STAPLES Hyken Ergonomic Office Chair Instruction Manual

소개

Thank you for choosing the STAPLES Hyken Ergonomic Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new chair. Please read it thoroughly before use and retain it for future reference.

안전 정보

• 조립하기 전에 모든 부품이 있고 손상이 없는지 확인하세요. 부품이 없거나 파손된 경우 사용하지 마세요.
• 긁힘을 방지하려면 부드럽고 깨끗한 표면에 의자를 조립하세요.
• 의자 위에 서지 마세요.
• 의자를 발판으로 사용하지 마십시오.
• This chair is designed to support a maximum weight of 275 pounds.
• 조정하는 동안 움직이는 부품에 어린이가 접근하지 못하도록 하십시오.
• Regularly check all bolts, screws, and knobs to ensure they are tightened.
• 이 의자는 사무실 의자로서의 원래 용도로만 사용하세요.

설정 및 조립

The STAPLES Hyken Ergonomic Office Chair requires assembly. All necessary hardware and tools are included in the packaging. For detailed, step-by-step instructions, please refer to the dedicated assembly guide provided with your chair. Assembly typically takes approximately 2 hours for one person.

작동 지침

Your Hyken Ergonomic Office Chair offers multiple adjustment options to customize your seating experience for optimal comfort and support.

1. 좌석 높이 조절

Locate the lever under the right side of the seat. Pull the lever upwards while seated to lower the seat, or pull it upwards while standing to raise the seat. Release the lever at your desired height.

2. Armrest Height Adjustment

Press the button located on the side of each armrest support. While holding the button, move the armrest up or down to your preferred height. Release the button to lock the armrest in place. The armrests also offer width adjustment by sliding them in or out before tightening the bolts underneath.

3. 요추 지지대 조정

The chair features adjustable lumbar support. Gently push the lumbar support up or down along the backrest to find the position that best supports the natural curve of your lower back.

4. 헤드레스트 조절

The headrest can be adjusted for both height and angle. Move the headrest up or down to align with your neck and head. You can also tilt it forward or backward to achieve optimal comfort and support.

5. Reclining and Tilt Mechanism

The chair features a swivel-tilt mechanism with an upright tilt lock and tension knob. To recline, pull the lever (usually on the left side) outwards. To lock the chair in an upright position, push the lever inwards. The tilt tension knob, located underneath the seat, allows you to adjust the resistance of the recline. Turn it clockwise to increase tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).

6. 이동성

The chair is equipped with sturdy carpet casters for smooth rolling across various office surfaces, including carpet and hardwood.

유지

To ensure the longevity and optimal performance of your STAPLES Hyken Ergonomic Office Chair, follow these maintenance guidelines:

• 청소: 광고로 깨끗이 닦아내세요amp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the mesh fabric or frame.
• 메쉬 소재: The 100% mesh fabric is breathable and durable, providing comfort in various temperatures. It allows for air circulation, reducing heat buildup during extended use.
• 패스너: 모든 나사, 볼트 및 연결부가 단단히 고정되었는지 주기적으로 점검하십시오. 필요한 경우 조이십시오.

문제 해결

의자에 문제가 발생하면 다음과 같은 일반적인 해결책을 고려해 보세요.

• 삐걱거리는 소리: Check and tighten all screws and bolts. Applying a small amount of silicone lubricant to moving parts may help.
• 높이 조절의 어려움: Ensure the height adjustment lever is fully engaged or disengaged. Check for any obstructions under the seat.
• 불안정한 의자: Verify that all legs are properly attached and all fasteners are tightened. Ensure the chair is on a flat, even surface.
• 등받이 각도 조절 문제: Check the tilt tension knob. If the chair is too stiff or too loose, adjust the tension accordingly. Ensure the tilt lock is disengaged if you wish to recline.

명세서

보증 및 지원

The STAPLES Hyken Ergonomic Office Chair comes with a 7년 한정 보증. For warranty claims, technical support, or any inquiries regarding your product, please contact STAPLES customer service. Refer to your purchase documentation for specific contact details.