소개
Thank you for choosing the Znewtech Home & Office Timer with Clock. This innovative digital timer is designed to enhance your time management and productivity, whether for work, study, or daily tasks. Its intuitive design allows for quick and easy setup and operation, featuring preset countdown times and a clear LCD display.
주요 특징은 다음과 같습니다.
- A stylish and innovative digital desk timer with clock functionality.
- Simple operation: turn the timer to its desired preset position to start a countdown.
- Clear LCD screen displaying the remaining countdown time.
- Adjustable volume control with three levels: High, Low, and Silent.
- Flashing backlit visual alert for discreet notifications.
패키지 내용
패키지에 모든 품목이 들어 있는지 확인하세요.
- 1 x Znewtech Home & Office Timer (Cyan)
- 1 x 사용자 설명서
설정
배터리 설치
The Znewtech Timer requires 2 AAA batteries (not included). To install:
- 타이머 뒷면에서 배터리 구획을 찾으세요.
- 배터리 덮개를 살살 밀어서 여세요.
- 배터리 2개를 넣고, 배터리 칸 안쪽에 표시된 대로 극성(+/-)을 올바르게 맞춰 넣으세요.
- 배터리 덮개를 단단히 닫으세요.
이미지: 후면 view of the timer, highlighting the battery compartment and control buttons for setup.
시계 설정
After installing batteries, the clock display will activate. To set the time:
- 를 누르세요 세트 button on the back of the timer to enter time setting mode. The hour digits will flash.
- 사용하세요 UP 그리고 아래에 버튼으로 시간을 조정합니다.
- 누르다 세트 다시 분 설정으로 이동합니다. 분 숫자가 깜빡입니다.
- 사용하세요 UP 그리고 아래에 버튼을 사용하여 분을 조정합니다.
- 누르다 세트 다시 한 번 확인 후 시간 설정 모드를 종료합니다.
- 12시간 형식과 24시간 형식을 전환하려면 다음을 누릅니다. 방법 button while in clock display mode.
작동 지침
Using Preset Countdown Timers
The Znewtech Timer features five preset countdown durations: 5, 15, 30, 45, and 60 minutes. To activate a timer:
- Ensure the timer is in clock display mode.
- Simply rotate the timer so that the desired preset time (e.g., "5 min", "15 min") is facing upwards. The countdown will begin automatically.
- The LCD screen will display the remaining time.
- When the countdown reaches zero, the alarm will sound, and the backlight will flash (if enabled).
- To stop the alarm, simply rotate the timer to a different side or press the "SNOOZE/LIGHT" button on top.
이미지: 앞면 view of the timer, illustrating the preset time markings on each side.
Image: The timer in use on a desk, demonstrating its practical application.
클럭 모드
To return the timer to clock display mode, rotate it so the side marked "Clock" (indicated by a square icon) is facing upwards. The current time will be displayed.
볼륨 조절
The timer offers three volume settings: High, Low, and Silent. To adjust the volume:
- Locate the volume control button/switch on the back of the timer (often labeled with a speaker icon).
- Press or slide to cycle through the available volume levels.
- In Silent mode, the timer will rely solely on the flashing backlit visual alert.
스누즈/조명 기능
Press the "SNOOZE/LIGHT" button located on the top of the timer to temporarily silence an active alarm or to illuminate the display backlight for a few seconds in low-light conditions.
Image: The timer's backlit display, visible in a dark environment.
유지
To ensure the longevity and optimal performance of your Znewtech Timer:
- 청소: 부드럽고 마른 천으로 타이머를 닦으십시오. 연마성 세제를 사용하거나 물에 담그지 마십시오.
- 배터리 교체: Replace batteries promptly when the display becomes dim or the timer functions erratically. Always use fresh AAA batteries.
- 저장: 장기간 사용하지 않을 때는 타이머를 서늘하고 건조한 곳에 보관하십시오.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Timer not starting/Display blank | 배터리 잔량이 부족하거나 방전된 경우; 배터리가 잘못 설치된 경우. | Replace batteries with new AAA batteries. Ensure correct polarity. |
| 알람이 울리지 않음 | Volume set to Silent; Speaker obstructed. | Check volume setting and adjust to High or Low. Ensure speaker on back is clear. |
| LCD display appears dim or blurry when inverted (e.g., 30 min side up) | Viewing angle sensitivity of LCD. | 조정하세요 viewing angle or position the timer at eye level for optimal clarity. |
| Timer does not register rotation for 5-minute setting | Internal mechanism needs slight adjustment. | Gently shake the timer or rotate it slightly to ensure the internal mechanism engages. |
| Clock time resets unexpectedly | Batteries jostled or briefly disconnected. | Re-set the clock time. Ensure batteries are firmly seated in the compartment. Avoid strong impacts. |
명세서
| 모델 번호 | ZNT-ZT-X1C |
| 상표 | 지뉴텍 |
| 색상 | 시안 |
| 재료 | 플라스틱 |
| 제품 크기(D x W x H) | 1.5인치 x 4.75인치 x 4.25인치 |
| 품목 무게 | 322그램(11.4온스) |
| Number of Preset Settings | 5 (5, 15, 30, 45, 60 minutes) |
| 전원 | AAA 배터리 2개(포함되지 않음) |
| 한국어: | 742567526554 |
| 원산지 | 중국 |
보증 및 지원
The Znewtech Home & Office Timer comes with a 1년 보증 구매일로부터. 본 보증은 정상적인 사용 중에 발생한 제조상의 결함 및 제조상의 결함을 보장합니다.
For warranty claims, technical support, or any questions regarding your product, please contact Znewtech customer service through the retailer's platform or visit the official Znewtech store on Amazon: Znewtech Store.
Please have your model number (ZNT-ZT-X1C) and proof of purchase ready when contacting support.
