1. 서론
Welcome to your new TFA Dostmann 35.1150.01 Wireless Weather Station. This manual provides detailed instructions for the proper setup, operation, and maintenance of your device to ensure optimal performance and longevity. Please read this manual thoroughly before using the weather station.
그림 1: The main display unit of the TFA Dostmann 35.1150.01 Wireless Weather Station, showing outdoor and indoor temperature/humidity, weather forecast, moon phase, relative pressure history, and time/date.
2. 패키지 내용
모든 품목이 들어 있는지 확인하려면 패키지 내용물을 확인하세요.
- TFA Dostmann 35.1150.01 Main Display Unit
- 무선 실외 온도/습도 센서
- 사용 설명서
3. 안전 정보
기기 손상이나 개인 상해를 예방하려면 다음 안전 예방 조치를 준수하세요.
- 본체를 극한 온도, 직사광선 또는 습기에 노출시키지 마십시오.
- The outdoor sensor is weather-resistant but should be placed in a sheltered location to prolong its lifespan.
- 지정된 AA형 배터리만 사용하고 설치 시 극성을 반드시 확인하십시오.
- 오래된 건전지와 새 건전지, 다른 종류의 건전지를 혼용하지 마세요.
- 누출을 방지하기 위해 방전된 배터리는 즉시 제거하세요.
- 배터리를 어린이의 손이 닿지 않는 곳에 보관하세요.
- 직접 기기를 분해하거나 수리하지 마십시오. 정비를 받으려면 자격을 갖춘 기술자에게 문의하십시오.
4. 설정
4.1 배터리 설치
- 메인 디스플레이 장치: Open the battery compartment cover on the back of the main unit. Insert 3 new AA batteries, observing the correct polarity (+/-). Close the cover.
- 무선 실외 센서: Open the battery compartment cover on the back of the outdoor sensor. Insert 2 new AA batteries, observing the correct polarity (+/-). Close the cover.
4.2 센서 배치
For accurate readings and optimal wireless transmission:
- Place the outdoor sensor in a location that is sheltered from direct sunlight and rain.
- Ensure the sensor is mounted vertically and away from heat sources (e.g., vents, windows) or cold sources (e.g., air conditioning units).
- The maximum transmission range between the main unit and the sensor is approximately 100 meters (330 feet) in open areas. Walls, metal structures, and electronic devices can reduce this range.
그림 2: The wireless outdoor temperature and humidity sensor, designed for remote placement.
4.3 초기 동기화
After inserting batteries into both units, the main display unit will automatically search for the outdoor sensor. This process may take a few minutes. Once connected, the outdoor temperature and humidity readings will appear on the main display.
- If the outdoor readings do not appear, press the 'SEARCH' or 'CHANNEL' button on the main unit (if available) to initiate a manual search.
- Ensure both units are within range and free from interference.
5. 기상 관측소 작동
5.1 디스플레이 오버view
The main display unit provides a comprehensive overview of weather data:
- 야외 섹션: Displays current outdoor temperature and humidity, along with signal strength for the wireless sensor.
- 실내 섹션: 현재 실내 온도와 습도를 보여줍니다.
- 예측: Weather forecast icons (e.g., sunny, cloudy, rainy) based on atmospheric pressure changes.
- 문 페이즈: 달의 현재 위상을 나타냅니다.
- Relative Pressure History: A bar graph showing atmospheric pressure trends over the last 12 or 24 hours.
- 시간과 날짜: 현재 시간, 요일 및 날짜를 표시합니다.
5.2 버튼 기능(일반)
While specific button labels may vary, common functions include:
- 모드/설정: Used to cycle through display modes or enter setting mode.
- UP/DOWN (or +/-): Used to adjust values during setting mode or view 역사적 데이터.
- 채널: If multiple outdoor sensors are supported, this button cycles through sensor channels.
- 알리다: To set temperature or humidity alerts.
5.3 시간 및 날짜 설정
Refer to the specific instructions in your manual for detailed steps on setting the time, date, and alarm functions. Typically, this involves pressing and holding the 'SET' or 'MODE' button to enter setting mode, then using 'UP'/'DOWN' buttons to adjust values and 'SET'/'MODE' to confirm and move to the next setting.
5.4 단위 선택 (°C/°F)
Most weather stations allow you to switch between Celsius (°C) and Fahrenheit (°F) for temperature readings. Look for a dedicated button or a setting option within the 'SET' menu.
6. 유지관리
- 청소: 디스플레이 장치와 센서를 부드러운 천으로 닦으세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 배터리 교체: Replace batteries in both units when the low battery indicator appears on the display. Always replace all batteries in a unit at the same time.
- 센서 관리: Periodically check the outdoor sensor for debris or insect nests that might obstruct its ventilation openings.
7. 문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 실외 온도/습도 측정이 불가능합니다. | 센서가 범위를 벗어났거나, 센서 배터리가 부족하거나, 간섭이 발생했습니다. | Relocate sensor closer to the main unit. Replace sensor batteries. Check for sources of interference. Press 'SEARCH' or 'CHANNEL' button on main unit. |
| 온도/습도 측정값 오류 | Sensor exposed to direct sunlight/heat source, main unit near heat source. | Relocate sensor to a shaded, well-ventilated area. Move main unit away from heat/cold sources. |
| 디스플레이가 비어 있거나 어둡습니다 | 본체 배터리 잔량이 부족합니다. | 본체 배터리를 교체하십시오. |
| 날씨 예보가 정확하지 않은 것 같습니다 | Weather forecast is based on atmospheric pressure changes and is an estimation. | Allow 24-48 hours for the station to calibrate to local pressure. Forecasts are not always 100% accurate and should be used as a general guide. |
8. 기술 사양
| 특징 | 사양 |
|---|---|
| 모델 번호 | 35.1150.01 |
| 상표 | TFA 도스트만 |
| 제품 치수(본체) | 17.5 x 8.4 x 16.5cm |
| 중량(본체) | 333g |
| 전원(주 장치) | AA 배터리 3개(포함되지 않음) |
| 전원(실외 센서) | AA 배터리 2개(포함되지 않음) |
| 무선 범위 | 최대 100미터(개방형) |
| 원산지 | 독일 |
| 특징 | 가벼운 디자인 |
그림 3: The main display unit with indicated dimensions: 17.5 cm width, 16.5 cm height, and 3.2 cm depth.
9. 보증 및 지원
TFA Dostmann products are manufactured with quality and precision. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official TFA Dostmann website. For technical support or service inquiries, please contact your retailer or the TFA Dostmann customer service department.
보증 청구를 위해 구매 증빙서류를 보관하세요.
