소개
Thank you for choosing the Ferroli Divo 15L Electric Water Geyser Heater. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your new water heater. Please read this manual thoroughly before installation and use, and keep it for future reference.
The Ferroli Divo 15L is designed to provide a reliable supply of hot water for everyday household use, featuring a compact design and a white finish to complement various interiors.
안전 정보
중요 안전 지침:
- 이 제품을 사용하기 전에 모든 지침을 읽으세요.
- 설치는 모든 현지 규정과 법규에 따라 자격을 갖춘 기술자가 수행해야 합니다.
- 전원 공급 장치가 볼륨과 일치하는지 확인하십시오.tage 제품 라벨에 명시된 요구 사항.
- 전원 코드나 플러그가 손상되었거나 제대로 작동하지 않는 경우 온수기를 작동하지 마십시오.
- Never attempt to repair or disassemble the unit yourself. Contact authorized service personnel.
- 작동 중에는 어린이가 제품 가까이에 두지 않도록 하십시오.
- 감전을 방지하기 위해 올바르게 접지하십시오.
- 환기구를 막지 마십시오.
제품 끝view
그림 1: 전면 view of the Ferroli Divo 15L Electric Water Geyser Heater. This image shows the compact, cylindrical design of the white water heater with the 'Ferroli' logo at the top and 'Divo' near the bottom.
The Ferroli Divo 15L Electric Water Geyser Heater is a storage-type water heater designed for domestic use. Key components include:
- 외부 Casing: Durable white exterior.
- Inner Tank: Stores and heats water.
- 가열 요소: Electrically heats the water.
- 온도 조절기 : Regulates water temperature.
- 압력 방출 밸브: Safety mechanism to release excess pressure.
- 표시등: Show operational status (e.g., heating, power on).
설정 및 설치
메모: Installation should only be carried out by a certified plumber or electrician.
- 위치 선택: Choose a suitable location that is close to the point of use, has adequate wall support for the unit's weight when full, and is protected from freezing temperatures. Ensure sufficient space for maintenance.
- 설치: Securely mount the geyser to a sturdy wall using appropriate fasteners. Refer to the mounting template (if provided with the product) for precise drilling locations.
- 물 연결: Connect the cold water inlet and hot water outlet pipes. Install a pressure relief valve on the cold water inlet line as per local regulations. Ensure all connections are watertight.
- 전기 연결: Connect the geyser to a dedicated electrical circuit with proper grounding. Ensure the circuit breaker rating is appropriate for the geyser's power consumption.
- 탱크 채우기: Before powering on, open a hot water faucet in your home to allow air to escape and the tank to fill completely with water. Close the faucet once water flows steadily.
작동 지침
- 전원 켜기: After ensuring the tank is full of water, switch on the main power supply to the geyser. The power indicator light will illuminate.
- 온도 설정: Adjust the thermostat knob (if present) to your desired water temperature. For energy efficiency and safety, a setting between 45°C and 55°C is generally recommended.
- 가열 주기: The heating indicator light will turn on, indicating that the water is being heated. Once the set temperature is reached, the heating light will turn off, and the geyser will maintain the temperature.
- 전원 끄기 : To turn off the geyser, switch off the main power supply. For extended periods of non-use, it is advisable to also turn off the water supply to the unit.
유지
Regular maintenance ensures the longevity and efficient operation of your Ferroli Divo 15L geyser.
- 배수: Periodically drain the tank to remove sediment buildup. This should be done at least once a year, or more frequently in areas with hard water. Turn off power and water supply before draining.
- Pressure Relief Valve (PRV) Test: Test the PRV annually by lifting the lever to ensure it operates freely and releases water. If it does not, replace it immediately.
- 양극봉 검사: The anode rod protects the tank from corrosion. It should be inspected and replaced every 1-3 years, depending on water quality. This task should be performed by a qualified technician.
- 외부 청소: Clean the exterior of the geyser with a soft, damp 천. 연마성 세척제나 용매를 사용하지 마십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 뜨거운 물이 없습니다 | 정전; 온도 조절기 설정값이 너무 낮음; 차단기 작동; 발열체 고장. | Check power supply; adjust thermostat; reset circuit breaker; contact service for element replacement. |
| 물이 충분히 뜨겁지 않음 | 온도 조절기가 너무 낮게 설정되어 있거나, 온수 사용량이 과도하거나, 침전물이 쌓여 있을 수 있습니다. | 온도 조절기 설정을 높이고, 회복 시간을 기다린 후, 탱크를 비우고 세척하십시오. |
| Leaking from geyser | 연결 부위가 헐거워짐; 압력 방출 밸브 불량; 탱크 부식. | Tighten connections; replace PRV; contact service for tank inspection. |
| 특이한 소음 | Sediment buildup in tank; faulty heating element. | Drain and flush tank; contact service for element inspection. |
If the problem persists after attempting these solutions, please contact Ferroli customer support or a qualified service technician.
명세서
- 모델: Divo 15L
- 용량: 15리터
- 유형: 전기 저장 온수기
- 색상: 하얀색
- 품목 무게: 3kg
- 품목 크기(LxWxH): 37.5 x 38.7 x 60.3 센티미터
- 포함된 구성 요소: 1 Geyser
- 상표: 페 롤리
- ASIN: B07MMSM2YX
보증 및 지원
Ferroli products are manufactured to high-quality standards. For warranty information, please refer to the warranty card included with your product or visit the official Ferroli web사이트. 보증 청구를 위해 구매 증빙 자료로 구매 영수증을 보관하세요.
For technical support, service requests, or spare parts, please contact Ferroli customer service. Contact details can typically be found on the product packaging, the official Ferroli web사이트 또는 구매 문서.
