PROFLO PF93024

PROFLO PF93024 Submersible Sewage Pump Kit User Manual

Model: PF93024 | Brand: PROFLO

소개

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your PROFLO PF93024 1/2 Horsepower Submersible Sewage Pump Kit. Please read this manual thoroughly before attempting to install or operate the pump. Retain this manual for future reference.

중요한 안전 정보

Failure to follow these instructions may result in serious injury, death, or property damage. Always observe all local codes and ordinances.

제품 구성 요소

The PROFLO PF93024 Submersible Sewage Pump Kit includes the following main components:

PROFLO PF93024 Submersible Sewage Pump Kit with pump and float switch inside a basin

Image 1: PROFLO PF93024 Submersible Sewage Pump Kit. This image shows the main components: the cast iron pump, the tethered float switch, and the surrounding basin.

클로즈업 view of the PROFLO PF93024 pump and float switch assembly

이미지 2: 상세 view of the PROFLO PF93024 pump and float switch. This image provides a closer look at the pump's body, the tethered float switch mechanism, and the discharge pipe connection.

기술 사양

특징사양
모델 번호피에프93024
상표프로필
마력1 / 2 HP
권tage12볼트(DC)
재료주철
스타일잠수 가능
최대 유량분당 80갤런(GPM)
최대 들어올리기 높이(머리)25 피트
품목 무게25 파운드
제품 치수28 x 28 x 24.13 인치
스위치 유형테더 플로트 스위치

설정 및 설치

Proper installation is crucial for the safe and efficient operation of your sewage pump. If you are unsure about any step, consult a qualified professional.

1. 설치 전 체크리스트

2. 비asin 준비

  1. Ensure the pump basin 깨끗하고 쓰레기가 없습니다.
  2. b의 위치asin in its final location, ensuring it is level and secure.

3. 펌프 배치

  1. 펌프를 조심스럽게 b 안으로 내려놓으세요asin. Ensure it rests on a solid, level surface at the bottom of the basin.
  2. Position the tethered float switch so it can move freely and is not obstructed by the pump, basin walls, or piping. The float switch determines the pump's on/off cycles.

4. 배관 연결

  1. Connect the discharge pipe to the pump's outlet. Use appropriate fittings and sealant to ensure a watertight connection.
  2. Install a check valve in the discharge line above the pump to prevent backflow.
  3. Route the discharge pipe to the main sewer line or septic system according to local codes.

5. 전기 연결

  1. 경고: Ensure power is OFF at the circuit breaker before making any electrical connections.
  2. Connect the pump's power cord to a dedicated 12 Volt DC power supply.
  3. Ensure all electrical connections are secure, waterproof, and comply with local electrical codes.
  4. Verify proper grounding of the pump and power supply.

6. 최종 확인

  1. Double-check all plumbing and electrical connections for tightness and security.
  2. Ensure the float switch has a full range of motion.

작동 지침

The PROFLO PF93024 pump operates automatically via its tethered float switch.

자동운전

  1. Once properly installed and connected to power, the pump will remain off as long as the liquid level in the basin is below the "turn-on" point of the float switch.
  2. As the liquid level rises, the tethered float switch will float upwards.
  3. When the float switch reaches its horizontal or slightly upward position (depending on its tether length), it will activate the pump.
  4. The pump will then begin to discharge the sewage/effluent from the basin.
  5. As the liquid level drops, the float switch will lower.
  6. When the float switch reaches its "turn-off" point, the pump will automatically shut off.
  7. This cycle will repeat as needed to maintain appropriate liquid levels in the basin.

Initial Start-up and Testing

  1. After installation, restore power to the pump.
  2. b를 채우세요asin with water to simulate sewage inflow. Observe the float switch.
  3. The pump should turn on when the water level reaches the float's activation point and pump out the water.
  4. The pump should turn off when the water level drops below the float's deactivation point.
  5. Check for any leaks in the plumbing connections during operation.

유지

Regular maintenance ensures the longevity and reliable operation of your PROFLO sewage pump. Always disconnect power before performing any maintenance.

월간 수표

Annual Inspection (Recommended by a Qualified Professional)

청소: If the pump or basin requires cleaning, disconnect power, remove the pump, and clean with appropriate tools and disinfectants. Wear proper PPE.

문제 해결

Before attempting any repairs, always disconnect power to the pump. Consult a qualified professional for complex issues.

문제가능한 원인해결책
펌프가 켜지지 않습니다.No power; Float switch stuck or defective; Clogged impeller.Check power supply/breaker; Inspect float switch for obstructions; Disconnect power and clear impeller.
펌프가 지속적으로 작동합니다.Float switch stuck in "on" position; Check valve leaking; Constant inflow.Inspect float switch; Check/replace check valve; Investigate source of constant inflow.
펌프는 작동하지만 물을 펌핑하지 않습니다.Clogged discharge pipe; Air lock; Impeller damaged or clogged.Clear discharge pipe; Bleed air from pump (if applicable); Disconnect power and inspect/clear impeller.
펌프에 소음이 있습니다.Debris in pump; Worn bearings; Pump not seated properly.Disconnect power and clear debris; Contact service for worn bearings; Re-seat pump.

보증 정보

The PROFLO PF93024 Submersible Sewage Pump Kit is covered under PROFLO's 3년 한정 보증이 보증은 정상적인 사용 및 서비스 조건에서 발생하는 재료 및 제조상의 결함에 적용됩니다.

For full warranty terms and conditions, please refer to the official PROFLO warranty documentation provided with your purchase or visit the PROFLO web대지.

모든 보증 청구에는 구매 증빙이 필요합니다.

고객 지원

If you have any questions, require technical assistance, or need to report a problem with your PROFLO PF93024 pump, please contact PROFLO customer support.

For the most current contact information, please visit the official PROFLO web해당 웹사이트를 참조하거나 포장재를 확인하세요.

온라인 리소스: Visit the PROFLO Store on Amazon

관련 문서 - 피에프93024

사전view PROFLO Pumps and Accessories Catalog - Durable and Reliable Pumping Solutions
Explore the comprehensive range of PROFLO pumps and accessories, including submersible utility pumps, sump pumps, sewage pumps, and more. Built to last with quality components for residential and commercial applications.
사전view PROFLO Submersible Sump Pump Installation and Operation Manual
Comprehensive installation, operation, maintenance, troubleshooting, and warranty information for PROFLO submersible sump pumps, including models PF92331, PF92341, PF92352, PF92352-25, PF92501, and PF92511. This manual provides essential safety guidelines, specifications, and parts information.
사전view PROFLO 심플렉스 하수 펌프 키트 설치 및 작동 설명서 | PF93015, PF93020
PROFLO Simplex 하수 펌프 키트(모델 PF93015 및 PF93020)의 설치, 작동, 유지 관리 및 문제 해결에 대한 종합 안내서입니다. 안전 지침, 사양, 성능 데이터 및 보증 정보가 포함되어 있습니다.
사전view PROFLO PFXC8027 Faywood 싱글 핸들 풀다운 주방 수도꼭지 사양
제품 기능, 모델 번호, 치수, 보증 및 인증을 포함한 PROFLO PFXC8027 Faywood 싱글 핸들 풀다운 주방 수도꼭지에 대한 자세한 사양입니다.
사전view PROFLO 변기 시트 설치 및 청소 가이드
PFTSHEC1000WH, PFTSHEC1000BS, PFTSHEC2000WH, PFTSHEC2000BS 모델을 포함한 PROFLO 변기 시트 설치 및 세척에 대한 종합 가이드입니다. 간편한 설치 단계와 들어 올리고 당기는 세척 방법을 안내합니다.
사전view PROFLO 변기 시트 설치 및 청소 가이드
PFTSEC1000WH, PFTSEC2000WH, PFTSEC2000BS 모델을 포함한 PROFLO 변기 시트 설치 및 세척을 위한 단계별 설명서입니다. 간편한 설치와 들어 올려서 세척하는 방식을 제공합니다.