누르세요 시작 button to wake up your controller from sleep mode.
• 유선 연결: The controller remains on and connected when plugged in via a wired USB connection.

5. 유지관리

5.1. 청소

To clean your 8Bitdo M30 controller, use a soft, dry cloth. Avoid using harsh chemicals or abrasive materials, as these may damage the surface or internal components.

5.2. 배터리 관리

To prolong the life of your controller's battery:

• Avoid exposing the controller to extreme temperatures (hot or cold).
• 사용하지 않을 때는 컨트롤러를 서늘하고 건조한 곳에 보관하십시오.
• 장기간 보관할 경우 배터리가 부분적으로 충전되어 있는지(약 50%) 확인하여 심하게 방전되는 것을 방지하세요.

6. 문제 해결

6.1. 연결 문제

• Ensure the controller is in the correct mode for your platform (Switch, X-Input, D-Input, macOS).
• Verify that Bluetooth is enabled on your device and the controller is within range.
• 사용 중인 플랫폼에 맞는 설정 지침에 따라 컨트롤러를 다시 페어링해 보세요.
• Check the battery indicator to ensure the controller has sufficient charge.

6.2. Button Mapping Discrepancies (Nintendo Switch)

When using the M30 controller with Nintendo Switch, particularly with classic game compilations, you may encounter unexpected button mapping (e.g., A mapping to B, or C mapping to a shoulder button). This is due to the Switch's default button assignments for Pro Controllers and the specific game's internal mapping.

While the Switch allows remapping of controls, some older game compilations may not fully support custom button assignments. For the most accurate classic experience, consider using the 8Bitdo Retro Receiver with original SEGA hardware, where button mapping is typically preserved as intended.

6.3. 펌웨어 업데이트

If you experience persistent issues, ensure your controller's firmware is up to date. Visit the official 8Bitdo support web사이트 (support.8bitdo.com) for the latest firmware and update instructions.

7. 사양

8. 보증 및 지원

For detailed warranty information, product support, and the latest firmware updates, please visit the official 8Bitdo support web대지:

support.8bitdo.com