1. 서론
This user manual provides detailed instructions for the installation, operation, and troubleshooting of the SIIG HDMI 2.0 Audio Extractor (Model: CE-H24F11-S1). This device is designed to split an incoming HDMI audio signal into stereo analog audio and Toslink optical outputs, enabling connection to various audio systems that may lack HDMI input.
The extractor supports high-resolution video up to 4K/60Hz with HDR and is compliant with HDCP 2.2. It also features ARC (Audio Return Channel) support via Toslink and CEC bypass, ensuring compatibility with modern home theater setups. Please read this manual thoroughly before use to ensure proper setup and optimal performance.
2. 제품 특징
- HDMI 2.0a and HDCP 2.2 compliant.
- Supports HDCP 2.2, HDR, and CEC bypass.
- Video resolutions up to 4Kx2K@60Hz YUV 4:4:4 8-bit and 4K HDR YUV 4:2:0 10-bit.
- Supports 480p, 720p, 1080i, 1080p resolutions.
- Video bandwidth: 18Gbps (600MHz per channel).
- Audio extraction via 3.5mm stereo jack and Toslink optical output.
- ARC audio extraction via Toslink (S/PDIF).
- Supports audio embedded via stereo and S/PDIF (Toslink).
- 지원되는 오디오 형식:
- HDMI: PCM 2/5.1/7.1, Dolby 5.1/7.1, DTS 5.1/7.1
- Toslink (S/PDIF): PCM 2, Dolby 5.1, DTS 5.1
- 3.5mm Stereo: PCM 2
- Sturdy metal enclosure for durability and EMI/RFI noise interference minimization.
- ESD protection: ±15kV Air & ±8kV Contact.
- Country of origin: Taiwan.
- Regulatory approvals: FCC, CE, RoHS.
3. 패키지 내용
Please verify that all items are present and in good condition. If any items are missing or damaged, contact your vendor for assistance.
- 1x HDMI 2.0 Audio Extractor/Embedder (CE-H24F11-S1)
- 1x USB Type-A to Micro B Cable (for power)
- 1x Installation Guide (this document)
4. 제품 오버view and Port Descriptions
전면 패널:
- 3.5mm Stereo Output: Connect to analog audio devices (e.g., headphones, stereo speakers).
- S/PDIF (Toslink) Output: Connect to digital optical audio receivers or soundbars.
- HDMI 출력: Connect to an HDMI display (e.g., TV, monitor, projector).
- Output Signal LED Indicator: Illuminates when an HDMI output signal is detected.
- 재설정 버튼: 장치를 재설정하는 데 사용됩니다.
- Slide Switch (FW/NORMAL Mode):
- Left (FW): Firmware update mode.
- Right (NORMAL): Normal operating mode. Ensure this is set to NORMAL for regular use.
후면 패널 :
- Micro-USB Port (DC 5V): Connect the provided USB power cable for device power. Also used for firmware updates.
- 전원 LED 표시기: 기기의 전원이 켜지면 켜집니다.
- Input Signal LED Indicator: HDMI 입력 신호가 감지되면 불이 켜집니다.
- HDMI 입력: Connect to an HDMI source device (e.g., Blu-ray player, game console, streaming device).
- 4-pin DIP Switch: Used to configure EDID settings and enable/disable ARC and audio extraction functions.
5. 설정 지침
Follow these steps to set up your SIIG HDMI 2.0 Audio Extractor:
- 전원 끄기 장치: Ensure all source devices, displays, and audio systems are powered off before making any connections.
- HDMI 입력 연결: Connect an HDMI cable from your source device (e.g., Blu-ray player, game console) to the HDMI 입력 port on the audio extractor.
- HDMI 출력 연결: HDMI 케이블을 연결하세요 HDMI 출력 port on the audio extractor to your display device (e.g., TV, monitor, projector).
- Connect Audio Output (Digital): For digital audio, connect a Toslink (optical) cable from the S/PDIF (Toslink) Output port on the extractor to your audio receiver, soundbar, or amp리퍼.
- Connect Audio Output (Analog): For analog stereo audio, connect a 3.5mm audio cable from the 3.5mm 스테레오 출력 port on the extractor to your headphones or stereo speakers.
- 전원 연결: Connect the provided USB Type-A to Micro B cable to the 마이크로 USB 포트(DC 5V) on the extractor and the other end to a USB power source (e.g., USB wall adapter, TV USB port). The Power LED Indicator will illuminate.
- Verify Slide Switch: Ensure the slide switch on the front panel is set to the 정상 position (right).
- 전원 켜기 장치: 디스플레이, 오디오 시스템, 소스 장치의 전원을 순서대로 켭니다.
6. 사용 설명서
6.1 EDID and Function Configuration (DIP Switch)
The 4-pin DIP switch on the back panel allows you to configure the EDID (Extended Display Identification Data) settings and control the ARC and audio extraction functions. Adjust these settings based on your connected devices and desired audio output.
| DIP 스위치 위치 | 설명 |
|---|---|
| PIN1: OFF, PIN2: OFF | EDID 우회 |
| PIN1: OFF, PIN2: ON | Ultra HD (4K2K@60Hz) – 8/10/12bit, 3D, HDR video & 5.1ch audio |
| PIN1: ON, PIN2: OFF | Ultra HD (4K2K@60Hz) – 8/10/12bit, 3D, HDR video & 2ch audio |
| PIN1: ON, PIN2: ON | Learning EDID from Output |
| PIN3: OFF | Disable ARC Function |
| PIN3: ON | Enable ARC Function |
| PIN4: OFF | Disable Audio Extractor Function |
| PIN4: ON | Enable Audio Extractor Function (via Toslink & 3.5mm) |
메모: After changing DIP switch settings, it is recommended to power cycle the audio extractor and all connected devices to ensure the new settings are applied correctly.
6.2 ARC (Audio Return Channel) Function
When ARC is enabled (PIN3 ON) and your display supports ARC, audio from your TV's internal tuner or smart apps can be sent back to the audio extractor via the HDMI cable and then output through the Toslink (S/PDIF) port to your audio system.
6.3 CEC Bypass
The device supports CEC (Consumer Electronics Control) bypass, allowing CEC commands to pass through the extractor to control connected HDMI devices. This means you can use a single remote to control multiple CEC-enabled devices in your setup.
7. 문제 해결
If you encounter issues with the SIIG HDMI 2.0 Audio Extractor, please refer to the following common troubleshooting steps:
- 비디오 출력 없음:
- 모든 HDMI 케이블이 제대로 연결되어 있는지 확인하세요.
- Verify the input source is selected correctly on your display.
- Check the power connection to the extractor; the Power LED should be illuminated.
- 다른 HDMI 케이블을 사용해 보세요.
- Adjust DIP switch settings for EDID (PIN1 & PIN2) to match your display's capabilities or try "EDID bypass".
- Power cycle all connected devices (source, extractor, display).
- No Audio Output (Toslink/3.5mm):
- Ensure audio cables (Toslink or 3.5mm) are securely connected to the correct output ports on the extractor and input ports on your audio system.
- Verify the audio input is selected correctly on your audio receiver/soundbar.
- Check DIP switch PIN4 is set to ON to enable audio extraction.
- If using ARC, ensure DIP switch PIN3 is set to ON and your TV's ARC function is enabled.
- Confirm the audio format from your source is supported by your audio system and the extractor (refer to "Product Features" for supported formats). Some audio systems may not support certain multi-channel formats.
- Try setting DIP switch PIN1: ON, PIN2: OFF for 2ch audio output if your audio system only supports stereo.
- Power cycle all connected devices.
- 간헐적인 비디오/오디오:
- 느슨한 케이블 연결을 확인하십시오.
- 전원 공급이 안정적인지 확인하세요.
- Reduce cable lengths if possible, especially for HDMI.
- Verify that the slide switch is in the 정상 위치.
- 다른 HDMI 케이블로 테스트해 보세요.
- HDR/4K Issues:
- Ensure all connected HDMI cables are rated for HDMI 2.0 or higher and support 18Gbps bandwidth.
- Verify your source and display devices both support 4K/60Hz and HDR.
- Adjust EDID settings (PIN1 & PIN2) to ensure the correct video mode is selected.
8. 사양
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | CE-H24F11-S1 |
| HDMI 준수 | HDMI 2.0a |
| HDCP 준수 | 한국어: HDCP 2.2 |
| 비디오 대역폭 | 18Gbps (600MHz per channel) |
| 지원되는 해상도 | Up to 4Kx2K@60Hz (YUV 4:4:4 8-bit), 4K HDR (YUV 4:2:0 10-bit), 1080p, 1080i, 720p, 480p |
| HDR 지원 | Yes (4K@60Hz YUV 4:2:0 10-bit) |
| 오디오 출력 | 1x Toslink (S/PDIF), 1x 3.5mm Stereo |
| ARC 지원 | Yes (via Toslink) |
| CEC 지원 | 우회로 |
| ESD 보호 | ±15kV Air & ±8kV Contact |
| 재료 | 금속 인클로저 |
| 제품 치수(L x W) | 4.56인치 x 0.78인치(11.58cm x 1.98cm) |
| 품목 무게 | 6.4 온스(181.4그램) |
| 전원 공급 장치 | DC 5V (via Micro-USB) |
| 작동 온도 | 최대 104 ° C (40 ° F) |
| 인증 | FCC, CE, RoHS, TAA compliant |
| 원산지 | 대만 |
9. 유지관리
The SIIG HDMI 2.0 Audio Extractor is designed for reliable operation with minimal maintenance.
- 청소: Use a soft, dry cloth to clean the device. Avoid using liquid or aerosol cleaners, as they may damage the unit.
- 통풍: 과열을 방지하려면 기기를 환기가 잘 되는 곳에 두십시오. 환기구를 막지 마십시오.
- 저장: 장시간 사용하지 않을 경우, 직사광선과 극한의 온도를 피해 시원하고 건조한 곳에 보관하세요.
- 펌웨어 업데이트: Periodically check the SIIG website for any available firmware updates for your model. Follow the instructions provided with the firmware update carefully.
10. 안전 정보
기기 손상을 방지하고 사용자의 안전을 확보하기 위해 다음 안전 지침을 준수해 주십시오.
- 기기를 물이나 과도한 습기에 노출시키지 마세요.
- 기기를 열거나 개조하려고 시도하지 마십시오. 내부에는 사용자가 수리할 수 있는 부품이 없습니다.
- Use only the provided power cable or a certified 5V USB power adapter.
- 기기를 열원, 직사광선, 가연성 물질로부터 멀리 두십시오.
- Ensure proper grounding for all connected electrical equipment.
11. 보증 및 기술 지원
11.1 보증 정보
The SIIG HDMI 2.0 Audio Extractor (CE-H24F11-S1) comes with a 3년 보증. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation provided with your purchase or visit the official SIIG web대지.
11.2 기술 지원
For technical assistance, product inquiries, or troubleshooting beyond the scope of this manual, please contact SIIG customer support.
- Web대지: Visit the official SIIG web지원 리소스, FAQ 및 연락처 정보를 제공하는 사이트입니다.
- 연락하다: Refer to your product packaging or the SIIG website for the most current contact details for technical support.
