1. 서론
구매해주셔서 감사합니다asing the Audiolab M-ONE Integrated Amplifier. The M-ONE is a compact yet powerful stereo integrated amplifier featuring an advanced DSD Digital-to-Analog Converter (DAC) and Bluetooth connectivity. It is designed to deliver high-fidelity audio performance from a variety of digital and analog sources, making it a versatile centerpiece for your audio system.
This manual provides essential information for the safe and optimal operation of your M-ONE unit. Please read it thoroughly before use and retain it for future reference.
2. 안전 정보
감전, 화재 또는 제품 손상을 방지하기 위해 다음 안전 수칙을 준수하십시오.
- 전원: Connect the unit only to an AC power source of the type indicated on the rear panel. Ensure the voltage는 해당 지역에서 올바른 표현입니다.
- 통풍: Ensure adequate ventilation. Do not block ventilation openings or place the unit on soft surfaces that may impede airflow. Maintain a minimum distance of 10cm (4 inches) around the unit for proper heat dissipation.
- 물과 습기: 제품을 비, 습기, 물방울 또는 물 튀김에 노출시키지 마십시오. 꽃병과 같이 액체가 담긴 물건을 제품 위에 올려놓지 마십시오.
- 열: 라디에이터, 난방 조절기, 스토브 또는 기타 장치(다음 포함)와 같은 열원 근처에 장치를 두지 마십시오. amp열을 생성하는 발전기.
- 이물질: Do not insert any objects into the unit's openings. If a foreign object enters the unit, disconnect the power cable immediately and contact qualified service personnel.
- 서비스: 이 제품을 직접 수리하려고 하지 마십시오. 모든 서비스는 자격을 갖춘 서비스 담당자에게 문의하십시오.
- 청소: Unplug the unit from the wall outlet before cleaning. Use a soft, dry cloth only. Do not use liquid or aerosol cleaners.
3. 패키지 내용
Carefully unpack the unit. The carton should contain:
- Audiolab M-ONE Integrated Amp리퍼
- AC 전원 케이블
- 원격 제어
- USB 케이블
- 사용 설명서 (본 문서)
누락되거나 손상된 항목이 있는 경우 즉시 대리점에 문의하십시오.
4. 제품 오버view
4.1 전면 패널
그림 4.1: 전면 view of the Audiolab M-ONE, showing the OLED display, two rotary controls, headphone jack, and power button.
- 헤드폰 출력: 헤드폰 연결용 6.3mm 잭.
- SEL (Selector) Knob: Rotates to select input sources. Press to confirm selection or enter menu.
- OLED 디스플레이: Shows current input, volume level, and menu information.
- 볼륨 조절 노브(VOL): Rotates to adjust volume level. Press to mute/unmute.
- 전원 버튼: 기기를 켜거나 끄려면 누르세요(대기 모드).
- M-ONE Indicator: 전원 상태를 나타내는 LED 표시등.
4.2 후면 패널
그림 4.2: 후면 view of the Audiolab M-ONE, displaying various input and output terminals, including power, speaker outputs, digital inputs (Coaxial, Optical, USB), and analog inputs (AUX).
- 전원 스위치: 메인 전원 ON/OFF 스위치.
- AC 전원 인렛: Connects to the supplied AC power cable.
- 스피커 터미널 : Connect your passive loudspeakers here. Ensure correct polarity (+ to + and - to -).
- 디지털 입력 :
- 같은 축의: 디지털 동축 입력.
- 광학: Digital optical (Toslink) input.
- USB B: USB Type B input for connecting to a computer.
- Analog Inputs (AUX): RCA stereo inputs for analog sources.
- 12V 트리거: For synchronized power control with other compatible components.
5. 설정
5.1 배치
Place the M-ONE on a stable, level surface away from direct sunlight, heat sources, and excessive moisture. Ensure there is sufficient space around the unit for proper ventilation, especially above the top panel.
5.2 스피커 연결
Connect your passive loudspeakers to the speaker terminals on the rear panel. Ensure that the positive (+) terminal of the M-ONE is connected to the positive (+) terminal of your speaker, and the negative (-) terminal of the M-ONE is connected to the negative (-) terminal of your speaker. Use high-quality speaker cables for optimal performance.
주의:
- Ensure the M-ONE is powered off before making any speaker connections.
- Do not short-circuit the speaker terminals.
5.3 Source Connection
오디오 소스를 후면 패널의 해당 입력 단자에 연결하십시오.
- Digital Sources (CD Player, Streamer, TV): Use coaxial, optical, or USB cables to connect to the respective digital inputs. For computer connection, use the USB B input.
- Analog Sources (Turntable with Phono Preamp, Tape Deck): Use RCA cables to connect to the AUX inputs.
5.4 전원 연결
Once all audio connections are made, connect the supplied AC power cable to the AC power inlet on the rear panel of the M-ONE and then to a suitable wall outlet.
6. 사용 설명서
6.1 전원 켜기/끄기
First, ensure the main power switch on the rear panel is in the 'ON' position. Then, press the Power Button on the front panel to switch the M-ONE from standby to operational mode. Press it again to return to standby.
6.2 입력 선택
회전하다 셀 knob on the front panel to cycle through the available input sources (e.g., COAX, OPT, USB, AUX, BT). The selected input will be displayed on the OLED screen. Press the 셀 선택을 확인하려면 노브를 누르세요.
6.3 볼륨 조절
회전하다 권 knob on the front panel clockwise to increase the volume and counter-clockwise to decrease it. The current volume level will be shown on the OLED display. Press the 권 knob to mute or unmute the audio output.
6.4 블루투스 페어링
블루투스 장치를 연결하려면:
- Select the 'BT' input using the 셀 knob. The display will show "BT Pairing".
- 모바일 기기(스마트폰, 태블릿 등)에서 Bluetooth를 활성화하고 사용 가능한 기기를 검색하세요.
- Select "Audiolab M-ONE" from the list of devices.
- Once paired, the display will indicate a successful connection, and you can now stream audio wirelessly to the M-ONE.
6.5 DAC Functionality
The M-ONE features a high-performance DSD DAC. When a digital input (COAX, OPT, USB) is selected, the M-ONE will automatically process the digital audio signal. For USB connection to a computer, you may need to install specific drivers, which can typically be found on the Audiolab website. Refer to your computer's audio settings to select the M-ONE as the output device.
6.6 헤드폰 출력
Connect your headphones to the 6.3mm headphone jack on the front panel. When headphones are connected, the loudspeaker output will automatically be muted.
6.7 메뉴 탐색 및 설정
The M-ONE offers various settings accessible via the OLED display and rotary controls. Press and hold the 셀 knob to enter the main menu. Use the 셀 knob to navigate through options and the 권 knob to change values. Press 셀 to confirm or exit a submenu. Available settings may include:
- 디지털 필터 : Select different digital filter characteristics for the DAC.
- 디스플레이 밝기: OLED 디스플레이의 밝기를 조정합니다.
- Standby Timer: Set a timer for automatic standby.
- Volume on Power On: Configure the initial volume level when the unit powers on.
7. 유지관리
To ensure the longevity and optimal performance of your Audiolab M-ONE, follow these maintenance guidelines:
- 청소: Use a soft, dry, lint-free cloth to clean the exterior surfaces. Do not use abrasive cleaners, waxes, or solvents, as these can damage the finish.
- 통풍: Periodically check that the ventilation slots are clear of dust and debris. Use a soft brush or a vacuum cleaner with a brush attachment to gently remove any accumulation.
- 사이: Ensure all cables are securely connected. Loose connections can lead to poor audio quality or intermittent issues.
- 저장: 장기간 보관할 경우 전원을 분리하고 시원하고 건조한 곳에 보관하세요. 원래 포장 상태로 보관하는 것이 좋습니다.
8. 문제 해결
If you experience issues with your M-ONE, consult the following table before contacting service personnel:
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| 전원이 없습니다 | Power cable not connected; Rear power switch off; Unit in standby. | Check power cable connection; Ensure rear power switch is ON; Press front panel power button. |
| 스피커에서 소리가 나지 않음 | Incorrect input selected; Volume too low; Speakers not connected; Mute activated; Headphones connected. | Select correct input; Increase volume; Check speaker connections; Press VOL knob to unmute; Disconnect headphones. |
| 헤드폰에서 소리가 나지 않음 | Headphones not fully inserted; Volume too low; Mute activated. | Ensure headphones are fully inserted; Increase volume; Press VOL knob to unmute. |
| 블루투스가 페어링되지 않습니다 | M-ONE not in pairing mode; Device too far; Interference. | Select BT input; Ensure M-ONE is discoverable; Move device closer; Reduce interference. |
| 왜곡된 소리 | Source signal too high; Speaker impedance mismatch; Damaged cables. | Reduce source volume; Check speaker impedance compatibility; Inspect and replace cables if necessary. |
9. 사양
The following specifications are typical for the Audiolab M-ONE:
- 출력 전력: 80 watts per channel (into 8 ohms)
- 디지털 입력 : Coaxial, Optical, USB Type B
- 아날로그 입력 : RCA(보조)
- 무선 연결 : 블루투스
- DAC : DSD compatible
- 치수(길이 x 너비 x 높이): 13.7 x 11.5 x 4.4인치(34.8 x 29.2 x 11.2cm)
- 무게: 16.58파운드(7.52kg)
- 권tage: 12 Volts (Internal power supply handles AC100-115V/50-60Hz)
- 제조업체: 오디오랩
- 모델 번호: 엠원
참고 : 사양은 예고없이 변경 될 수 있습니다.
10. 보증 및 지원
Audiolab products are manufactured to the highest standards and are designed for reliable performance. This product is covered by a limited warranty, the terms of which may vary by region. Please refer to the warranty card included with your product or contact your local Audiolab dealer or distributor for specific warranty details.
For technical support, troubleshooting assistance beyond this manual, or service inquiries, please contact your authorized Audiolab dealer or visit the official Audiolab web연락처 정보 사이트.
Web대지: www.audiolab.co.uk
