PROFLO PF4001 Series Pressure Balanced Tub and Shower Faucet Valve User Manual
Model: PROFLO PF4001
제품 끝view
The PROFLO PF4001 Series Pressure Balanced Tub and Shower Faucet Valve is engineered for reliable performance and consistent water temperature. Featuring a durable cast bronze valve body and a one-piece ceramic disc cartridge, this valve ensures long-lasting operation and ease of maintenance. Its pressure-balancing mechanism helps prevent sudden temperature changes, providing a comfortable and safe showering experience.
Image: The PROFLO PF4001 Pressure Balanced Tub and Shower Faucet Valve, showcasin황동 재질과 연결 부위가 특징입니다.
안전 정보
경고: 부상이나 재산 피해를 방지하기 위해 설치 및 사용 전에 모든 지침을 주의 깊게 읽으십시오.
- 설치나 유지관리를 시작하기 전에 항상 주 수도 공급을 차단하세요.
- 안전 안경, 장갑 등 적절한 개인 보호 장비(PPE)를 착용하세요.
- 급수 재개 전에 모든 연결부가 단단히 고정되어 있고 누수가 없는지 확인하십시오.
- 설치 과정 중 확실하지 않은 부분이 있으면 자격을 갖춘 배관공에게 문의하십시오.
- 이 제품에는 캘리포니아주에서 암과 선천적 기형 또는 기타 생식 기능 장애를 유발하는 것으로 알려진 화학 물질이 포함되어 있습니다(제안 65호 경고).
패키지 내용
설치를 시작하기 전에 모든 구성 요소가 있는지 확인하세요.
- PROFLO PF4001 Pressure Balanced Tub and Shower Faucet Valve (1)
- Installation Instructions (1) - (Refer to the official PDF document for detailed diagrams: 설치 설명서 PDF)
- 보증 정보(1)
설치 지침
This section provides general guidance. For detailed, step-by-step instructions and diagrams, please refer to the official installation manual provided with your product or download it from the link above.
필요한 도구 및 재료(포함되지 않음):
- 조절 렌치
- 파이프 커터
- Soldering torch and solder (for SWT connections)
- 나사산 밀봉 테이프(PTFE 테이프)
- 줄자
- 드라이버
사전 설치 단계:
- Turn off the main water supply to the house.
- Drain the water lines by opening the lowest faucet in the house.
- Clear the work area and ensure adequate lighting.
밸브 장착:
- Position the valve body within the wall cavity, ensuring it is plumb and at the correct depth relative to the finished wall surface.
- Secure the valve body to the framing using appropriate fasteners through the mounting bracket.
수도관 연결:
- Connect the hot water supply line to the port marked "HOT" and the cold water supply line to the port marked "COLD". The valve supports 1/2" MIP and SWT connections.
- Connect the top port to the showerhead riser and the bottom port to the tub spout.
- Ensure all connections are watertight. For threaded connections, use thread sealant tape. For soldered connections, follow standard plumbing practices.
설치 후 점검:
- 주요 물 공급장치를 천천히 켜세요.
- Inspect all connections for leaks. Tighten any leaking connections.
- Flush the lines by running water through the valve for a few minutes to clear any debris.
작동 지침
The PROFLO PF4001 valve is designed for simple and safe operation.
온도 조절:
- The pressure-balanced cartridge automatically adjusts water pressure to maintain a consistent temperature, even if there are pressure fluctuations in your hot or cold water supply.
- Rotate the handle (once installed with trim kit, sold separately) to adjust the water temperature from cold to hot.
흐름 제어:
- The handle also controls the water flow. Turn the handle to increase or decrease the flow rate.
- To turn off the water, rotate the handle to the fully closed position.
유지
Regular maintenance will ensure the longevity and optimal performance of your PROFLO PF4001 valve.
청소:
- Clean the visible parts of the valve (once trim is installed) with a soft cloth and mild soap.
- Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and internal components.
카트리지 교체:
- The one-piece ceramic disc valve cartridge is designed for durability. If you experience persistent leaks or difficulty controlling temperature/flow, the cartridge may need replacement.
- To replace the cartridge, turn off the water supply, remove the trim, and follow the specific instructions provided with a replacement cartridge kit.
문제 해결
| 문제 | 가능한 원인 | 해결책 |
|---|---|---|
| Water leaks from valve body. | 연결 부위가 헐거워졌거나, O링 또는 카트리지가 손상되었을 수 있습니다. | Turn off water supply. Tighten connections. Inspect and replace O-rings or cartridge if damaged. |
| 물의 온도가 일정하지 않습니다. | Debris in cartridge; faulty pressure balance cartridge. | Flush lines. Clean or replace the ceramic disc cartridge. |
| 낮은 물 흐름. | Debris in valve or supply lines; partially closed shut-off valves. | Check that supply shut-off valves are fully open. Flush lines. Inspect cartridge for blockages. |
| 물이 흐르지 않습니다. | Main water supply off; severe blockage. | Check main water supply. Inspect for severe blockages in lines or valve. |
If troubleshooting steps do not resolve the issue, contact a qualified plumber or PROFLO customer support.
명세서
| 특징 | 세부 사항 |
|---|---|
| 모델 번호 | PROFLO PF4001 |
| 재료 | 놋쇠 |
| 밸브 유형 | 압력 균형 밸브 |
| 사이 | 1/2" MIP and SWT |
| 카트리지 타입 | Ceramic Disc (One-piece design) |
| 외부 마감 | Bronze (Valve body) |
| 포트 수 | 1 |
| 품목 무게 | 1.79파운드 |
| 패키지 크기 | 5.6 x 5.6 x 5.1 인치 |
| 인증 | IAPMO, ASSE |
보증 및 지원
PROFLO products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty information included with your product or visit the official PROFLO web대지.
For technical assistance, replacement parts, or further inquiries, please contact PROFLO customer support. Have your model number (PF4001) and purchase date ready when contacting support.
추가 리소스와 제품 정보는 다음에서 찾을 수도 있습니다. ProFlo Amazon Store.
