1. 서론
This manual provides detailed instructions for the proper setup, operation, and maintenance of the Topcon DT-209 Optical Digital Theodolite. To ensure accurate measurements and prolong the life of your instrument, please read this manual thoroughly before use and keep it for future reference.
2. 제품 오버view
The Topcon DT-209 is an optical digital theodolite designed for precise angle measurements in surveying and construction applications. It features a digital display for clear readings and robust construction for field use.
그림 2.1: Topcon DT-209 Digital Theodolite shown with its protective carrying case. The instrument is positioned in front of the case, highlighting its compact design and the included transport solution.
그림 2.2: 앞쪽 view of the Topcon DT-209. This image clearly displays the digital screen, control buttons (R/L, HOLD, 0 SET, POWER, CLOCK), and the objective lens, which are essential for operation.
그림 2.3: 옆 view of the Topcon DT-209, illustrating the eyepiece, focusing knob, and horizontal clamp. This perspective provides a view of the instrument's profile and key adjustment components.
3. 설정
- 짐 풀기: Carefully remove the theodolite from its carrying case. Inspect for any visible damage.
- 설치: Securely attach the theodolite to a stable tripod. Ensure the tripod legs are spread wide and firmly planted on the ground.
- 수준 측량: Use the circular bubble level and the plate levels to roughly level the instrument. Fine-tune leveling using the foot screws while observing the electronic level display (if available) or the plate levels.
- 전원 켜기: 를 누르세요 힘 기기를 켜는 버튼입니다.
4. 사용 설명서
4.1. Basic Angle Measurement
- 영점 설정: Point the telescope to the initial reference point. Press the 0세트 button to set the horizontal angle to 0°00'00".
- 타겟팅: Rotate the instrument and point the telescope to the target point. Use the tangent screws for fine adjustment.
- 독서: Read the horizontal and vertical angles directly from the digital display.
4.2. Changing Horizontal Angle Mode
를 누르세요 오른쪽/왼쪽 button to switch between right (clockwise) and left (counter-clockwise) horizontal angle measurement modes.
4.3. Holding a Reading
To hold the current angle reading on the display, press the 잡고 있다 버튼을 누르세요. 다시 누르면 버튼이 놓입니다.
5. 유지관리
- 청소: After each use, gently wipe the instrument with a soft, dry cloth. For lenses, use a specialized lens cleaning cloth and solution. Avoid abrasive materials.
- 저장: Always store the theodolite in its protective carrying case when not in use. Store in a dry, temperature-controlled environment.
- 배터리 관리 : If the instrument uses removable batteries, remove them during long periods of storage to prevent leakage.
- 구경 측정: Regular calibration by a qualified service technician is recommended to maintain accuracy.
6. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 기기의 전원이 켜지지 않습니다. | 배터리가 부족하거나 방전되었습니다. | 배터리를 새 배터리로 교체하십시오. 극성이 올바른지 확인하십시오. |
| Display shows erratic readings. | Instrument not properly leveled; environmental interference. | Re-level the instrument carefully. Shield from strong vibrations or electromagnetic fields. |
| Difficulty focusing the telescope. | Eyepiece not adjusted for user's vision; object too close/far. | Adjust the eyepiece diopter. Ensure the target is within the instrument's focusing range. |
7. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 탑콘 |
| 모델 | DT-209 |
| 스타일 | 디지털 |
| 작동 모드 | 수동 |
| 색상 | 검은색 |
| 한국어: | 696545805318 |
| 배터리가 포함되어 있나요? | 아니요 |
| 배터리가 필요하세요? | 아니요 |
8. 보증 및 지원
Specific warranty information for the Topcon DT-209 Optical Digital Theodolite is not provided within this manual. Please refer to your purchase documentation or contact your authorized Topcon dealer for details regarding warranty coverage and technical support services.
