소개
본 설명서는 제품의 설치, 작동 및 유지 관리에 대한 포괄적인 지침을 제공합니다. Webasto Air Heater MultiControl Timer. This device is designed to enhance the functionality of your Webasto Air Top Evo heater, allowing for precise control over heating schedules and modes. Please read this manual thoroughly before operating the device to ensure safe and efficient use.
중요한 안전 정보
부상이나 기기 손상을 방지하기 위해 항상 다음 안전 수칙을 준수하십시오.
- Ensure the device is installed by qualified personnel in accordance with all local and national regulations.
- 설치, 유지관리 또는 문제 해결을 수행하기 전에 전원을 분리하세요.
- 기기를 극한의 온도, 습기 또는 직사광선에 노출시키지 마십시오.
- 정품만 사용 Webasto replacement parts and accessories.
- 작동 중에는 어린이가 기기에 접근하지 못하도록 하세요.
- Refer to the main heater manual for additional safety guidelines related to the heating system.
제품 끝view
그만큼 Webasto MultiControl Timer is an advanced control unit for Webasto Air Top Evo heaters. It features a clear display, intuitive rotary knob, and push buttons for easy navigation and setting adjustments.
그림 1: 앞쪽 view 의 Webasto MultiControl Timer. The display shows the current time (09:01) and icons for heating (Heizen) and fan operation. A rotary knob and power button are visible on the right.
그림 2: 옆 view 의 Webasto MultiControl Timer, illustrating its compact design and the connection point for the power and data cable.
주요 구성 요소:
- 디스플레이 화면: Shows time, operating mode, temperature, and menu options.
- 회전식 손잡이: Used for navigating menus and adjusting settings. Press to confirm selections.
- 전원 버튼: Turns the heater on/off or accesses quick functions.
설정 및 설치
Proper installation is crucial for the correct functioning of the MultiControl Timer. It is recommended that installation be performed by a certified Webasto service partner.
1. 전기 연결:
Connect the MultiControl Timer to the heater's control unit using the provided wiring harness. Ensure all connections are secure and correctly polarized. Refer to the wiring diagram in your main heater manual for specific connection points.
그림 3: Excerpt from the electrical system diagram, showing connectors for optional control elements like the MultiControl (X9c) and Combi timer (X9a). This illustrates typical connection points for the control unit.
2. Initial Start-up and Heater Selection:
Upon first connection, the MultiControl Timer may display a message indicating missing configuration. You will need to select your specific heater model.
- Press the control knob and the quick-start knob simultaneously for 3 seconds to enter the configuration menu.
- Navigate to the "Heater" menu element using the rotary knob.
- Press the control knob to select the desired heater model (e.g., Air Top Evo 3900/5500).
그림 4: Instructions for selecting the heater model during initial setup. The display shows "Air Top Evo 3900/5500" as an example selection under the "Heater" menu.
The MultiControl Timer is compatible with various Webasto heaters. For detailed compatibility, refer to the official Webasto documentation or consult a service professional.
작동 지침
The MultiControl Timer offers several operating modes and functions for optimal climate control.
1. 켜기/끄기:
- 켜려면: Press the power button briefly. The display will show the current operating mode.
- 끄기: Press and hold the power button until the display turns off or indicates standby mode.
2. Setting Temperature and Mode:
- Rotate the knob to navigate through available modes (e.g., Heating, Ventilation).
- Press the knob to select a mode.
- In heating mode, rotate the knob to adjust the desired temperature. Press the knob to confirm.
3. Timer Functions:
The MultiControl Timer allows you to program up to three start times for your heater.
- From the main screen, rotate the knob to access the timer menu.
- Select a timer slot (e.g., Timer 1, Timer 2, Timer 3).
- Set the desired start time, operating duration, and mode (heating/ventilation) for each timer.
- Activate the timer by selecting "ON" for the specific timer slot.
The timer will automatically activate the heater at the programmed time and run for the set duration.
유지
그만큼 Webasto MultiControl Timer requires minimal maintenance. Regular cleaning will help ensure its longevity and proper function.
- 청소: 디스플레이를 닦고 casing는 부드러운 d로 발음합니다.amp 천을 사용하십시오. 연마성 세제, 용제 또는 과도한 습기를 사용하지 마십시오.
- 점검: 배선 연결부에 마모나 손상 흔적이 있는지 주기적으로 점검하십시오.
- 소프트웨어 업데이트: 상담하세요 Webasto service partner for information on potential software updates for your MultiControl Timer.
문제 해결
If you encounter issues with your MultiControl Timer, refer to the following common problems and solutions:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 디스플레이가 비어 있습니다. | No power, loose connection, or device fault. | Check power supply to the heater system. Verify all wiring connections are secure. If problem persists, contact service. |
| Heater does not start via timer. | Timer not activated, incorrect time setting, or heater fault. | Ensure the timer is activated ("ON"). Verify the correct time and date are set. Check the main heater for error codes. |
| "Missing configuration" message. | Heater model not selected or recognized. | Perform the initial setup steps to select your heater model (refer to "Setup" section). |
| Buttons/knob unresponsive. | 일시적인 소프트웨어 오류 또는 하드웨어 문제입니다. | Try disconnecting and reconnecting power to the heater system (if safe to do so). If unresponsive, contact service. |
For complex issues or error codes displayed on the unit, please consult a qualified Webasto service technician.
명세서
| 특징 | 세부 사항 |
|---|---|
| 상표 | Web아스 토 |
| 모델 번호 | 9030910디 |
| 품목 무게 | 10 온스 |
| 패키지 크기 | 7.17 x 5.39 x 1.54 인치 |
| 호환성 | Webasto Air Top Evo 12V or 24V heaters (and others as per compatibility chart) |
| 첫 번째 가능한 날짜 | 22년 2018월 XNUMX일 |
보증 정보
Webasto products are manufactured to high quality standards. For specific warranty terms and conditions applicable to your MultiControl Timer, please refer to the warranty card included with your product or visit the official Web아스 토 web사이트. 보증 청구를 위해 구매 증빙 자료를 보관하세요.
고객 지원
For technical assistance, troubleshooting beyond this manual, or to locate an authorized service center, please contact Webasto customer support or visit their official website. Contact information can typically be found on the product packaging or the Webasto global web대지.
Webasto Official Web대지: www.webasto.com
