1. 서론
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Ferroli Divo 15L Horizontal Electric Water Geyser. Please read these instructions carefully before using the appliance and retain them for future reference. Proper installation and adherence to these guidelines will ensure optimal performance and longevity of your water heater.
2. 안전 정보
중요 안전 지침:
- Ensure the appliance is installed by a qualified technician in accordance with local regulations and safety standards.
- Do not operate the water heater if it is damaged or malfunctioning. Disconnect power immediately and contact service personnel.
- Always ensure the water heater is filled with water before switching on the power supply to prevent damage to the heating element.
- 차단하거나 tamper with the pressure relief valve. This valve is crucial for safety and must be checked regularly.
- 온수기에서 가연성 물질을 멀리 두십시오.
- 어린이가 이 제품을 가지고 놀지 못하도록 감독해야 합니다.
- 감전을 방지하기 위해 기기를 적절히 접지해야 합니다.
3. 제품 특징
- Blue Forever Heating Element: Designed for durability and efficient heating.
- Long Lasting Aluminum Anode: Provides enhanced protection against corrosion, extending tank life.
- Healthy Blue Silicon Enamel Coated Tank: Ensures hygiene and resistance to rust.
- High Pressure Rating - 8 Bar: Suitable for high-rise buildings and pressure pump applications.
- Environmental Friendly CFC Free Installation: Contributes to environmental protection.
- BEE 5 Star Rated Product*: Indicates high energy efficiency, reducing electricity consumption.
- Hi-tech Thermostat Cut-out: Provides additional safety by preventing overheating.
4. 설정 및 설치
The Ferroli Divo 15L water geyser is designed for horizontal wall mounting. Professional installation is highly recommended to ensure proper functioning and safety. Ensure the installation location is suitable to support the weight of the geyser when full of water and allows for easy access for maintenance.
Figure 1: Ferroli Divo Horizontal Water Geyser mounted on a tiled wall. Please note that while the image displays '25 Ltr', this manual pertains to the 15L model. The installation process is similar.
Installation Steps (Summary - consult a professional for detailed steps):
- Select a suitable wall location capable of supporting the geyser's weight.
- Mount the geyser horizontally using appropriate fasteners and brackets.
- Connect the cold water inlet and hot water outlet pipes. Ensure all connections are watertight.
- Install the pressure relief valve as per manufacturer guidelines.
- Fill the geyser with water by opening a hot water tap until water flows freely, indicating the tank is full.
- Connect the electrical supply to a properly grounded outlet.
- Verify all connections and ensure no leaks before powering on.
5. 사용 설명서
Once installed and filled with water, the Ferroli Divo 15L water geyser is ready for operation.
- 전원 켜기: Switch on the main power supply to the geyser. An indicator light (if present) will illuminate.
- 온도 설정: Adjust the thermostat knob (if externally accessible) to your desired water temperature. For energy efficiency and safety, avoid setting the temperature too high.
- 가열 주기: The geyser will begin heating the water. The heating element will automatically switch off once the set temperature is reached. It will reactivate when the water temperature drops.
- 전원 끄기 : When not in use for extended periods, it is advisable to switch off the power supply to the geyser.
6. 유지관리
Regular maintenance ensures the longevity and efficient operation of your water geyser.
- 배수: Periodically drain the tank to remove sediment buildup, especially in areas with hard water. Consult a professional for this procedure.
- 압력 방출 밸브 점검: Manually operate the pressure relief valve at least once a year to ensure it is not blocked. Follow manufacturer's instructions for this check.
- 양극봉 검사: The aluminum anode rod should be inspected and replaced periodically (typically every 1-3 years, depending on water quality) to maintain corrosion protection. This should be done by a qualified technician.
- 청소: 부드러운 천으로 간헐천 외부를 닦으세요.amp 천. 연마성 세척제나 용매를 사용하지 마십시오.
- 전문적인 서비스: It is recommended to have the geyser professionally serviced every 1-2 years.
7. 문제 해결
고객 서비스에 연락하기 전에 다시view 다음은 일반적인 문제와 해결책입니다.
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 뜨거운 물이 없습니다 | No power supply; thermostat set too low; heating element failure. | Check circuit breaker/fuse; adjust thermostat; contact service for element replacement. |
| 온수가 부족함 | Thermostat set too low; high hot water demand; sediment buildup. | Increase thermostat setting; reduce hot water usage; drain tank (professional service). |
| 너무 뜨거운 물 | 온도 조절기가 너무 높게 설정되었거나, 온도 조절기가 고장났습니다. | Lower thermostat setting; contact service for thermostat replacement. |
| 간헐천에서 새어 나오는 액체 | Loose pipe connections; faulty pressure relief valve; tank corrosion. | Tighten connections; check/replace pressure relief valve; contact service for tank inspection. |
| 특이한 소음 | 탱크 내 침전물 축적; 가열 요소 불량. | Drain tank (professional service); contact service for element inspection. |
For issues not listed or if solutions do not resolve the problem, please contact Ferroli customer support.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 상표 | 페 롤리 |
| 모델 | Divo 15L Horizontal Electric Water Geyser |
| 용량 | 15리터 |
| 장착 유형 | Wall (Horizontal) |
| 전원 | 코드식 전기 |
| 최대 작동 압력 | 8개의 막대 |
| 특별 기능 | BEE 5 Star Rated Product*, Hi-tech Thermostat cut out for additional safety |
| 색상 | 하얀색 |
| 능률 | 고효율성 |
| 제품 크기(LxWxH) | 37.5 x 38.7 x 60.3cm |
| 품목 무게 | 12.2kg |
| 포함된 구성 요소 | 1 간헐천 |
| ASIN | B07M912GPB |
9. 보증 및 지원
Ferroli products are manufactured to high-quality standards and come with a standard warranty. Please refer to the warranty card included with your purchase for specific terms and conditions, including warranty period and coverage details.
For technical assistance, service requests, or to inquire about spare parts, please contact Ferroli customer support through their official web해당 사이트 또는 보증서에 제공된 연락처 정보를 참조하십시오.
