Ultimate Speed Portable Power Bank and Car Jump Starter

1. 서론

Thank you for choosing the Ultimate Speed Portable Power Bank and Car Jump Starter. This versatile 2-in-1 device is designed to provide emergency jump-starting for vehicles and serve as a portable power bank for charging electronic devices. Please read this manual carefully before first use to ensure safe and optimal operation.

2. 안전 정보

WARNING: Improper use can lead to serious injury or damage to the device/vehicle.

• 배터리를 다룰 때는 항상 보호 안경과 장갑을 착용하세요.
• 기기를 비, 습기 또는 극한의 온도에 노출시키지 마세요.
• 어린이의 손이 닿지 않는 곳에 보관하세요.
• 사용 중 적절한 환기를 하십시오.
• 점프 스타터 회로를 단락시키지 마십시오.amps.
• Do not attempt to jump start a frozen or visibly damaged battery.
• This device is spark-proof, but always avoid contact with flammable materials.
• Disconnect the device from the vehicle battery immediately after jump-starting.

3. 패키지 내용

다음 품목이 패키지에 포함되어 있는지 확인하세요.

• Ultimate Speed Portable Power Bank and Car Jump Starter
• 12V Jump Start Cable with clamps
• Micro USB Adapter for mobile phones/tablets
• Fabric Storage Case
• Acrylonitrile Butadiene Styrene (ABS) Plastic Case
• 충전기(전원 어댑터)

Image: The Ultimate Speed jump starter with its complete set of accessories, including the jump start cables, USB charging cable, and power adapter.

4. 제품 특징 및 구성품

The Ultimate Speed Jump Starter features a robust design and advanced technology for reliable performance.

• 2-in-1 기능: Car jump starter and powerful power bank.
• 여러 포트 : Two USB output ports (1A/2A) and one Micro-USB input port (5V/1A).
• 통합 LED 손전등: With a blinking function for emergencies.
• 고급 보호: Built-in safeguards against reverse polarity, short circuit, and overload. Detects defective batteries and deep discharges for maximum user and electronic protection.
• 스파크 방지 설계: Enhances safety during connection.
• LiFePO4 배터리: Powerful Lithium-Ion (Iron Phosphate) battery for high electronic efficiency (up to 90% usable capacity), long cycle stability, and very low self-discharge.
• 미끄럼 방지 표면: 안전한 취급을 위해.
• Direct Start: Provides a high current pulse for immediate starting without long charging times.

이미지: 앞면 view of the Ultimate Speed jump starter, showing the product label with model information and key specifications.

이미지: 측면 view of the device, highlighting the USB output ports, Micro-USB input, 12V output, power button, and integrated LED flashlight.

5. 설정

5.1 Initial Charging of the Device

Before first use, fully charge the jump starter. Connect the provided charger to the Micro-USB input port on the device and plug it into a 230V mains outlet. The charging time is approximately 13.5 hours for a full charge. The charge status is indicated by individual start LEDs.

5.2 Checking Charge Level

Press the power button briefly to check the current charge level. The LEDs will illuminate to indicate the remaining battery capacity.

6. 사용 설명서

6.1 차량 점프 스타트

This device is suitable for petrol engines up to 3.0 L displacement and diesel engines up to 2.0 L displacement.

1. Ensure the jump starter is sufficiently charged.
2. Turn off the vehicle's ignition and all electrical accessories.
3. 빨간색(+) cl을 연결합니다.amp of the jump start cable to the positive (+) terminal of the vehicle's battery.
4. 검은색(-) cl을 연결합니다.amp of the jump start cable to a clean, unpainted metal part of the vehicle's engine block or chassis, away from the battery.
5. Connect the jump start cable's plug to the 12V output port on the jump starter.
6. Start the vehicle's engine. If it doesn't start immediately, wait 30 seconds before trying again. Do not crank for more than 3 seconds.
7. Once the engine starts, immediately disconnect the jump start cable from the jump starter.
8. 그런 다음 검은색 (-) 단자를 분리하십시오.amp from the vehicle, followed by the red (+) clamp.

Image: The Ultimate Speed jump starter connected to a car battery, demonstrating the proper clamp placement for jump-starting.

이미지: 또 다른 view of the jump starter connected to a car battery, showing the compact size of the device in an engine bay.

6.2 파워뱅크로 사용하기

이 기기는 휴대폰, 태블릿 및 기타 USB 전원 장치를 충전할 수 있습니다.

1. Connect your device's USB charging cable to one of the USB output ports (1A or 2A) on the jump starter.
2. 케이블의 다른 쪽 끝을 전자 장치에 연결합니다.
3. The jump starter will begin charging your device automatically.

Image: The jump starter being used as a power bank, charging a smartphone via its USB port.

6.3 LED 손전등 사용법

Press and hold the power button to turn the LED flashlight on or off. Press the power button briefly while the flashlight is on to cycle through different modes (e.g., steady light, blinking light).

7. 유지관리

• 충전재: To maintain battery health, recharge the jump starter every 3-6 months, even if not in use.
• 저장: 기기를 서늘하고 건조한 곳에 보관하고, 직사광선과 극한의 온도를 피하세요.
• 청소: 부드럽고 마른 천으로 기기를 닦으세요. 강한 화학 물질이나 연마성 세제는 사용하지 마세요.

8. 문제 해결

9. 사양

10. 보증 및 지원

For warranty claims or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. Specific warranty terms and conditions may vary by region and retailer.